Design and analysis of water quality monitoring and filtration system for different types of water in Malaysia (original) (raw)

Real Time Water Quality Monitoring and Management System

IRJET, 2022

Water pollution has been an increasing problem over the decade. The conventional method of testing water quality is to assemble samples of water physically and send them to the lab to test and analyze. This paper proposes a Real Time Water Quality Monitoring & Management system; which will allow water quality monitoring at household levels as well as help in limiting the use of this natural resource. The objective of the proposed water quality monitoring system based on the technology of internet of things (IoT), is to observe the nature and quality of the tap water i.e., how the pH content & total dissolved solids (TDS) content varies and to provide a user-friendly interface with infographics and meters to illustrate the quality factors. For development of this system, the developers will be using an Uno R3 ATmega328p Arduino Development Board and sensors for finding pH value, TDS content & flow rate of the tap water and a GSM module for message technique.

Real Time Water Quality Monitoring and Control System

International Journal for Research in Applied Science and Engineering Technology, 2017

Water quality monitoring is a method used to check the water parameters to indentify the trends of change, pollution levels and thus helps to decide and implement the pollution control systems. Water quality monitoring and control of swimming pools, ponds and other manmade water bodies are important to safeguard public health and is thus in the general interest of the environment and society. Conventional methods involve time consuming and laborious methods of sample collection, testing and data recording. This paper mainly focuses on the development of a system which comprise of online connectivity for collection of data from water body for monitoring and control. Programmable Logic Controller PLC is used to make the system automatic along with Arduino and Bluetooth module to collect data on mobile phone. Several sensors are used to measure water parameters for checking overall water balance. The prototype checks and tests alkalinity of water, Ph level , water temperature etc. Drinking water treatment could be the future scope of this project. Also the waste water treatment could be an application of this project.

Development and Testing of Real Time Water Quality Monitoring System for Lakes

International journal of engineering research and technology, 2019

Water pollution is one of the biggest fears for the greenglobalization". At present, water parameters are identified by chemical analysis or laboratory test, where the testing equipment is stationary and samples are provided to testing equipment. Thus the current water quality monitoring system is a manual system with tedious process and is very time consuming. In order to increase the frequency, the testing equipment can be placed in the river water and detection of pollution can be made remotely. This paper intends a wireless sensor-based Water Quality Monitoring System. Data collected by the base station is sent to the remote monitoring station. Data collected at the remote site can be displayed in visual format on PC with the help of MATLAB and is also compared with standard values. If the obtained value is above the verge value automated warning SMS alert will be sent to the agent. The proposed paper is to obtain the water monitoring system with high frequency, high mobility, and low powered. This kind of execution is suitable for large scale deployments, which enable the sensor network to provide data to the water authorities.

Design and Implementation of a Low-Cost Portable Water Quality Monitoring System

Computers, materials & continua, 2021

Water is one of the needs with remarkable significance to man and other living things. Water quality management is a concept based on the continuous monitoring of water quality. The monitoring scheme aims to accumulate data to make decisions on water resource descriptions, identify real and emergent issues involving water pollution, formulate priorities, and plan for water quality management. The regularly considered parameters when conducting water quality monitoring are turbidity, pH, temperature, conductivity, dissolved oxygen, chemical oxygen demand, biochemical oxygen demand, ammonia, and metal ions. The usual method employed in capturing these water parameters is the manual collection and sending of samples to a laboratory for detection and analysis. However, this method is impractical in the long run because it is laborious and consumes a considerable amount of human resources. Sensors integrated into a mobile phone application interface can address this issue. This paper aims to design and implement an Internet of Things-based system comprising pH, temperature, and turbidity sensors, which are all integrated into a mobile phone application interface for a water monitoring system. This project utilizes the Bluetooth Standard (IEEE 802.15.1) for communication/transfer of data, while the water quality monitoring system relies on the pH, turbidity, and temperature of the test water.

IJERT-Development and Testing of Real Time Water Quality Monitoring System for Lakes

International Journal of Engineering Research and Technology (IJERT), 2019

https://www.ijert.org/Development-and-Testing-of-Real-Time-Water-Quality-Monitoring-System-for-Lakes https://www.ijert.org/research/Development-and-Testing-of-Real-Time-Water-Quality-Monitoring-System-for-Lakes-IJERTCONV7IS08028.pdf "Water pollution is one of the biggest fears for the greenglobalization". At present, water parameters are identified by chemical analysis or laboratory test, where the testing equipment is stationary and samples are provided to testing equipment. Thus the current water quality monitoring system is a manual system with tedious process and is very time consuming. In order to increase the frequency, the testing equipment can be placed in the river water and detection of pollution can be made remotely. This paper intends a wireless sensor-based Water Quality Monitoring System. Data collected by the base station is sent to the remote monitoring station. Data collected at the remote site can be displayed in visual format on PC with the help of MATLAB and is also compared with standard values. If the obtained value is above the verge value automated warning SMS alert will be sent to the agent. The proposed paper is to obtain the water monitoring system with high frequency, high mobility, and low powered. This kind of execution is suitable for large scale deployments, which enable the sensor network to provide data to the water authorities.

IJERT-Real-Time Water Quality Monitoring System

International Journal of Engineering Research and Technology (IJERT), 2020

https://www.ijert.org/real-time-water-quality-monitoring-system https://www.ijert.org/research/real-time-water-quality-monitoring-system-IJERTCONV8IS15032.pdf Nowadays water is the is the most valuable for all the human beings drinking water utilities faces challenges in real-time operation. These challenges occurred because of growing population, limited water resources, ageing infrastructure etc. Hence there is a need of better methodologies for monitoring the water quality. To reduce the water relateddiseases and prevent water populationWorld health Organization (WHO) has also stated thiscrisis as "the largest mass poisoning of a population in history".The main goal of this paperto build a Sensor-based Water Quality Monitoring System.

Advanced Water Quality Monitoring Using Microcontroller

This research aims to make an efficient portable device which can be monitoring the quality of water and make aware the consumer or user about the water they are going to drink or use. The contamination in water supply is biggest problem right now in world. Rural area's water supply system is not stronger as compare to urban locality. Rural area population is blindly depended on water filter system because they don't have any testing module under their budget limit. In this, the main water parameters are going to be carried out like TDS, Turbidity, hardness, and conductivity and monitored with help of microcontroller and different sensors. Innovation Challenge to develop 'portable devices' for testing drinking water quality.

Water Quality Monitoring System Literature Survey and Design

International Journal for Research in Applied Science & Engineering Technology (IJRASET), 2024

Given the significant obstacles that water pollution poses to the principles of green globalisation, it is more important than ever to guarantee a reliable and safe source of drinking water. This research presents a practical and affordableapproach to meet this need by proposing a real-time waterquality monitoring system that makes use of the Internet ofThings (IoT). The proposed system effectively incorporates awide range of sensors that are specifically designed to monitor physical and chemical parameters that are critical for assessingthe quality of water.

Smart System-Based Water Quality Measuring Device For Clean Water Availability

atlantis-press, 2020

Ciaruteun Ilir Village, Cibungbulang sub-district is located on the West of Bogor Regency, approximately 6 km from the sub-district capital. The village is experiencing difficulties in obtaining clean water that is suitable for consumption even though the village area has a river but is full of dirt and garbage. Even though the river is dirty, there are some people who are still using it, for example: for a bathe. There are also people who make wells, but the water quality is not guaranteed to be suitable for consumption. As a result, many people are affected by stomach and skin diseases. The monitoring systems that can observe the water quality has become an urgent need for the villagers. The results of the test produce data that is sent to an application that can be opened on the website. Both smartphone and PC can be used to obtain the data. The data then stored in the website's database and can be used to predict the water quality from time to time. Testing method of the working model of these devices and application was done through a process of repeated interaction between researchers and villagers. This technology and application are designed using devices that are connected to an android application or computer so that the users can use them both in real-time and mobile modes to monitor and make decisions about the usage of water for their health.

Design Configuration of Water Quality Monitoring System in Surabaya

Journal of Computer, Electronic, and Telecommunication

Water have been important needs for human life in many sectors such as in industry, agriculture, and household that its quality must be conserved so is in Surabaya city. The quality of water could influence the quality of human life directly, thus it is important to have an integrated water quality monitoring system. Information regarding water quality monitoring such as pH, dissolved oxygen, turbidity, and conductivity were collected to produce a periodic decision for controlling, analyzing, and fixing the condition of the water. This paper proposed a design configuration of water quality monitoring system for tap water in Surabaya. First, a comparison study of water quality monitoring technology in terms of area, parameter, and methodology from the previous researchers is presented. From the study, the design configuration of water quality monitoring system to be implemented in Surabaya is concluded. The data collection method is better to be done by using Internet of Things (IoT)...