Student Design, Development, And Operations Of Small Satellites At The United States Air Force Academy (original) (raw)
Related papers
Aerospace Systems Science and Engineering Program: A Novel Integrated Approach
DergiPark (Istanbul University), 2019
A recent report on the global road map for 2015-2025 commissioned by COSPAR and ILWS emphasized the growing appreciation that the environmental conditions that we call space weather impact the technological infrastructure that powers the coupled economies around the world (Carolus, 2015). Since space borne theoretical and practical problems are complicated enough, an up to date science and engineering curricula may need to be considered to cope with such cases. The program/curricula is meant to combine basic sciences, space sciences and technology under a system engineering umbrella. In short, the objective of this program is to produce graduates who will be capable of tackling space programs with deep confidence in an integrated and interdisciplinary manner. In other words, the graduates will be able to take care of these problems from a broad-wide spectrum including for example, space sciences, such as space weather on one side, and very specific technological problems, such as space debris on the other side. So, in this paper we propose an engineering education program.
Student Expectations from Participating in a Small Spacecraft Development Program
Aerospace, 2013
The number of small spacecraft development programs in the United States and worldwide have increased significantly over the course of the last 10 years. This paper analyzes reasons for the growth in these programs by assessing what student participants hope to gain from their participation. Participants in the OpenOrbiter Small Spacecraft Development Initiative at the University of North Dakota were surveyed at the beginning of an academic year to determine why they were planning to participate in the program again or join and participate for the first time. This paper presents the results of this survey.
In August of 2006, faculty and students at The Pennsylvania State University established the Student Space Programs Laboratory (SSPL) in an effort to consolidate and formalize space systems research and education at the University as well as to improve student opportunities. Further, SSPL strives to encourage collaboration with international institutions as a valuable resource and learning experience for its students. Because of the synergies between projects and the growing number and complexity of the projects, the need for a central management structure and systems engineering framework was evident. This paper is an update from the discussion presented at the 18th ESA PAC meeting, when the SSPL was still in its infancy. Now in existence for three years, the Lab has faced several challenges, such as managing the Lab's resources across multiple projects; enabling communication and collaboration between student teams; student retention and training; and formalizing effective pro...
Pre-University Outreach Through a Satellite Design Competition
Proceedings of the Canadian Engineering Education Association
The Engineering Profession is seen as a holistic discipline affecting many areas of everyday life. Even though practicing professionals would not dispute the statement, it is often hard to convey the idea to preuniversity students, as it appears overwhelming and presumptuous. Examples comprising of many different subjects such as bridges, airplanes, and computers, are used to reduce the anxiety. But, these examples are part of everyday life and thus fail to inspire a new generation ofengineers. To overcome this problem, the University of Manitoba Space Applications and Technology Society is using a student-designed nano-satellite, T-Sat, as a means to promote the profession and motivate a new generation by making space accessible to undergraduate and graduate students. This paper describes the outreach presentations and hands-on workshops organized through a satellite design competition that have reached more than 3,000 pre-university students, university students, and industry prof...
The Student Space Systems Fabrication Laboratory: An Approach To Space Systems Engineering Education
2006 Annual Conference & Exposition Proceedings
The Student Space Systems Fabrication Laboratory (S3FL) is a student-led organization dedicated to providing students with practical space systems design and fabrication experience not readily available through the usual academic curriculum. S3FL's approach is to enhance education by coupling classroom knowledge with practicum experience involving real engineering design, analysis, test, fabrication, integration, and operation of actual flight vehicles and space payloads. Each year, S3FL involves over a hundred undergraduate and graduate students in activities ranging from balloon payloads to microgravity experiments to nanosatellites. By participating in the end-to-end development of complete space systems, students acquire knowledge and expertise that would otherwise take years of postgraduate experience to be achieved.
Challenges Facing The Student Space Systems Fabrication Laboratory And Lessons Learned
2007 Annual Conference & Exposition Proceedings
The Student Space Systems Fabrication Laboratory (S3FL) is a student-led organization dedicated to providing students with practical space systems design and fabrication experience not readily available through the usual academic curriculum. S3FL's approach is to enhance space systems engineering education by coupling classroom knowledge with practicum experience involving real engineering design, analysis, test, fabrication, integration, and operation of actual flight vehicles and payloads. Through a continuous learning process and by adapting to new challenges, S3FL has sustained itself despite the difficulties of accommodating an increasing number of student members. S3FL has also been able to maintain effective project leadership and technical expertise despite student turnover as well as to secure external support. The paper discusses the methods and strategies adopted by S3FL to address the challenges facing a student-run lab. Case studies of projects are also used to highlight important lessons learned over the years.
An opportunity to train students in sciences and space technologies
The Comisión Nacional de Actividades Espaciales (CONAE-Argentine space agency), following the guidelines established in the Argentine National Space Plan, has created the Unidad de Formación Superior (UFS) for the highest-level training of human resources in science and space technologies, in order to meet the needs of the institutions of the Argentine technological/scientific system and/or the companies participating in the implementation of the National Space Plan. Within this context, CONAE in association with several Argentine Universities implemented four new graduate programs: Master's Degrees in Space Information Applications, in Software Development for Space Applications, in Satellite Technologies and in Satellite Instruments. These programs include: teaching of specific courses, student participation in Labs/Projects/Companies related to their fields of study, development of a Master's Thesis and the participation of the students of the four master programs in a single space mission. The primary academic goal of the mission Formador Satelital 2017 (FS2017) is to train the UFS`s Master Degree students in all main technical and programmatic subjects related to their disciplines. This paper presents a summary regarding the mission implementation, particularly describing its Objectives, Success Criteria, Mission Concept Selection, Management Approach, High Level Requirements, Technical Implementation and the Information and Configuration Management Approaches.
A Methodology for Successful University Graduate CubeSat Programs
2020
The University of Colorado Smead Department of Aerospace Engineering has over a decade of success in designing, building, and operating student led CubeSat missions. The experience and lessons learned from building and operating the CSSWE, MinXSS-1, MinXSS-2, and QB50-Challenger missions have helped grow a knowledge base on the most effective and efficient ways to manage some of the “tall poles” when it comes to student run CubeSat missions. Among these “tall poles” we have seen student turnover, software, and documentation become some of the hardest to knockdown and we present our strategies for doing so. We use the MAXWELL mission (expected to launch in 2021) as a road-map to detail the methodology we have built over the last decade to ensure the greatest chance of mission success. INTRODUCTION CubeSats at the University of Colorado The University of Colorado Smead Aerospace graduate program has launched and operated four successful missions to date: CSSWE [1] [2], MinXSS-1 [3], M...
2010
ESA provides numerous opportunities for university students from ESA Member and Cooperating States to gain practical hands-on engineering experience on real space projects. These opportunities cover a broad spectrum of flight project activities ranging from student experiment payloads on microgravity platforms, atmospheric balloons, and sub-orbital sounding rockets to instruments and small platforms for Earth and Moon orbiting satellites. The education satellite projects range in size from pico-satellites to mini-satellites and are complemented by a global network of education institution and radio amateur ground stations. This paper describes the hands-on space engineering education programme and its setup, the engineering education methods, and the knowledge/skills transferred to the students, in addition to summary technical information on the projects concerned.