Numerical Study of Stratified Flames Using Reynolds Averaged Navier Stokes Modeling (original) (raw)

ACS omega, 2022

Abstract

Reynolds averaged Navier Stokes technique was used to develop a validated numerical model for stratified flames. The validation was carried out with the experimental data of the non-swirl flames of the Cambridge dual annulus swirl burner. The RNG k–ε turbulence model along with the SG-35 skeletal chemical mechanism was found to give a good prediction of scalar and vector quantities while resulting in the reduction of computational time by 99.75% in comparison with that required for large eddy simulation techniques used in the literature. The effect of stratification at a constant input power, global equivalence ratio, and Reynolds number was examined. At stratification ratios (SRs = ϕin/ϕout) 1 and 2, intense burning, marked by the higher OH concentration, was observed close to the bluff body. Beyond SR = 2, the region of intense burning shifts downstream away from the bluff body. This is a result of the high equivalence ratio in the inner annulus, which is beyond the rich flammability limit of methane–air flames, and as a result, the primary flame region is shifted downstream after the mixtures from inner and outer annulus have mixed properly to produce a mixture with the equivalence ratio in the flammability limit. The maximum temperature was found to increase by 24.1% when the SR is increased from 1 to 2 and the combustion efficiency was found to significantly improve by 267%. The highest maximum temperature of 2249 K is observed for the mildly stratified flame at SR = 2. Beyond SR = 2, the maximum temperature decreases, while the combustion efficiency increases slightly.

Esmail M. A. Mokheimer hasn't uploaded this paper.

Let Esmail M. A. know you want this paper to be uploaded.

Ask for this paper to be uploaded.