Mathematical modeling of processes of electro-magnetic fields' effects on thin conducting plates by complex form (original) (raw)
Related papers
Application of the Effective Impedance Method for in Situ Ellipsometric Analysis of Magnetic Films
Physical and Chemical Aspects of the Study of Clusters Nanostructures and Nanomaterials, 2013
The technique of effective surface impedance is proposed and applied as useful tool for non-destructive in situ characterisation of optical and magneto-optical parameters of magnetic heterostructures. Standard ellipsometry analysis requires the model response to be calculated from every layer in the structure. For any ellipsometry investigations a proper choice of a physical model is important for solving the inverse problem by a regression method. Reasonable approximations used for in situ ellipsometry monitoring are assumptions of a constant rate of layer growth and stable optical parameters. In this case a method of a pseudosubstrate is used which approximates the underlying structure as a single interface (so called virtual interface), rather than tracking the entire sample history. The virtual interface is placed at some level and growth is modelled on this interface with no knowledge retained for the underlying structure.Magneto-optical spectra were detected in the configurati...
Influence of Electric Field on Adhesion and Structure of Conducting Films on Dielectric Substances
IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENIY KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA
Some results are provided confirming that modifying of the zinc films fabricated on glass substrates by a resulting effect of heat treatment in an atmosphere of dry air and action of cross electric field is possible. Using scanning electron microscopy (measured with the Zeiss Merlin microscope) the surface morphology of the films was studied. Also, the elemental composition of the films by micro-X-ray spectral analysis was studied. On the glass substrates, by the method of vacuum thermal evaporation, zinc films (Zn) with thickness of ~ 500 nm were obtained. In order to form ZnO films, the original films were treated at 250 °C in a dry air atmosphere, and in another case - in addition to the sample a transverse electric field with a potential of 300 V was applied. Platinum films on the silicon dioxide layer were obtained using the method of the ion-plasma sputtering. These layers were investigated by X-ray phase analysis, electron and atomic force microscopy. The thickness of platinu...
Mathematical Modeling of Scattering of Electromagnetic Waves on Plane Two-Periodic Structures
Bulletin of the National Technical University "KhPI". Series: Mathematical modeling in engineering and technologies
One of the scientific hypotheses for the creation of nonreciprocal optical metasurfaces is based on the use of a wave channel in which rays of the direct and reverse diffraction scenarios are realized on two-periodic flat structures with nonlinear elements. To test this hypothesis, it is necessary to carry out mathematical modeling of the process of scattering of electromagnetic waves by metasurfaces under conditions of excitation of several diffraction orders. It is known that among two-periodic flat lattices of different structures there are five types that fill the plane. These are the Bravais lattices. The problem of scattering of an incident monochromatic TE polarized wave on a metal screen with recesses in two-periodic structures filled with silicon was considered. In this paper, mathematical models are constructed for studying the spatial amplitude spectra of metasurfaces on Bravais lattices and some results of their numerical study are presented. Relationships are obtained f...
Calculation of the Magnetic Fields of the Electric Power Line
The task of calculation of per unit length parameters of multi-conductor electrical overhead transmission lines has been treated in the paper. The calculation of distribution of electric and magnetic fields has been performed by means of the finite volume method for entire span of the line. The theoretical justification of the method for calculation the parameters of electromagnetic field taking into account the change of the vector of magnetic potential along the line has been given. The problems of electrostatic and magnetostatic for a single electric conductor and unlimited long conductor with current have been solved. For the inner and total inductivities of a single conductor under the current have been obtained relationships and drawn dependences. Dependence between the speeds of light and of electromagnetic wave's propagation has been presented. Based on the characteristics of distribution of electric and magnetic fields of multi-conductor lines has been provided the method of calculation of the matrix of own and mutual capacitances and inductivities the calculated values of per unit length parameters of compact 110 kV electric line which is in concordance with one of basic physical constant – the speed of light. Keywords: multi-conductor overhead line, magnetic field, matrix of per unit length parameters. Calculul câmpurilor magnitice a liniilor electrice Pațiuc V., Berzan V., Rîbacova G. Institutul de Energetică al Academiei de Ştiinţe a Moldovei Chișinău, Republica Moldova Rezumat. În lucrare se examinează problema de calcul a parametrilor lineică a liniilor electrice cu multe conductore. Calculul are la bază determinarea distribuției câmpurilor electrice și magnetice, care se face prin utilizarea metodei volumelor finite pentru deschiderea liniеi. Se prezintă baza teoretică a metodei de calcul a câmpului electromagnetic al liniei, ținând cont de evoluția valorii vectorului potențialului magnetic în linie. S-au soluționat probleme pentru repartiției câmpului electrostatic staționar și a câmpului magnetic al unui conductor infinit. S-au obținut relațiile de calcul pentru componentele inductanței conductorului (internă, externă, inductanța totală) a conductorului. S-a obținut caracteristica de evoluție a vitezei de propagare a câmpului electromagnetic în raport cu viteza luminii în linia electrică în funcție de coraportul parametrilor geometriei spațiului în care se propagă. Pe baza caracteristicilor distribuției câmpurilor electrice și magnetice ale liniei cu multe conductoare s-a propus metoda de calcul a matricelor parametrilor capacitivi și inductivi proprii și mutuli ai liniei compacte cu tensiune de 110 kV, a căror valori sunt în concordanță cu una dintre constantele de bază ale fizicei, deci cu viteza luminii. Cuvinte cheie: linie electrică cu multe conductoare, câmp magnetic, matricea parametrilor linieică. Расчет магнитных полей линии электропередачи Пацюк В.И., Берзан В.П., Рыбакова Г. Институт энергетики Академии наук Молдовы Кишинев, Республика Молдова Аннотация. В работе рассмотрена задача расчета погонных параметров многопроводных линий электропередач. Расчет распределения электрического и магнитного поля выполнен методом конечных объемов для всего пролета линии. Дано теоретическое обоснование метода расчета параметров электромагнитного поля с учетом изменения векторного магнитного потенциала вдоль линии. Решены задачи электростатики и магнитостатики для отдельного проводника и бесконечно длинного проводника с током. Получены соотношения и построены зависимости внутренней и полной индуктивности для одинокого проводника. Представлена зависимость между скоростью распространения электромагнитной волны в линии электропередачи и скоростью света. На основе характеристик распределения электрического и магнитных полей многопроводных линий приведена методика расчета матриц их собственных и взаимных емкостей и индуктивностей расчетные значения погонных параметров компактной линии с напряжением 110 кВ, которые согласуются с одной из базовых физических констант – скоростью света. Ключевые слова: многопроводная линия электропередачи, магнитное поле, матрица погонных параметров.
Modified direct method in static problems of axi-symmetric non-thin plates
Strength of Materials and Theory of Structures
The initial equations for solving the axisymmetric problem are given and consideredboundary conditions on the end surfaces and average section of the design element. As a result, we get a system of partial differential equations that can be solved by the numerical-analytical (modified) method of straight lines. The transformation of the reduced equations of equilibrium in parts, as well as the reduced models of the boundary conditions of the end surfaces and the average section, are shown. As a result, a boundary value problem for the system of reduced differential equations in ordinary derivatives written in the Cauchy form with boundary conditions of the general form is obtained. The thermal conductivity of the cylindrical wall was calculated, the results were compared with analytical calculations and results of other authors, which confirms the reliability of the developed methodology. A computer simulation of the stress-strain state of a cylindrical structural element due to the...
Bulletin of the National Technical University «KhPI» Series: Dynamics and Strength of Machines, 2019
У статті поставлено проблему зв'язаного аналізу розподілу електромагнітного та теплового поля, а також напруженодеформованого стану електропровідного тіла. Наведено відповідні функціонали, стаціонарність яких забезпечує знаходження розв'язку. Надані у загальному вигляді системи визначальних рівнянь. Ключові слова: напружено-деформований стан, варіаційна постановка задачі, метод скінчених елементів, електромагнітне поле, теплове поле, електромагнітні сили. Х. АЛЬТЕНБАХ, К. НАУМЕНКО, Д. ЛАВИНСКИЙ, В. КОНКИН ВАРИАЦИОННАЯ ПОСТАНОВКА ЗАДАЧ ТЕРМОДЕФОРМИРОВАНИЯ ЭЛЕКТРОПРОВОДНЫХ ТЕЛ В ЭЛЕКТРОМАГНИТНОМ ПОЛЕ В статье поставлена проблема связанного анализа распределения электромагнитного и теплового поля, а также напряженнодеформированного состояния электропроводного тела. Приведены соответствующие функционалы, стационарность которых обеспечивает нахождение решения. Представлены в общем виде системы разрешающих уравнений. Ключевые слова: напряженно-деформированное состояние, вариационная постановка задачи, метод конечных элементов, электромагнитное поле, тепловое поле, электромагнитные силы.