The Method of Artificial Organs Fabrication Based on Reverse Engineering in Medicine (original) (raw)
Related papers
Possibilities of preoperative medical models made by 3D printing or additive manufacturing
Most of the 3D printing applications of preoperative models have been focused in dental and cranio-maxillofacial area. Purpose of this paper is to demonstrate the possibilities in other application area and give examples what are currently possibilities. The approach was to communicate with the surgeons with different fields about their needs related preoperative models and try to produce preoperative models that satisfy those needs. Ten different kind of examples of possibilities were selected to shown in this paper and aspects related imaging, 3D model reconstruction, 3D modeling and 3D printing were presented. Examples were heart, ankle, backbone, knee and pelvis with different processes and materials. Software required were Osirix, 3Data Expert and Rhinoceros. Different 3D printing processes were binder jetting and material extrusion. This paper present a wide range of possibilities related to 3D printing of preoperative models. Surgeons should be aware of the new possibilities and in the most cases help from mechanical engineering side is needed.
International Journal on Integrating Technology in Education, 2018
The Phantoscar project is a human body simulator recreated in a three-dimensional physical platform, with realistic position of organs and systems, obtained by means of 3D printing, to perform simulations by catheterization or laparoscopy in its specific spatial location within the human body and thus to realize different types of customized surgical simulations. It is the result of coordinated work between designers, engineers and health specialists, based on the use of additive manufacturing technologies, medical image segmentation and polygonal mesh editing (MESH), development of molds and reproductions with synthetic materials and similar properties to the tissues of the human body.
Journal of Surgical Education, 2020
It is feasible to generate and print a low cost upper urinary tract model from patient data imagery using environmentally friendly products that can be used effectively in surgical training. The simulator has been able to reproduce sensations related to surgical movements for a low cost. Hereafter, research into the pedagogical benefits provided to students, and through them, patients, should be performed. 3D printing models can offer new opportunities for healthcare simulation specific to different surgical fields. (J Surg Ed 000:1À13.
Manufacturing of Patient specific AM medical models for Complex Surgeries
Additive Manufacturing (AM) is growing rapidly day by day. In AM sector, medical is one of the fastest growing industry. In the initial days the patient anatomy was analyzed using X-rays where only the 2-Dimensional (2D) representation is made. Later the improvements resulted in the 3D image acquisition with the help of Computed Tomography (CT) scanners, where the data is stored in Digital imaging and communication in medicine (DICOM) images. These DICOM images were used as the source for medical software's to from 3D CAD data. This 3D data is used for virtual simulation and for planning in case of some surgeries. The latest advancement in this is the creation of patient specific physical models. These models contain almost exact replication of the patient anatomy. The surgeon can pre plan the surgery in advance and explore important information before operating the patient's body. In the current work the procedure, advantages and limitations of the medical models along with the case study were discussed.
Research on the Realization of Anatomical Models by Additive Technologies
International Journal of Modeling and Optimization, 2018
The paper presents experimental research on the realization of anatomical models using additive technologies using PLA (polylactic acid) material. Prototypes of human internal organs, cerebellum, brainstem, heart, maxillary dental arcade have been obtained, highlighting the advantages and benefits of RP technologies in medicine, especially in surgery and orthopedics by improving communication between doctors and patients, the latter understanding better diagnosis and surgical treatments using physical models printed through 3D technologies or for preparing surgical procedures.
BioMed Research International
Three-dimensional printing (3DP) has recently gained importance in the medical industry, especially in surgical specialties. It uses different techniques and materials based on patients’ needs, which allows bioprofessionals to design and develop unique pieces using medical imaging provided by computed tomography (CT) and magnetic resonance imaging (MRI). Therefore, the Department of Biology and Medicine and the Department of Physics and Engineering, at the Bioastronautics and Space Mechatronics Research Group, have managed and supervised an international cooperation study, in order to present a general review of the innovative surgical applications, focused on anatomical systems, such as the nervous and craniofacial system, cardiovascular system, digestive system, genitourinary system, and musculoskeletal system. Finally, the integration with augmented, mixed, virtual reality is analyzed to show the advantages of personalized treatments, taking into account the improvements for preo...
Personalized development of human organs using 3D printing technology
3D printing is a technique of fabricating physical models from a 3D volumetric digital image. The image is sliced and printed using a specific material into thin layers, and successive layering of the material produces a 3D model. It has already been used for printing surgical models for preoperative planning and in constructing personalized prostheses for patients. The ultimate goal is to achieve the development of functional human organs and tissues, to overcome limitations of organ transplantation created by the lack of organ donors and lifelong immunosuppression. We hypothesized a precision medicine approach to human organ fabrication using 3D printed technology , in which the digital volumetric data would be collected by imaging of a patient, i.e. CT or MRI images followed by mathematical modeling to create a digital 3D image. Then a suitable biocompatible material, with an optimal resolution for cells seeding and maintenance of cell viability during the printing process, would be printed with a compatible printer type and finally implanted into the patient. Life-saving operations with 3D printed implants were already performed in patients. However, several issues need to be addressed before translational application of 3D printing into clinical medicine. These are vascularization, innervation, and financial cost of 3D printing and safety of biomaterials used for the construct.
The clinical use of 3D printing in surgery
Updates in Surgery, 2018
The use of 3D printing is gaining considerable success in many medical fields including surgery. Here, the technology was introduced for increasing the level of anatomical understanding thanks to the inherent characteristics of 3D printed models: these are highly accurate and customized reproductions, being obtained from own radiological imaging of patients, and are solid graspable objects allowing for free manipulation on part of the user. The resulting tactile feedbacks significantly help the comprehension of anatomical details, especially the spatial relations between structures. In this regard, they proved to be more effective than conventional 2D imaging and 3D virtual models. To date, an increasing number of applications have been successfully tested in many surgical disciplines, extending the range of possible uses to pre-operative planning, counselling with patients, education of students and residents, surgical training, intraoperative navigation and others; in recent years, 3D printing was also employed for creating surgical tools and reproducing anatomical parts to be used, respectively, as templates or guides for specific tasks of the surgery and individualized implantable materials in reconstructive procedures. Future expectations concern on one side the reduction of manufacturing costs and time to further increase the accessibility of 3D printing, while on the other the development of novel techniques and materials suitable for 3D printing of biological structures by which recreating the architecture and functionality of real human organs and tissues.
Design and manufacture of artificial organs made of polymers
MATEC Web of Conferences
New technologies such as 3D printing and reverse engineering are becoming increasingly popular, including in medical applications. The paper presents possible ways to use 3D printing in the area of increasing the level of medical training specialists in their daily clinical practice and in the selection of the appropriate scenario before a real surgical operation. Descriptions of the projects carried out with the surgeons aimed at achieving the aforementioned goals were presented. The presented concepts are relatively new solutions, but their further development may lead to the extension of the field of application of these techniques in medicine, among others in relation to other specialties.
Surgical Planning and Additive Manufacturing of an Anatomical Model: A Case Study of a Spine Surgery
2020
3D scanning technologies have promising solutions for medical needs such as anatomical models, biocompatible implants, and orthotic/prosthetic models. Although virtual presurgical planning offers more precise results, it may not be applied in every hospital because of the high costs. The aim of this study is to assess the accuracy of the suggested low-cost and effective surgical planning method by means of additive manufacturing to increase success rate of each surgery. In this study, a full spine model of a scoliosis patient was acquired and reconstructed in MIMICS software using different filters and parameters. Therefore, a comparison in terms of geometrical errors among each model was performed based on a reference model. Subsequently, patient-specific full spine model was manufactured using a three-dimensional printing method (fused deposition modeling) and utilized before the surgery. 3D surgical model reconstruction parameters such as wrap tool, binomial blur, and curvature flow filters produced high geometrical errors, while mean filter produced the lowest geometrical error. Furthermore, similarity results of the curvature flow and discrete Gaussian filters were close to mean filter. Smooth tool and mean filter produced almost the same volume of the reference model. Consequently, an ideal protocol for surgical planning of a spine surgery is defined with measurable accuracy. Thus, success rate of a spine surgery may be increased especially for the severe cases owing to the more accurate preoperative review: operability.