Magnetic microswimmers propelling through biorheological liquid bounded within an active channel (original) (raw)
Related papers
Computers & Mathematics with Applications, 2019
Abstract There are many unicellular tiny organisms which can self-propel collectively through non-Newtonian fluids by means of producing undulating deformation. Example includes nematodes, rod shaped bacteria and spermatozoa. Here we use Taylor’s swimming sheet model, with non-Newtonian fluid bounded with in a complex wavy walls of a two-dimensional channel. Oldroyd-4 constant fluid is approximated as cervical mucus and MHD effects are also considered. After utilizing lubrication and creeping flow assumption the reduced non-linear differential equation is solved (by implicit finite difference technique) so that it will satisfy the dynamic equilibrium condition for steady propulsion. For a special (Newtonian) case the expressions of swimming speed and flow rate are also presented. We also demonstrate that the rheological properties of non-Newtonian fluid can assist or resist the pack of micro-organisms (swimming sheet), while the larger undulation amplitude in swimmer’s body and magnetic field in downward direction can enhance the propulsion speed. The solution obtained via implicit finite difference method is also validated by a built in MATLAB routine bvp-4c. This built in function is based on collocation technique. Moreover an excellent correlation is achieved for both numerical methods.
Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2019
The efficient magnetic swimming of actual or mechanically designed microswimmers within bounded regions is reliant on several factors: the actuation of these swimmers via magnetic field, rheology of surrounding liquid (with dominant viscous forces), nature of medium (either porous or non-porous), position (either straight, inclined or declined) and state (either active or passive) of the narrow passage. To witness these interactions, we utilize Carreau fluid with Taylor swimming sheet model under magnetic and porous effects. Moreover, the cervical canal is approximated as a two-dimensional complex wavy channel inclined at certain angle with the horizontal. The momentum equations are reduced by means of lubrication assumption, which finally leads to a fourth-order differential equation. MATLAB's built-in bvp4c function is employed to solve the resulting boundary value problem. The solution obtained via bvp4c is further verified by finite difference method. In both these methods, the refined values of flow rate and cell speed are computed by utilizing modified Newton-Raphson method. These realistic pairs are further utilized to calculate the energy delivered by the microswimmer. The numerical results are plotted and discussed at the end of the article. Our study explains that the optimum speed of the microorganism can be achieved by means of exploiting the fluid rheology and with the suitable application of the magnetic field. The peristaltic nature of the channel walls and porous medium may also serve as alternative factors to control the speed of the propeller.
Mathematical Problems in Engineering
The time-dependent mixed bioconvection flow of an electrically conducting fluid between two infinite parallel plates in the presence of a magnetic field and a first-order chemical reaction is investigated. The fully coupled nonlinear systems describing the total mass, momentum, thermal energy, mass diffusion, and microorganisms equations are reduced to a set of ordinary differential equations via a set of new similarity transformations. The detailed analysis illustrating the influences of various physical parameters such as the magnetic, squeezing, and chemical reaction parameters and the Schmidt and Prandtl numbers on the distributions of temperature and microorganisms as well as the skin friction and the Nusselt number is presented. The conclusion is drawn that the flow field, temperature, and chemical reaction profiles are significantly influenced by magnetic parameter, heat generation/absorption parameter, and chemical parameter. Some examples of potential applications of such b...
Simulations of peristaltic slip-flow of hydromagnetic bio-fluid in a curved channel
AIP Advances, 2016
The influence of slip and magnetic field on transport characteristics of a bio-fluid are analyzed in a curved channel. The problem is modeled in curvilinear coordinate system under the assumption that the wavelength of the peristaltic wave is larger in magnitude compared to the width of the channel. The resulting nonlinear boundary value problem (BVP) is solved using an implicit finite difference technique (FDT). The flow velocity, pressure rise per wavelength and stream function are illustrated through graphs for various values of rheological and geometrical parameters of the problem. The study reveals that a thin boundary layer exists at the channel wall for strong magnetic field. Moreover, small values of Weissenberg number counteract the curvature and make the velocity profile symmetric. It is also observed that pressure rise per wavelength in pumping region increases (decreases) by increasing magnetic field, Weissenberg number and curvature of the channel (slip parameter).
Frontiers in Physics
As a result of its wide range of applications, FSI has grabbed the attention of researchers and scientists. In this study we consider an incompressible, laminar fluid flowing through the bifurcated channel. The wavy walls of the channel are considered elastic. Moreover, a magnetic field is applied towards the axial direction of the flow. Using a two-way fluid-structure interaction, an Arbitrary Lagrangian-Eulerian (ALE) formulation is used for coupling the problem. The problem is discretized using P2 and P1 finite element methods to approximate the displacement, pressure, and velocity. The linearized system of equations is solved using Newton’s iterative scheme. The analysis is carried out for the Reynolds number and Hartman number. The ranges of the studied parameters are Reynolds number 300≤Re≤1000 and Hartmann number 0≤Ha≤10. The hemodynamic effects on the bifurcated channel and elastic walls are calculated using velocity, pressure, wall shear stresses (WSS), and loads at the wal...
Biofluid flow in a channel under the action of a uniform localized magnetic field
Computational Mechanics, 2005
In this work the fundamental problem of the biomagnetic (blood) fluid flow in a channel under the influence of a steady localized magnetic field is studied. For the mathematical formulation of the problem both magnetization and electrical conductivity of blood are taken into account and blood is considered as a homogeneous Newtonian fluid. For the numerical solution of the problem, which is described by a coupled, non linear system of PDEs, with appropriate boundary conditions, the stream function-vorticity formulation is adopted. The solution is obtained by the development of an efficient numerical technique based on finite differences. Results concerning the velocity and temperature field, skin friction and rate of heat transfer, indicate that the presence of the magnetic field influences considerably the flow field. It is also obtained that the electrical conductivity of blood should be taken into account at the area of the uniform magnetic field.
International Journal of Engineering Science, 2006
The fundamental problem of the turbulent flow of a biomagnetic fluid (blood) between two parallel plates under the action of a localized magnetic field is studied. The blood is considered to be an electrically conducting, incompressible and Newtonian fluid and its flow is steady, two-dimensional and turbulent. The turbulent flow is described by the Reynolds Averaged Navier-Stokes (RANS) equations. For the numerical solution of the problem under consideration, which is described by a coupled and non linear system of PDEs, with appropriate boundary conditions, the stream functionvorticity formulation is used. For the eddy-kinematic viscosity, the low Reynolds number k-ε turbulence model is adopted. The solution of the problem, for different values of the dimensionless parameter entering into it, is obtained by developing and applying an efficient numerical technique based on finite differences scheme. Results concerning the velocity and temperature field, skin friction and rate of heat transfer, indicate that the presence of the localized magnetic field, appreciable influences the turbulent flow field. A comparison is also made with the corresponding laminar flow, indicating that the influence of the magnetic field decreases in the presence of turbulence.
Journal of Thermal Analysis and Calorimetry, 2020
This article addresses the time-dependent flow of magnetized rheological Carreau nanoliquid conveying microorganisms over a moving wedge with velocity slip and thermal radiation features. Carreau fluid is auspicious to depict several types of physical issues because this fluid model has the capability of revealing the rheology of multiple specific fluids such as fluids with brief-chain suspension particles, fluid crystals, detergents, and blood in animals and humans. The mathematical formulation is developed by combining the impact of infinite shear rate viscosity. The physical aspects for both static and moving are discussed in detail. At first, relevant similarity transformations are employed to obtain dimensionless form of equations, and then renovated equations have been solved numerically by employing bvp4c via MATLAB based on shooting technique. Both the numerical and graphical results against physical quantities, such as velocity temperature, nanoparticles concentration and density of gyrotactic microorganism, are observed under the influence of physical parameters.
Microgravity Science and Technology, 2018
Nanofluid dynamics with magnetohydrodynamics has tremendously contributed in industrial applications recently since presence of nanoparticle in base fluids enhances the specific chemical and physical properties. Owing to the relevance of nanofluid dynamics, we analyze the nanofluid flow in the presence of gyrotactic microorganism and magnetohydrodynamics through a stretching/shrinking plate. The impacts of chemical reaction and thermal radiation on flow characteristics are also studied. To simplify the governing equations of microorganisms, velocity, concentration and temperature, the similarity transformations are employed. The couple governing equations are numerically solved using Successive Taylor Series Linearization Method (STSLM). The velocity profile, motile microorganism density profile, concentration profile, temperature profile as well as Nusselt number, skin friction coefficient, Sherwood number and density number of motile microorganisms are discussed using tables and graphs against all the sundry parameters. A numerical comparison is also given for Nusselt number, Sherwood number, skin friction, and density number of motile microorganisms with previously published results to validate the present model. The results show that Nusselt number, Sherwood number and density number diminish with increasing the magnetic field effects. Keywords Nanofluiddynamics • Magnetohydrodynamics • STSLM • Gyrotactic microorganism • Thermophoresis Nomenclaturē B 0 Magnetic field (T) xūv Components of velocity (m/s) α Thermal conductivity (W/mK) DT Thermophoretic coefficient K c Chemical reaction parameter S c Schmidt number S b Bioconvection Schmidt number M Magnetic field parameter (T) S Suction/injection parameter T w Temperature of the wall (K) D. Tripathi
Biomagnetic fluid flow in a channel with stenosis
In this study, the fundamental problem of the biomagnetic (blood) fluid flow in a channel with stenosis under the influence of a steady localized magnetic field is studied. The mathematical model used for the formulation of the problem is consistent with the principles of ferrohydrodynamics (FHD) and magnetohydrodynamics (MHD). Blood is considered as a homogeneous Newtonian fluid and is treated as an electrically conducting magnetic fluid which also exhibits magnetization. For the numerical solution of the problem, which is described by a coupled, non-linear system of PDEs, with appropriate boundary conditions, the stream function–vorticity formulation is adopted. The solution is obtained by the development of an efficient pseudotransient numerical methodology using finite differences. This methodology is based on the development of a semi-implicit numerical technique, transformations and stretching of the grid and proper construction of the boundary conditions for the vorticity. Results concerning the velocity and temperature field, skin friction and rate of heat transfer indicate that the presence of the magnetic field influences the flow field considerably.