Effect of shaped laser beam profiles on melt flow dynamics in conduction mode welding (original) (raw)
Related papers
Influence of Laser Beam Shaping on Melt Pool Thermocapillary Flow
2020
The effect of different shapes of laser beam power density distribution was investigated numerically with respect to the thermo-hydrodynamics of the melt pool during welding. The process addressed is conduction mode bead on plate welding of the Titanium alloy Ti-6Al-4V. A new solver based on the volume of fluid method to track the deformation of the melt free surface was developed in the OpenFOAM software. Experiments were conducted for the purpose of validating the model. In addition to the traditional cross-cut images of the weld bead, top view images of the melt pool were analysed to perform the validation along the 3space dimensions. A good agreement between numerical predictions and experimental measurements was obtained, thus promising a confident utilization of this simulation model when investigating the influence of beam shapes on the resulting weld seam. The effect of three different beam shapes on the melt pool velocity flow, temperature fields, and melt geometry were stu...
Melt pool vorticity in deep penetration laser material welding
Sadhana, 2011
In the present study, the vorticity of melt motion in the keyhole and weld pool has been evaluated in case of high power CO 2 laser beam welding. The circulation of vorticity is obtained as a function of Reynolds number for a given keyhole volume which is linked to Mach number variation. The shear stress and thermal fluxes present in the turbulent pool are linked to diffusivity and Prandtl number variation. It was shown that below a critical value of Rayleigh number, the conduction mode of melt transfer signifying beam absorption becomes dominant. Above this value, convective heat transfer indicates melting and evaporation occurring in the weld pool during laser welding. The evaporative recoil pressure expels the liquid while surface tension and hydrostatic pressure help to retain the melt in the keyhole cavity in this high power laser beam welding. The understanding of several hydrodynamic phenomena occuring in the weld pool is valuable not only for understanding basic mechanistic aspects but also for process optimization involved in laser beam welding.
Revealing the effects of laser beam shaping on melt pool behaviour in conduction-mode laser melting
Journal of Materials Research and Technology, 2023
Laser beam shaping offers remarkable possibilities to control and optimise process stability and tailor material properties and structure in laser-based welding and additive manufacturing. However, little is known about the influence of laser beam shaping on the complex melt-pool behaviour, solidified melt-track bead profile and microstructural grain morphology in laser material processing. A simulation-based approach is utilised in the present work to study the effects of laser beam intensity profile and angle of incidence on the melt-pool behaviour in conduction-mode laser melting of stainless steel 316L plates. The present high-fidelity physicsbased computational model accounts for crucial physical phenomena in laser material processing such as complex laser-matter interaction, solidification and melting, heat and fluid flow dynamics, and free-surface oscillations. Experiments were carried out using different laser beam shapes and the validity of the numerical predictions is demonstrated. The results indicate that for identical processing parameters, reshaping the laser beam leads to notable changes in the thermal and fluid flow fields in the melt pool, affecting the melt-track bead profile and solidification microstructure. The columnar-to-equiaxed transition is discussed for different laser-intensity profiles.
Numerical simulation of melting and solidification in laser welding of mild steel
International Journal of Computational Materials Science and Surface Engineering, 2007
Melting and solidification which is mainly responsible for weld pool geometry in a laser welding process is analysed following two different transient models: (1) without fluid flow, that is, pure conduction and (2) with surface tension driven flow considering various beam power, beam diameter and scanning speed. Based on these models, numerical simulations for laser welding of mild steel has been carried out using commercial software, fluent. By solving the conservation equations of energy, momentum and mass, the temperature distribution, liquid fraction and flow fields has been predicted and the fusion zone and Heat Affected Zone (HAZ) were obtained. Using predicted results, this present study investigates the effects of laser beam power, beam diameter and scanning speed on heat transfer and the weld pool geometry. Analysis shows that the effect of consideration of fluid motion has pronounced effects on the thermal field and weld pool geometry.
Journal of Applied Mechanics and Technical Physics, 2006
A quasi-two-dimensional mathematical model of laser welding of plates made of a binary alloy with allowance for metal vaporization and formation of a vapor channel is developed. A difference algorithm and a computer code are designed on the basis of this model. Processes of melting, vaporization, and solidification of the alloy of butt-welded aluminum plates are considered numerically as an example. The shape and depth of the vapor channel and welding bath are calculated for given conditions of the radiation power and welding velocity. Based on semi-empirical relations and numerical data obtained, the characteristic size of the dendritic structure of the solidified melt is estimated.
Computational Investigation on Molten Pool of Single and Twin Beam Laser Welding
Journal of Solid Mechanics and Materials Engineering, 2007
Laser beam welding using two or twin laser beams has become an emerging welding technique. In addition to the experimental researches, the numerical modeling is helpful to reveal invisible flow phenomena in welding process and provide possible improvements to the welding technique. This paper proposed a two-dimensional thermal-fluid coupled model and the suitable boundary conditions for analyzing the flow behavior of molten pool. Using finite element analysis software MSC.Marc, the flow pattern and shape of molten pool for the single and twin beam welding were systematically investigated. The obtained numerical results could be successfully used to explain the experiment results.
A Review on Melt-Pool Characteristics in Laser Welding of Metals
Advances in Materials Science and Engineering, 2018
Laser welding of metals involves with formation of a melt-pool and subsequent rapid solidification, resulting in alteration of properties and the microstructure of the welded metal. Understanding and predicting relationships between laser welding process parameters, such as laser speed and welding power, and melt-pool characteristics have been the subjects of many studies in literature because this knowledge is critical to controlling and improving laser welding. Recent advances in metal additive manufacturing processes have renewed interest in the melt-pool studies because in many of these processes, part fabrication involves small moving melt-pools. e present work is a critical review of the literature on experimental and modeling studies on laser welding, with the focus being on the influence of process parameters on geometry, thermodynamics, fluid dynamics, microstructure, and porosity characteristics of the melt-pool. ese data may inform future experimental laser welding studies and may be used for verification and validation of results obtained in future melt-pool modeling studies.
DESIGN MATHEMATICAL MODEL FOR HEAT TRANSFER IN LASER BEAM WELDING PROCESS
ARPN Journal of Engineering and Applied Sciences, 2018
The model of energy transport is designed to include the fusion effects by using a moving boundary problem. This model allows accounting for both high order temperature gradients and state of non-equilibrium, this prompts further realistic determination the distribution of temperature within the work-piece. The model has been employed to simulate the evolution of spatial temperature distribution within the target materials when irradiated with both CW and pulsed laser. This model explains the welding process in terms of the velocity of fusion surface (V *) which has been calculated as a function of power intensity. The zone of fusion dimensions, and the heat affected zone are illustrated of target metal with phase transformation under the incident power intensity in a range of 10 5 W/cm 2. A new scheme of welding mechanism has been implemented. This scheme is based on switching from the transient model of welding to continuous welding (steady state), using a lagging method in explicit technique. This method gives more stable solution through a computer program, which calculates the temperature distribution from a moving work-piece.
A study of laser welding modes with varying beam energy levels
The energy of a laser beam is generally calculated based on the laser power and its processing speed. In this work, the laser welding modes such as conduction, conductionpenetration, and keyhole welding of thickness 1.6, 2, and 2.5 mm AISI304 stainless steel sheets, respectively, are studied at different beam energy levels. A series of bead-on-plate trials are conducted using a 500 W continuous wave Nd:YAG laser source to study the beam-material interaction and the influence of laser power and welding speed on the formation of weld pool. In addition to the experimental study, a three-dimensional finite-element model is developed to analyse the transient heat flow and to predict the formation of the weld pool. The correlation among the parameters including laser power, welding speed, beam incident angle, and the characteristic geometry of weld pool are established. Temperature-dependent thermal properties of AISI304 stainless steel, the effect of latent heat of fusion, and the convective and radiative aspects of boundary conditions are considered in the model. The heat input to the developed model is assumed to be a three-dimensional conical Gaussian heat source. Finite-element simulations are carried out by using finite-element code, SYSWELD, and FORTRAN subroutines available within the code are used to obtain the numerical results. The result of the numerical analysis provides the shape of the molten pool with different beam energy levels, which is then compared with the results obtained through experimentation. It is observed that the results obtained from finite-element simulation and the experimental trials are in good agreement.
The Effect of Groove Shape on Molten Metal Flow Behaviour in Gas Metal Arc Welding
Materials, 2021
One of the challenges for development, qualification and optimisation of arc welding processes lies in characterising the complex melt-pool behaviour which exhibits highly non-linear responses to variations of process parameters. The present work presents a computational model to describe the melt-pool behaviour in root-pass gas metal arc welding (GMAW). Three-dimensional numerical simulations have been performed using an enhanced physics-based computational model to unravel the effect of groove shape on complex unsteady heat and fluid flow in GMAW. The influence of surface deformations on the magnitude and distribution of the heat input and the forces applied to the molten material were taken into account. Utilising this model, the complex thermal and fluid flow fields in melt pools were visualised and described for different groove shapes. Additionally, experiments were performed to validate the numerical predictions and the robustness of the present computational model is demonstrated. The model can be used to explore the physical effects of governing fluid flow and melt-pool stability during gas metal arc root welding. View Full-Text