Chemical Properties of the Metallic Elements and the Mass Concentration of PM10and PM2.5Observed in Busan, Korea in Springtime of 2006-2008 (original) (raw)
Related papers
PLOS ONE, 2020
This study examined the consciousness of husbands and wives on babies' cries and its factors which have impacts on their emotional perceptions. For this study, infants' cries were recorded with the participation of 136 pregnant women and 76 husbands, and they conducted self-evaluations regarding their emotional perceptions and personal characteristics. The stimulus used to exhibit the cries of infants were from eighteen recorded cry sample under three situations (hunger, pain, and mother's absence) with six healthy infants (three male and three female) who are over six months. Also, this study dealt with the relationship between emotional assessment and the personal characteristics of mothers and fathers. As a result, the experience of child-rearing has a positive influence on the emotional cry perceptions of husbands and wives, and there was no sex difference in their emotional cry perceptions. A change of recognition, "being parents," has impacts on emotional cry perceptions, but the major factors increasing these impacts depend on the physiological changes of pregnant women and their personal characteristics. (infant crying), (emotional perception), (personality)
Distribution of CO_2CO_2CO_2 produced from fossil fuel by accelerator mass spectrometry: in Daejeon
We have collected a batch of leaf samples at several main crossroads in Daejeon and abackground site to obtain distribution of CO2 (greenhouse gas) due to fossil fuel combustion. The leaf14C values of them were measured using AMS. 14C valuesof downtown sites were found to be lower by 27-102. than that of the background site, and the ratioof CO2 originated from fossil fuel combustion in the atmosphere of Daejeon could be calculated fromthe diferences of 14C values. The average 14was measured to be 35. 8 . , and this value is lower than 66.3. , which have been known as thebackgdound values in USA.
Journal of Korean Society of Occupational and Environmental Hygiene
Objectives: The objective of this study is the estimation of factors influencing airborne fiber concentrations by means of an observation survey of asbestos-containing materials in buildings. Methods: Forty-five samples were collected from four commercial buildings by NIOSH Method 7400 and classified according to current condition, potential activity, construction year, and operations and maintenance(O&M). Results: Airborne fiber concentrations by current condition(classified as good, fair and poor) were significantly different(p<0.05). Concentrations by potential activity were significantly different among groups(p<0.05), and those from the low activity group were higher than those from the middle activity group. Based on construction year, airborne fiber concentrations from the decade of the 1990's were higher than those from the 1960's. When O&M status was considered, airborne fiber concentrations from 1960's buildings were lower than those buildings not operated and maintained(p<0.01), because dust generation was influenced by O&M status. It was found that airborne fiber concentrations were related to current condition and potential activity via regression analysis, but the coefficient of determination was low. Also, correlation analysis showed that the higher the potential activity, the more current condition is worsened, but the relationship was not significant(r=-0.455, p>0.05). Conclusions: Airborne fiber concentrations in asbestos-containing buildings had weak relationships with current condition and potential activity.
Korean Journal of Soil Science and Fertilizer, 2018
Long-term monitoring of soil chemical properties is the main agricultural practices to improve crop yield and soil fertility. Field monitoring was performed to evaluate the chemical properties of 200 greenhouse soil samples every 4 years from 2000 to 2016 in Gyeongnam province, South Korea. Soil properties such as pH, electrical conductivity (EC), amount of organic matter (OM), available phosphate (P 2 O 5), nitrate nitrogen (NO 3-N), exchangeable potassium (K), calcium (Ca), magnesium (Mg), and sodium (Na) were analyzed. In 2016, the average concentration of soils under greenhouse condition showed 6.8 for pH, 3.52 dS m-1 for EC, 40 g kg-1 for OM, 1,065 mg kg-1 for P 2 O 5 , 154 mg kg-1 for NO 3-N, 2.35 cmol c kg-1 for K, 12.8 cmol c kg-1 for Ca, 4.0 cmol c kg-1 for Mg, and 0.91 cmol c kg-1 for Na. In addition, the average concentrations of OM, K, Ca, and Na have tended to increase with year. In 2016, the frequency distribution of excessive level of soils under greenhouse condition was 43% for pH, 61% for OM, 94% for P 2 O 5 , 89% for K, 96% for Ca, and 83% for Mg. Soil EC values of green pepper, tomato, and lettuce were significantly higher than those of carrot, strawberry, and squash (p < 0.05), whereas soil pH was significantly lower in the carrot and lettuce than that in the strawberry (p < 0.05). Soil pH was significantly correlated with the EC, NO 3-N, K, Ca, Mg, and Na. The value of EC was also positively correlated with the OM, P 2 O 5 , NO 3-N, K, Ca, Mg, and Na. In conclusion, the long-term information on soil chemical properties will be helpful to improve sustainable soil and nutrient management for greenhouse farming.
규제해제 대상 방사성 금속 폐기물 최종잔류방사능 측정법
Journal of Radiation Protection, 2013
It has been continuously generated the requirement for the replacement of the main components such as a steam generator due to the deterioration of the nuclear power plant all around the world. Also, a large amount of radioactive metal was generated during the decommissioning in a short period. It is required to make an accurate measurement of the residual radioactivity for recycling the metal waste for releasing from regulatory control. In planning the measurement procedures, the influence of geometry, self-absorption, density and other relevant factors on the representativeness of the measurements should be considered for the decommissioning metal waste. In this study, the method for measurement procedures, the source term evaluation, the ways to secure representative samples, the measurement device for wide area and the self-absorption correction factors for different density were evaluated. The metal samples for measurement were prepared for securing the simple geometry and representative by melting process. The developed correction method for measuring the radioactivity a variety density of metal waste could improve the reliability of the evaluation results for clearance.
AI-Based Particle Position Prediction Near Southwestern Area of Jeju Island
Journal of Korean Society of Coastal and Ocean Engineers
Positions of five drifting buoys deployed on August 2020 near southwestern area of Jeju Island and numerically predicted velocities were used to develop five Artificial Intelligence-based models (AI models) for the prediction of particle tracks. Five AI models consisted of three machine learning models (Extra Trees, LightGBM, and Support Vector Machine) and two deep learning models (DNN and RBFN). To evaluate the prediction accuracy for six models, the predicted positions from five AI models and one numerical model were compared with the observed positions from five drifting buoys. Three skills (MAE, RMSE, and NCLS) for the five buoys and their averaged values were calculated. DNN model showed the best prediction accuracy in MAE, RMSE, and NCLS.
가구 탄소모니터링 시스템에 의한 탄소배출특성 - 세종시 첫마을을 대상으로
Journal of the Korea Institute of Ecological Architecture and Environment, 2013
Korean Government has developed Sejong City as a new administration city. This city of future was planned and designed toward one of the most eco-friendly city on the basis of ICTs. To attain this object, a carbon emission monitoring system (CEMS) was designed and installed as a part of u-city service which provides various information anytime and anywhere to enrich the people's quality of life. In this paper, at first, the structure and functions of CEMS are introduced. This system is consist of 5 parts-data collection from user and linked public DBs, transforming data into meaningful information for the policy makers, system-user interfacing via statistical tables and graphs, and system maintenance. This system can be operated by the citizen participation through whole the process. With the help of GIS map and graphic interface, statistics of monitored data for both citizen and decision maker provided and after feedback , they have affected on the behaviour of citizen's energy consumption and related policy as well. By the CEMS, energy consumption data of 124 agreed households were collected during 9 months in 2012. Electricity, gas and water consumption were remote-metered automatically by the system and analysed. This showed that more than 85% of CO2 emission is rely on electricity usage. Furthermore, number of family members and size of house influences on the emission of CO2 by each household together with the lifestyle of the occupants. Electricity and water consumption showed the seasonal factor while gas consumption represents the number of family members. Even this paper has limitations caused by 9 months of data collection, it shows the policy directions to reduce the emission of CO2 focusing on the house size and number of family members of each households. With the result of this research, lifestyle of the generation of dwellers should be investigated and the CO2 emission characteristics of other housing type as well for the data building for future policy making.
Journal of Korean Society of Occupational and Environmental Hygiene
Objectives: The objective of this study was to determine characteristics of workers' exposures to airborne total and hexavalent chromium by job title in electroplating processes. Methods: Total Cr was determined through a modified method based on NIOSH Method 7024. Airborne hexavalent Cr, Cr(VI), was sampled and extracted according to NIOSH Method 7600 and analyzed at 520 nm using an ion chromatograph/visible detector. Results: The geometric mean(GM) of total Cr concentrations from all factories was 11.2 ㎍/m 3 (GSD=4.9). The GM of Cr(VI) concentrations from all factories was 2.84 ㎍/m (GSD=5.2), and the concentrations among factories were significantly different (p<0.05). The Cr(VI) levels were lower than total Cr levels. Total Cr exposure levels were highest among buffing workers (21.6 ㎍/m 3), but Cr(VI) levels were highest among plating workers(4.15 ㎍/m 3). The concentrations of Cr(VI) and total Cr from plating tasks was highly correlated(r=0.91). Conclusions: In the electroplating industry, plating workers were mainly exposed to Cr(VI), but others were not. Oxidation-reduction states of Cr and job titles should be considered in the exposure or risk assessments of chrome electroplating factories.