Recycling Wastewater with Membrane Technology and The Case of Singapore (original) (raw)
Related papers
Wastewater and drinking water treatment by membrane processes: from laboratory to pilot-scale
2018
The concern with water quality problems worldwide has led to the improvement of water/wastewater treatment processes. In this PhD project, industrial water and drinking water treatments using membrane processes were investigated in three different case studies. The main aim of these works was the assessment, optimisation and validation of the process’s technologies for the respective case studies. These studies included in a laboratory stage followed by a pilot-scale stage. The first case study contemplates residual water from a rubber industry presenting high chemical oxygen demand (COD). The impact of retrofitting of the existent wastewater treatment process with the replacement of the previously used evaporator with an integrate system (nanofiltration+ evaporator), was evaluated. Two modes of operation were considered, batch and continuous, depending on the daily flowrate of water to be treated in this industry. The second case study addresses surface water treatment, for product...
The role of membrane processes in municipal wastewater reclamation and reuse
Desalination, 2005
Wastewater reuse presents a promising solution to the growing pressure on water resources. However, wastewater reuse implementation faces obstacles that include insufficient public acceptance, technical, economic and hygienic risks and further uncertainties caused by a lack of awareness, accepted standards, uniform guidelines and legislation. So far, there are no supranational regulations on water reuse in Europe and further development is slowed by lack of widely accepted standards e.g. in terms of required water quality, treatment technology and distribution system design and operation.
Reuse of reverse osmosis membranes in advanced wastewater treatment
Desalination, 2002
In areas where tap water has a high salt content, wastewater is not appropriate for reuse in agriculture, particularly for sensitive crops. One alternative is reduction, via desalination, of the brackish character to the secondary effluent. A filtration stage is also required before desalination. On the other hand, used reverse osmosis membranes can be recycled and used as filters in the advanced treatment stage in order to reduce suspended matter contained in the secondary effluent -one advantage being the environmental recovery of solid waste. Used membranes can be treated with strong chemical oxidants to peel off the active separation layer in order to transform them into microfiltration or ultrafiltration elements. Preliminaxy tests have been carried out with 8" elements, aimed at comparing membrane performance before and after the peeling process. An index denoted as peeling effectiveness (high flux, high salt passage) is used for comparison. It was soon observed that potassium permanganate was more effective than others, together with sodium hydroxide. Doses around 1000 mg/L KMnO, provided the best results. It was also concluded that membrane cleaning, done with sodium bisulphite prior to peeling, was better when recirculating the cleaning solution around the membrane rather than soaking it. Next steps in the research will test the actual filtration capability of the peeled membranes in actual wastewater.
Membrane developed systems for water and wastewater treatment
Environmental Progress, 2005
Existing water supplies may be limited in quantity or quality for meeting the increasing demands from population growth and industry expansion. In many arid and semiarid areas, providing the large volume of water required for industrial, agricultural, recreational, and potable applications is especially difficult. So, searching for "new" water sources is a task for researchers in the water works field. Municipal wastewater, which constitutes between 75 and 80% of consumed water in most cities, is one of the most reliable sources of water because its volume varies little throughout the year [1]. Through suitable treatment, reclaimed wastewater can meet various water quality requirements for potential wastewater reuse [2]. A wide variety of treatment technologies have been studied and developed for reclaiming secondary effluents, such as processes coupling, chemical oxidation, depth filtration, adsorption, air stripping, ion exchange, electrodialysis, surface filtration, chemical precipitation, and membrane processes [3]. Membrane treatment has increased in prevalence during recent years because it represents an alternative treatment that produces stable high water quality for compliance with stringent water quality regulations. Many studies have been performed concerning the treatment of secondary effluent with membrane processes. Ghayeni et al. [1] applied four different low operating pressure reverse-osmosis (RO) membranes [PVD and CTA from Hydranautics (San Diego, CA), TFCL from Koch membrane (San Diego, CA), and NF45 from FilmTech (Toronto, Ontario, Canada)], with MF pretreatment, to evaluate the high-quality production from secondary effluent. Results showed that the TFCL membrane was the most suitable membrane for treatment of secondary effluents because of its better rejection ability: a 99.2% rejection of conductivity, 100%
Sustainability, 2021
Discharged water from the oil and gas fields is a common type of wastewater called produced water (PW). It consists of different combinations of salinities, oils, and mineral deposits. Growing industrial demand, accelerated urbanization, and rapid population growth are putting enormous strain on the world’s water supply. Based on sustainable freshwater supplies, North Africa, the Middle East, and South Asia confront the ultimate water shortages threat. Proper implementation of innovative membrane technologies in wastewater treatment is considered a solution towards tackling water insecurity and sustainability. Different types of innovative membrane technologies used for produced water treatment were considered in this work. A framework of innovative membrane technology was studied for industrial wastewater with direct contribution to the environmental and economical sustainability factors, taking into consideration grand challenges and limitations in energy costs and environmental c...
Membranes for Industrial Water Reuse – They're Not Just for Municipal Applications Anymore
Proceedings of the Water Environment Federation, 2007
Over the last few years, membranes have become the preferred treatment technology in municipal water and wastewater treatment. However, many industrial treatment processes have continued to rely on conventional techniques. With recent improvements in membrane technologies, and with more stringent discharge requirements for industrial systems, membranes are becoming the preferred treatment technology for industrial processes as well. Common applications for using membranes in industrial treatment systems include:-Secondary treatment, using Membrane Bio-Reactors (MBR), where BOD and TSS limits are being tightened.-Tertiary treatment, using low pressure membranes (e.g. Microfiltration), where the effluent is being reused.-Tertiary treatment, using high pressure membranes (e.g. Nanofiltration, Reverse Osmosis [RO]), when Total Dissolved Solids, metals, and/or emerging contaminants must be removed to meet tightened discharge requirements. Most industrial wastewater streams contain higher organic loads, measured in thousands of mg/l BOD and COD, than municipal streams. Also, many industrial streams have high concentrations of TDS. Finally, peaking factors for industrial streams tend to be much higher than for municipal streams. These factors make industrial treatment systems challenging to design. This presentation provides information on how membranes have been or will be used in several industrial applications to achieve treatment targets.
Journal of Water Reuse and Desalination
The objective of this paper is to compare, under Dutch market conditions, the energy consumption and net costs of membrane-based advanced treatment processes for three water reuse types (i.e. potable, industrial, agricultural reuse). The water source is municipal wastewater treatment plant effluent. Results indicate that the application of reverse osmosis is needed to reclaim high quality water for industrial and potable reuse but not for irrigation water which offers significant energy savings but may not lead automatically to lower net costs. While a reclamation process for industrial reuse is economically most promising, irrigation water reclamation processes are not cost effective due to low water prices. Moreover, process operational expenditures may exceed capital expenditures which is important for tender procedures. A significant cost factor is waste management that may exceed energy costs. Water recovery rates could be significantly enhanced through the integration of a sof...
Life Cycle Assessment of Membrane System for Wastewater Treatment: a Review and Further Research
Membrane technology has received increasing attention for the treatment of wastewaters lately. The use of membrane system showed high demand in industries. The Life Cycle Assessment (LCA) will be used to evaluate the environmental impacts of membrane system from raw materials, continues with product development and manufacturing, and finally ends when all materials are returned to earth. This paper presents a review of researchers on LCA, membrane manufacture and application to suggest corresponding further research direction. A methodology for sustainable assessment will be developed for membrane system for wastewater treatment for small and medium enterprise (SME). Introduction In recent years, sustainability issue became a high priority for wastewater treatment process. There is therefore a need to improve the sustainability of the industrial practice by taking sustainability elements; environmental, economical and social as important consideration. By 2025, nearly one third of the population will suffer from a water stress situation [1]. That is why membrane system is playing an important role for treatment of wastewaters and is particularly drawing attention on water recycling schemes [2]. The rapidly growing research works and awareness in this technology together with the declining trend in membrane costs further promotes the adoption of membrane treatment to deliver efficient water processing. Sustainable development has become an important environmental benchmark for wastewater treatment plants in chemical process industry. In this context, membrane system has been the method of choice in water treatment industry due to it is potential to deliver high quality water, thus the use of membrane technology for water supply, including reclamation, needs to be scrutinized in terms of ecological sustainability. This is in line with the government's newly introduced National Green Technology as to provide direction and motivation for Malaysians to continuously enjoy good quality living and a healthy environment [3]. In order to achieve sustainable membrane system, measurement of sustainability related to whole life cycle is needed. It is important to assess the emission through life cycle, reduce the environmental impact and maintain the quality and safety of the membrane system. This paper reviews the researches in the area of LCA of membrane system for wastewater treatment in order to develop a new methodology more effective.