Antibacterial activity of silver and titania nanoparticles on glass surfaces (original) (raw)
Related papers
Titania and silver–titania composite films on glass—potent antimicrobial coatings
Journal of Materials Chemistry, 2007
Titania (anatase) and Ag-doped titania (anatase) coatings were prepared on glass microscope slides by a sol-gel dip-coating method. The resultant coatings were characterised by X-ray diffraction, X-ray absorption near edge structure (XANES), Raman, scanning electron microscopy (SEM), wavelength dispersive X-ray (WDX) analysis, X-ray photoelectron spectroscopy (XPS) and UV-vis techniques and shown to consist of anatase with ca. 0.2-1 atom% Ag 2 O. Photocatalytic activity of the coatings was determined by photomineralisation of stearic acid, monitored by FT-IR spectroscopy. Photocatalytically-active coatings were screened for their antibacterial efficacy against Staphylococcus aureus (NCTC 6571), Escherichia coli (NCTC 10418) and Bacillus cereus (CH70-2). Ag-doped titania coatings were found to be significantly more photocatalytically and antimicrobially active than a titania coating. No antimicrobial activity was observed in the dark-indicating that silver ion diffusion was not the mechanism for antimicrobial action. The mode of action was explained in terms of a charge separation model. The coatings also demonstrated significantly higher activity against the Gram-positive organisms than against the Gram-negative. The Ag 2 O-TiO 2 coating is a potentially useful coating for hard surfaces in a hospital environment due to its robustness, stability to cleaning and reuse, and its excellent antimicrobial response.
Antibacterial Activity of Silver and Gold Particles Formed on Titania Thin Films
Nanomaterials
Metal-based nanoparticles with antimicrobial activity are gaining a lot of attention in recent years due to the increased antibiotics resistance. The development and the pathogenesis of oral diseases are usually associated with the formation of bacteria biofilms on the surfaces; therefore, it is crucial to investigate the materials and their properties that would reduce bacterial attachment and biofilm formation. This work provides a systematic investigation of the physical-chemical properties and the antibacterial activity of TiO2 thin films decorated by Ag and Au nanoparticles (NP) against Veillonella parvula and Neisseria sicca species associated with oral diseases. TiO2 thin films were formed using reactive magnetron sputtering by obtaining as-deposited amorphous and crystalline TiO2 thin films after annealing. Au and Ag NP were formed using a two-step process: magnetron sputtering of thin metal films and solid-state dewetting. The surface properties and crystallographic nature ...
2015
The work describes titania coatings containing various forms of silver applied on a titanium substrate by a dip-coating sol-gel technique. Silver was added into the basic titania sol in form of colloid particles of Ag, crystals of AgNO3, particles of AgI, particles of Ag3PO4 and Ag3PO4 developed in situ (in the sol) by reaction of AgNO3 with added calcium phosphate (brushite or monetite). Mechanically and chemically treated titanium substrates were dipped at a constant rate into individual types of sols. Subsequently, they were slowly fired. The fired coatings contained microcracks. All over the surface there were evenly distributed spherical nanoparticles of silver (Ag, AgNO3) or microcrystals of AgI and Ag3PO4. The prepared coatings were tested under static conditions for their bactericidal effects against gram-negative bacteria Escherichia coli (E. coli). The coated substrates were immersed into a suspension of E. coli in physiological solution for 24 and 4 hours. The basic titan...
Applied Surface Science, 2011
Controlled photodeposition of silver nanoparticles (AgNP) on titania coatings using two different sources of UV light is described. Titania (anatase) thin films were prepared by the sol-gel dip-coating method on silicon wafers. AgNPs were grown on the titania surface as a result of UV illumination of titania films immersed in aqueous solutions of silver nitrate. UV xenon lamp or excimer laser, both operating at the wavelength 351 ± 5 nm, was used as illumination sources. The AFM topography of AgNP/TiO 2 nanocomposites revealed that silver nanoparticles could be synthesized by both sources of illumination, however the photocatalysis carried out by UV light from xenon lamp illumination leads to larger AgNP than those synthesized using the laser beam. It was found that the increasing concentration of silver ions in the initial solution increases the number of Ag nanoparticles on the titania surface, while longer time of irradiation results the growth of larger size nanoparticles. Antibacterial tests performed on TiO 2 covered by Ag nanoparticles revealed that increasing density of nanoparticles enhances the inhibition of bacterial growth. It was also found that antibacterial activity drops by only 10-15% after 6 cycles compared to the initial use.
Antibacterial Properties of Silver-Doped Titania
Small, 2007
Silver has been known to exhibit strong cytotoxicity towards a broad range of micro-organisms. Silver composites with a tailored slow silver-release rate are currently being investigated for various applications. Silver has an oligodynamic effect, that is, silver ions are capable of causing a bacteriostatic (growth inhibition) or even a bactericidal (antibacterial) impact. Nanometer-sized inorganic particles and composites display unique physical and chemical properties and represent a unique class of materials in the development of novel devices, which can be used in numerous physical, biological, biomedical, and pharmaceutical applications. Silver composites have applications in many industries, such as aerospace, surface coatings (e.g., in refrigerators, food processing, kitchen furniture), and for use in hospitals. Research indicates that silver is also effective in purification systems for disinfecting water or air. [4] However, in order to make the use of silver economical, there is a need to find cheaper ways of using silver in potential applications without jeopardizing its functionalities.
Role of silver nanoparticles in imparting antimicrobial activity of titanium dioxide
Materials Letters, 2016
In the present work, facile syntheses for titanium dioxide (TiO 2), Silver (Ag), and Ag/TiO 2 nanoparticles were applied through sol-gel technique. Structural and morphological characterizations were followed by UV, TEM, and SAED. The cup agar diffusion method was followed to investigate the bactericidal activities against three common bacterial strains being Escherichia coli (Gram-negative), Bacillus subtitles and Staphylococcus aureus (Gram positive). The bactericidal activities were evidenced by the inhibition zones of the bacterial growth around the resultant substrates. The results prove promising bactericidal activity of Ag and Ag/TiO 2 nanophases compared to TiO 2 anatase phase nanoparticles possessing no bactericidal activity. The combined presence of silver nanoparticles along with the anatase phase induced a promising bactericidal activity.
Nanotoxicology, 2011
Silver nanoparticles (Ag-nps) are used as a natural biocide to prevent undesired bacterial growth in clothing and cosmetics. The objective of this study was to assess the antibacterial efficacy of Ag-nps of different sizes, surface conditions, and synthesis methods against Escherichia coli, Ag-resistant E. coli, Staphylococcus aureus, methicillin-resistant S. aureus (MRSA), and Salmonella sp. Ag-nps samples were synthesized by: Base reduction with unmodified surfaces and used as synthesized ('unwashed'; 20, 50 and 80 nm) or after 20 phosphate buffer washes ('washed'; 20, 50 and 80 nm), or synthesized by laser ablation with carbon-stabilized surfaces ('carbon-coated'; 25 and 35 nm). Unwashed Ag-nps were toxic to all bacterial strains at concentrations between 3.0-8.0 mg/ml. The washed Ag-nps and carbon-coated Ag-nps were toxic to all bacterial strains except Ag-resistant E. coli at concentrations between 64.0-1024.0 mg/ml. Ag-resistant E. coli died only when treated with unwashed Ag-nps or its supernatant, both of which contained formaldehyde.
Journal of Nanomaterials, 2013
Hard, nonporous environmental surfaces in daily life are now receiving due recognition for their role in reducing the spread of several nosocomial infections. In this work, we established the photokilling effects of 1% silver-doped titanium dioxide TiO2. The nanoparticles synthesized by liquid impregnation method were characterized using X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), and scanning electron microscopy (SEM). The Ag-TiO2nanoparticle coatings that have been applied on glass and venetian blind surfaces were effective in generating a loss of viability of two bacteria (Pseudomonas aeruginosaandBacillus subtilis) after two hours of illumination under normal light in the visible spectrum. Such surfaces can be applicable to medical and other facilities where the potential for infection should be controlled.
Antimicrobial characterization of silver nanoparticle-coated surfaces by "touch test" method
Nanotechnology, science and applications, 2017
Bacterial infections, especially by antimicrobial resistant (AMR) bacteria, are an increasing problem worldwide. AMR is especially a problem with health care-associated infections due to bacteria in hospital environments being easily transferred from patient to patient and from patient to environment, and thus, solutions to prevent bacterial transmission are needed. Hand washing is an effective tool for preventing bacterial infections, but other approaches such as nanoparticle-coated surfaces are also needed. In the current study, direct and indirect liquid flame spray (LFS) method was used to produce silver nanoparticle-coated surfaces. The antimicrobial properties of these nanoparticle surfaces were evaluated with the "touch test" method against Escherichia coli and Staphylococcus aureus. It was shown in this study that in glass samples one silver nanoparticle-coating cycle can inhibit E. coli growth, whereas at least two coating cycles were needed to inhibit S. aureus g...
Colloids and Surfaces B: Biointerfaces, 2018
Silver nanoparticles (nanoAg) are effective antimicrobials and promising alternatives to traditional antibiotics. This study aimed at evaluating potency of different nanoAg against healthcare infections associated bacteria: Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus. A library of differently coated nanoAg of two different sizes (10 and 50 nm) were prepared using coating agents poly-L-Lysine (PLL), cetyltrimethyl-ammonium bromide (CTAB), citrate (CIT), polyvinyl-pyrrolidone (PVP), polysorbate 80 (Tween 80), and dioctylsodium sulfosuccinate (AOT). Stability evaluation by means of agglomeration and dissolution behaviour was performed for all nanoAg under conditions relevant for this study. Antibacterial properties of nanoAg were addressed by determining their minimal bactericidal concentrations (MBC) in deionised (DI) water to minimise the influence of silver speciation on its bioavailability. In parallel, AgNO 3 was analysed as an ionic control. Studied nanoAg were efficient antimicrobials being remarkably more potent towards E. coli than to S. aureus (4 h MBC values for different nanoAg ranged from 0.08 to 5.0 mg Ag/L and 1.0-10 mg Ag/L, respectively). The toxicity of all nanoAg to S. aureus (but not to E. coli) increased with exposure time (4 h vs 24 h). 10 nm sized nanoAg released more Ag-ions and were more toxic than 50 nm nanoAg. Coating-dependent toxicity was more prominent for 50 nm nanoAg coated with Tween 80 or CTAB rendering the least toxic nanoAg. Obtained results showed that the antimicrobial effects of nanoAg were driven by shed Ag-ions, depended on target bacteria, exposure time and were the interplay of NP size, solubility and surface coating.