Occupational Health and Safety Management: The Use of Personal Protective Equipment (Ppe) by Artisans in The Local Automotive Industry in Volta Region, Ghana (original) (raw)
Related papers
International Journal of Occupational Safety and Health
Introduction: The job of an automobile mechanic is associated with hazards, illness, and injuries, which may result in sickness, absenteeism, economic loss, disability, or even death. This study assessed the level of knowledge and workplace safety practice by automobile mechanics. Methods: A descriptive cross-sectional study was carried out among 120 registered automobile mechanics in Surulere Local Government Area of Lagos State, Nigeria. A questionnaire was used to obtain information on socio-demography and occupational health practices. Data entry and analysis were done with Epi-info 3.5.1(2008). Chi-square and Fischer Exact tests were used to test for significance. Results: The respondents were all males with a mean age of 39.9±7.5 years, the majority learned the trade through apprenticeship (95.80%) and on full-time work (98.30%). Most respondents (95.8%) were aware of at least one health problem associated with its hazards. Over 75% of respondents were aware of physical hazard...
Environmental Health Insights
Background: Personal protective equipment (PPE) is one of the safeguards to protect workers from occupational risks. The aim of this study was to assess the utilization of PPE and associated factors among large-scale factory workers in Debre Berhan city administration, Ethiopia. Methods: An institutional-based cross-sectional study was conducted using stratified sampling among large-scale factory workers in the Debre Berhan city administration. Four hundred thirty-two employees were interviewed using a stratified sampling technique from 7 large-scale factories. Logistic regression analysis was used to identify factors affecting the utilization of PPE. The strength of association between variables was measured using the odds ratio with 95% confidence intervals at a P-value of .05. Results: A total of 413 respondents were included in the study, with a response rate of 95.6%. Two hundred and eighty-two (68.3%) of the participants were males. The mean age of the respondents was 28.37 ± ...
European Journal of Preventive Medicine
Small-scale enterprises and the informal sector such as mechanical, welding and carpentry workshops constitute the fastest growing economic sectors and represent the most realistic form of employment creation. These occupations are vulnerable and prone to concern themselves with survival rather than improving health and safety and as such health risks remain high in their workplaces. The objectives of this study was to assess the provision of PPEs to employees and level of enforcement of Occupational Health and Safety Act of 2010 with other regulations, guidelines and standard operational procedures in mechanical, welding and carpentry workshops in Mbala District of Northern province in the Republic of Zambia. A descriptive survey of 75 employees from small scale industries or workshops was conducted and data was collected using a questionnaire in line with key ILO thematic areas for workplaces. The results showed that the employees in these workshops were generally not complying with requirements for provision of PPEs with 28% of employees reported not being provided with PPEs. Emergency preparedness and prevention in the workplaces was also poor as none of the employees reported being trained or inducted in first aid management and 0% had first aid kit at their workshop as only 8% were inducted. It was also revealed that employees in Mechanical, Welding and Carpentry workshops in Mbala District of Zambia mostly are not complying with the provisions of the Occupational Health and Safety Act 2010 on general provisions including regulation 22 on provision and use of PPEs leading to dangerous and highly risky workplace environment. It was further revealed that all the employees from workshops interviewed have never been inspected or audited by Factory Inspectors from the Ministry of Labor and Social Services or from any other authorized bodies leading to lack of legal enforcement. The findings of this study can be used to update the health and safety conditions at different workplaces, achieving many socioeconomic benefits for Zambia. Intervention plans like education, awareness, and regular medical checkups should be advocated which help in prevention and minimizing workplace exposures to occupational hazards. The identification and prevention of work-related health costs could result in substantial savings for the national health system, leading to the more sustainable social system. This study provides the baseline for elaborative studies in the future.
International Journal of Research Studies in Management
The work environment of Ghanaian local auto artisans has over the years consisted of various hazards that have dire health and safety implications. This study examined the extent to which the artisans comply with relevant safety regulations as spelt out in the Factories, Offices and Shops Act, 1970 (Act 328) of Ghana. The study also investigated the prevalence of health and safety challenges and work related injuries among Ghanaian local artisans. The mode of treating health and safety incidents experienced by the artisans was also investigated. One hundred and fifty artisans, comprising 141 males and 9 females were studied in a descriptive survey. The results showed that the work environment of the artisans was not very congenial and most of them did not comply with many of the safety regulations. Several incidents and injuries were experienced by the artisans and a great number of them also reported work-related health challenges. It was also found that about 38% of the health and safety challenges were treated at the hospital and more than 48% were self-treated by the artisans. The study concluded that the noncompliance of safe work procedures accounted for most of the health and safety incidents the artisans experienced. Among others, it was recommended that the Inspectorate Directorate of the Ministry of Employment and Labor Relations should extend its inspections and health and safety compliance and education functions to the operations of auto artisans and other informal work settings.
FACTORS THAT AFFECT THE USE OF PERSONAL PROTECTIVE EQUIPMENT ON GHANAIAN CONSTRUCTION SITES
2016
This study is part of a broader study into the use of Personal Protective Equipment (PPE) in the construction industry in Ghana. The study investigates the factors that contribute to the reluctance or failure of workers to use PPE. Primary data were collected by the researchers via a questionnaire survey of 123 site workers selected from construction sites which were active with at least 50 operatives, had a high probability of encountering the types of hazards identified in literature and above all, sites that encouraged the use of PPE by workers. The findings of the study suggest that construction workers in Ghana are aware of the importance of PPE but some fail to use them because of discomfort, interference with work, lack of knowledge of how to use them, and failure of some employers or their agents to supply them. The implications of these findings are that every effort must be made by stakeholders in the PPE supply chain to take steps to minimise the discomfort suffered by employees and to make them less intrusive. It is also important to enforce existing regulations which make it mandatory for employers to provide PPE and for workers to use them.
2020
Background: Road construction work has its own specific set of risks and safety issues. It has not been adequately addressed in most low- and middle-income countries, especially in Africa. The objective of this study was to determine the prevalence of personal protective equipment (PPE) use during road construction activities by workers in foreign-owned against locally-owned road construction companies in Ghana.Methods: An institution-based cross-sectional survey was undertaken during January – March, 2020 to study 389 road construction workers who were actively working on site. They were unobtrusively observed to capture whether or not they wore the appropriate PPE at the time of the survey. The PPE of interest were: hard hat, goggles, shoes, nose masks, hearing protection, gloves, and reflective vests/apparel. On-site posted PPE signage was also checked. Results: Majority of workers were labourers (53.5%) and males (96.9%). Similar numbers of workers in foreign-owned (194) and loc...
Journal of Environmental and Public Health
Background. Personal protective equipment was designed to protect workers from serious workplace injuries or illnesses resulting from contact with chemical, radiological, physical, electrical, mechanical, or other workplace hazards. Use of personal protective equipment has been identified as an important hazard control strategy in work environments where it may not be practical to adopt other strategies. Objective. To determine personal protective equipment utilization and its associated factors based on health belief model among large scale factory workers in Debre-Birhan, Ethiopia. Methods. An institution-based cross-sectional study was employed in Debre-Birhan Town, North Shoa Ethiopia, from April 1 to May 1, 2021. The data were collected by using an interviewer-administered structured questionnaire. A total of 412 samples were selected by systematic random sampling method. The data were entered to EpiData version 3.1 and analyzed by SPSS. All independent variables were fitted in...
In organizations where neglect of safety gears is common, there are high risks of work-related accidents which can be catastrophic. It is against this backdrop that this study was conducted to assess the determinants of use of personal protective equipment (PPE) at the global interfreight clearance agency SPEDAG based at their premises in Kampala, Uganda. Specifically the study was to establish the level of utilization and the determinants for use of such PPE. The study collected quantitative data using questionnaires from a random sample and qualitative data from purposively selected members of top management (Key informants). The results show a relatively high level (70.1%) use of PPEs, a high positive attitude (95%) towards PPE use and a high (95%) availability of guidelines or policies regarding use of PPEs. The results show that the use of the PPE is taken as pertinent and necessary among the employees. These results were confirmed by the qualitative results from the key informants. The authors concluded that continuous sensitization and sustained availability of guidelines and policies must be strongly supported to maximize use of PPEs. The major recommendation is that policy makers in consultation with work safety practitioners should design policies that are sensitive to the perceptions of the users for effective improved use of PPE.
PLOS ONE, 2021
Artisanal goldminers in Ghana are exposed to various levels and forms of health, safety and environmental threats. Without the required legislation and regulations, artisanal miners are responsible for their own health and safety at work. Consequently, understanding the probabilities of self-protection at work by artisanal goldminers is crucial. A cross-sectional survey of 500 artisanal goldminers was conducted to examine the probabilities of personal protective equipment use among artisanal goldminers in Ghana. The data was subjected to both descriptive and inferential statistics. Initial findings showed that personal protective equipment use among artisanal miners was 77.4%. Overall, higher probabilities of personal protective equipment use was observed among artisanal goldminers who work in good health and safety conditions as compared to artisanal miners who work in poor health and safety conditions. Also, personal protective equipment use was more probable among the highly educ...
Occupational health and safety practices among vehicle repair artisans in an urban area in Ghana
J Environ Occup Sci. 2014; 3(3): 147-153
Aim: The aim of the study was to assess the extent of work-related injuries and illnesses, access to first aid, use of Personal Protective Equipment (PPE), fire safety measures and hand hygiene practices among vehicle repair artisans. Materials and Methods: Study respondents were 100 vehicle repair artisans comprising of 28 Auto mechanics, 20 electricians, 26 welders, 18 sprayers, and 8 automobile interior designers selected by simple random sampling. Semi-structured questionnaires, extensive field observations and key informant interviews were used to collect primary data in 2013/2014 and analyzed with Minitab version 16 in 2014. Results: Close to two-thirds (64%) of the artisans have sustained work-related injuries mostly resulting from cuts and burns. Respondents’ marital status (P = 0.014) and the type of work (P = 0.037) were found to be significantly associated with the incidence of physical injury, in contrast to their level of education (P = 0.874) and work experience (P = 0.203). Seventy-eight percent of the artisans lack training in fire safety and besides, basic firefighting equipment are non-existent in the workshops visited. Self-medication after injury (55%; N = 64) and ignorance in first aid administration (92%) are common among the artisans. Further, due to the physical exertions required by their work, most artisans (N = 57) experience musculoskeletal disorders. Use of PPE (27%) and proper hand hygiene practices (28%; N = 98) are generally ignored by the artisans posing possible health risks. Conclusions: Vehicle repair workers need to be educated on the dangers associated with their work and the best practices to be adopted to curb or forestall these risks.