A dike–groyne algorithm in a terrain-following coordinate ocean model (FVCOM): Development, validation and application (original) (raw)
Related papers
Coastal Modeling System: Mathematical Formulations and Numerical Methods
2014
The Coastal Modeling System (CMS) is an integrated numerical modeling system for simulating nearshore waves, currents, water levels, salinity and sediment transport, and morphology change. The CMS was designed and developed for coastal inlets and navigation applications, including channel performance and sediment exchange between inlets and adjacent beaches. The present report provides an updated description of the mathematical formulations and numerical methods of hydrodynamic, salinity and sediment transport, and morphology change model CMS-Flow. The CMS-Flow uses the Finite Volume Method on Cartesian grids and has both fully explicit and fully implicit time-stepping schemes. A detailed description of the explicit time-stepping scheme was provided in Militello et al. and . The present report focuses on the recent changes in the mathematical formulations and the implicit time-stepping schemes. The CMS-Wave and CMS-Flow models are tightly coupled within a single inline code. The CMS-Wave and CMS-Flow grids may be the same or have different spatial extents and resolutions. The hydrodynamic model includes physical processes such as advection, turbulent mixing, combined wave-current bottom friction; wave mass flux; wind, atmospheric pressure, wave, river, and tidal forcing; Coriolis force; and the influence of coastal structures. The implicit hydrodynamic model is coupled to a nonequilibrium transport model of multiple-sized total-load sediments. The model includes physical processes such as hiding and exposure, bed sorting and gradation, bed slope effects, nonerodible surfaces, and avalanching.
Hydrodynamics around coastal structures
2002
The numerical model MECCA (Model for Estuarine and Coastal Circulation Assessment) – which was developed to simulate tidal currents, density currents or those generated by wind action, in bays or coastal zones (Hess, 1989) – is a “three-dimensional model”, or a quasi-3D model, which is able to satisfactorily simulate complex three-dimensional flows. The MECCA model algorithm is based on the continuity equation (under the non-compressibility hypothesis), on the Navier-Stokes equations (considering hydrostatic equilibrium and the Boussinesq hypothesis) and on conservation equations for temperature and salinity. It is structured in two modes: the external-mode, obtained by vertical integration of the Navier-Stokes equations, and the internal-mode, obtained by subtracting the equations for the external-mode velocity from the equations for the total velocity. The flow within the bottom boundary layer is alternatively described by a Prandtl type model or by a lDV model of the K-L type. We...
2014
It is now becoming important to develop our capabilities to simulate coastal ocean flows involved with distinct physical phenomena occurring at a vast range of spatial and temporal scales. This paper presents a hybrid modeling system for such simulation. The system consists of a fully three dimensional (3D) fluid dynamics model and a geophysical fluid dynamics model, which couple with each other in two-way and march in time simultaneously. Particularly, in the hybrid system, the solver for incompressible flow on overset meshes (SIFOM) resolves fully 3D small-scale local flow phenomena, while the unstructured grid finite volume coastal ocean model (FVCOM) captures largescale background flows. The integration of the two models are realized via domain decomposition implemented with an overset grid method. Numerical experiments on performance of the system in resolving flow patterns and solution convergence rate show that the SIFOM-FVCOM system works as intended, and its solutions compare reasonably with data obtained with measurements and other computational approaches. Its unparalleled capabilities to predict multiphysics and multiscale phenomena with highfidelity are demonstrated by three typical applications that are beyond the reach of other currently existing models. It is anticipated that the SIFOM-FVCOM system will serve as a new platform to study many emerging coastal ocean problems. 549 in these examples play pivotal roles in our daily life, environments, resources for energy, etc. For example, the oil spill in the Gulf of Mexico has become the largest environmental disaster in US history, and it will have a profound impact on ecological as well as economic systems . Here and hereafter, the scales refer to observation scales such as characteristic length and time, or, process scales such as those in data analysis.
Refined flow modelling in coastal areas
WIT Transactions on the Built Environment, 1970
Problems raised by the computation of tidal flows in coastal areas are reviewed. The main factors which are occasionally overlooked are the tidegenerating force and the mean sea level. The effect of some numerical parameters, including parameter estimation of bottom friction are also discussed.
Finite Element-Based Coastal Ocean Modeling: Today and Tomorrow
The continued necessity of military special forces operations in riverine and coastal environments along with increasing civilian concerns related to sediment transport, search and rescue, pollutant dispersal, and coastal restoration, have resulted in the need for detailed knowledge of currents and water levels in coastal, estuarine, and riverine environments. This demand for information at highly resolved spatial and temporal scales and the availability of massively parallel computer resources has brought to the forefront the capabilities of finite element (FE)-based coastal ocean circulation models. The use by these models of unstructured triangular meshes permits a large degree of flexibility in representing the complexities of coastal environments associated with convoluted shorelines, and steep gradients in currents or bathymetry. Ultimately this flexibility results in model predictions over periods of hours or less at spatial scales that range from meters to kilometers. Unstru...
Application of a coastal modelling code in fluvial environments
Environmental Modelling & Software, 2011
XBeach is an open source, freely available two-dimensional code, developed to solve hydrodynamic and morphological processes in the coastal environment. In this paper the code is applied to ten different test cases specific to hydraulic problems encountered in the fluvial environment, with the purpose of proving the capability of XBeach in rivers. Results show that the performance of XBeach is acceptable, comparing well to other commercially available codes specifically developed for fluvial modelling. Some advantages and deficiencies of the codes are identified and recommendations for adaptation into the fluvial environment are made.
Developments in terrain-following ocean models: intercomparisons of numerical aspects
Ocean Modelling, 2002
During the course of developing new numerical algorithms for a terrain-following ocean modeling system (TOMS), different numerical aspects have been evaluated through a comparison between two widely used community ocean models, the Princeton ocean model (POM) and the regional ocean modeling system (ROMS). While both models aim at modeling coastal to basin-scale problems using similar grids, their numerical algorithms, code structure, and parameterization options are very different. Sensitivity studies with an idealized channel flow and a steep seamount configuration demonstrate how different algorithms in the two models may affect numerical errors, the stability of the code and the computational efficiency. For example, new pressure gradient schemes using polynomial fits and new time stepping algorithms may reduce numerical errors and allow using longer time steps than standard schemes do. However, the new schemes may require more careful choices of time steps and the use of higher order advection schemes to maintain numerical stability.
Genesis-A Generalized Shoreline Change Numerical Model
Journal of Coastal Research, 2012
This r~port describes a numerical model called GENESIS (GENEralized model for SImulating Sh~rehne change): developed for calc~.J.1ating shoreline change as caused primarily by wave actIo~. The model IS based on the o~e-hne theory, for which it is assumed that the beach profile remal~s unc~a~ged, thereby allowing beach change to be described uniquely in terms of the shor.ehn~posItion. As opposed to previous models based on the same concept, GENESIS is gen-era~lzed In .the s.ense. that~simple user i.nterface allows the system to be applied to a diversẽ ar~ety of situations Involving almost arbitrary numbers, locations, and combinations of groins, Jetties, detache~breakwat~rs, seawal.1s, an~beach fills. Other features included in the system are wave sho~hng, refraction, and~lffractIon; sand passing through and around groins, and sources a~d slnk.s of sand. An overview of the modeling system is presented, and comparisons o. analytic solutions as well as prototype situations are presented to demonstrate the capabilIties of the system.