Convergence in Engineering and Architectural Design Education: Mission-driven Integrated Design Studio (original) (raw)
Related papers
Building Design Construction of entire buildings Student projects at the Section for Building Design
2013
The Section for Building Design deals with construction of entire buildings considering relevant functional requirements and sustainable issues simultaneously. The goal is to provide quality of life including applicability, comfort, experience, sustainability, and safety. The research comprises design and operation of buildings concerning load-bearing structures, building physics, architecture, and safety with respect to fire and terror, and the process of design and methods for that for example digital building information models. A special attention is given to the development of building design methods for the early phases of the design process, where the most important decisions are made. All areas of research seek to implement their solutions in practise through dissemination and cooperation with clients, architects, consultants, contractors, and manufacturers, and in specific cases, a basis for acceptance is established for the authorities. This means that research, innovation, dissemination, and public sector consultancy constitutes an obvious flow of the sections work.
Homer AEI2006 Integrating Architectureand Structural Design in the Comprehensive Design Studio
For many architects, the expression of structure has been a primary factor in the generation of space and form. In fact, many architectural historians distinguish the two primary approaches to architecture as either space articulated by expressed structure (rationalist architecture) or space generated as a plastic expression divorced from the expression of its structure (formalist architecture). However, too often architects can treat structure as separate from the core values of architecture. Structural design is thought to be necessary only to ensure safety, not to enrich the expression of space. At the same time, many structural engineers can perceive the design of structure purely from a practical viewpoint without exploring its creative potential. This is fostered by professional education that many times separates architects and engineers at the university.
Aspects of the integral teaching of structures and architectural design
Structures and Architecture, 2019
ABTAT The structural design of uildings and other structures has changed signicantl oer the last 30 years. With the gradual introduction of computer methods of designing, and especially the erication of construction structures, the cooperation eteen the architect and the construction engineer has changed from a coexistent relationship into a dependent one. This means that modern computational techniques allow calculations of substantially more complex structures that work holistically and are not divided into individual structural elements. Consequently, the structural concept is becoming more and more a service, which is subordinate to architectural design and paradoxically means that the shape of the building no longer has a signicant effect on its structural performance. Another determining factor is the fact that with increasing demands on the thermal efciency of buildings, their structure tends to be entirely enclosed in an impermeable envelope that is as compact as possible. The importance of the structure is evidently diminishing.
Technical Reports are published for timely dissemination of research results and scientific work carried out at the Department of Civil Engineering (DCE) at Aalborg University. This medium allows publication of more detailed explanations and results than typically allowed in scientific journals. Technical Memoranda are produced to enable the preliminary dissemination of scientific work by the personnel of the DCE where such release is deemed to be appropriate. Documents of this kind may be incomplete or temporary versions of papers-or part of continuing work. This should be kept in mind when references are given to publications of this kind. Contract Reports are produced to report scientific work carried out under contract. Publications of this kind contain confidential matter and are reserved for the sponsors and the DCE. Therefore, Contract Reports are generally not available for public circulation. Lecture Notes contain material produced by the lecturers at the DCE for educational purposes. This may be scientific notes, lecture books, example problems or manuals for laboratory work, or computer programs developed at the DCE. Theses are monograms or collections of papers published to report the scientific work carried out at the DCE to obtain a degree as either PhD or Doctor of Technology. The thesis is publicly available after the defence of the degree. Latest News is published to enable rapid communication of information about scientific work carried out at the DCE. This includes the status of research projects, developments in the laboratories, information about collaborative work and recent research results.
INNOVATIONS FOR STRUCTURAL SYSTEM EDUCATION IN ARCHITECTURE
Structural systems, which play an important role in today's architectural education, have become an issue that is analyzed by mega structures using different disciplines in the process from the design stage to the construction stage. While design and structural system studies are performed together in practice, architecture students usually have difficulty in reflecting their learning from the structural system course into their design studio in architectural education. In this study, information about education method for " Structural System and Technologies I " course, carried out in the fourth semester (second class) in Department of Architecture in Gebze Technical University, was primarily given. Unlike previous teaching methods in this course scope, a structural system modeling to solve the given design problem was requested from the students during spring semester 2015. It was aimed to provide the students with an understanding of general design principles involving structural elements and learning about the necessity in which the structural system should be considered in conjunction with the architectural design, concluding with a two-week assignment. A survey was conducted among 55 architecture students in order to evaluate the outcomes of the assignment. According to the survey results, 61% of the students stated that function, form, and structural system affect one another. 20% of them stated that function, form, and structural system, respectively, have an order of importance in the design process. 9% of them stated that structural system determine form and function. 6% of them stated that form, function, and structural system, respectively, have an order of importance in the design process. Finally, 4% of them stated that their relations change depending on the condition. Innovative teaching method in this study is found to be successful because the students have experienced the importance of materials in structural system and learned how to integrate structural system course to architectural design studio. It is intended that this study will benefit architecture students and educators.
Teaching Structural Design in Civil Engineering Technology
1995
This paper is a description of a college course in structural design, which in this case serves as the capstone of the program in Civil Engineering Technology at the College of Staten Island (New York). Fourteen weeks of class lecture topics, activities, and assignments are delineated. Coverage includes building codes, loads calculation, structural behavior, and design of beams and columns. The course description also provides the purposes and requirements of a term project in structural design. The course received highly positive evaluations from participants, many of whom remarked on the success of course materials and the term project progressing in parallel throughout the semester. (BEW)
Architectural Design and Construction Education
EAAE
Individual cast concrete elements A workshop on the workability, optimisation and production of concrete EAAE no 45 Architectural Design and Construction Education-Experimentation towards Integration Preface As the second in a series of international workshops that studies the physical and aesthetic potential of the material concrete in architecture, a workshop was held at Technische Universität in Berlin in the period 8 th-13 th October 2007. The workshop took place in one of Peter Behren's AEG turbine halls, which now function as a concrete laboratory for the university's Fachgebiet Massivbau. Here 10 students of civil engineering from Technishe Universität in Berlin met with 10 students of architecture from the Aarhus School of Architecture, and cooperated in solving a common assignment. The metaphorical point of departure for the assignment was a contemporary interpretation of the Brandenburger Tor in an architectural, technical sense. The basic, classical architectural and static principle of the bearing and the borne-columns and beams were to be submitted to existing and future concrete concrete technological and form-related potentials. It was a hands on experience where the students created architecture by specifically sketching, developing and finally casting concrete elements in full scale. The result reflects the interdisciplinary effect of the workshop, namely the cooperation between engineers and architects. Static stability and the course of the forces has been expressed as architectural form. The workshop was arranged and completed in cooperation with Aalborg Portland Group as part of the research into concrete at the Aarhus School of Architecture. EAAE no 45 Architectural Design and Construction Education-Experimentation towards Integration Invocation Architecture is the poetic articulation of technology. Architecture is the... Poetic Articulation of Technology Lyrical Expression of Skill Elegiac Verbalisation of Knowledge Graceful Communication of Expertise Rhythmical Enunciation of Know-how Flowing Pronunciation of Machinery Architectural Context There are many instances of poetic articulations of technology in architecture from large to small. Here are three examples...
Architecture Abstracts: 4th Annual International Conference
2014
This abstract book includes all the summaries of the papers presented at the 4th Annual International Conference on Architecture, 7-10 July 2014, organized by the Sciences and Engineering Research Division of the Athens Institute for Education and Research. In total there were 80 papers and 85 presenters, coming from 23 different countries (Australia, Bulgaria, China, Cyprus, Finland, Iran, Israel, Italy, Jordan, Korea, Lebanon, Portugal, Russia, Slovakia, South Africa, Spain, Sweden, Taiwan, Thailand, Turkey, UAE, UK and USA). The conference was organized into XVII sessions that included areas of Space Making, Design, Buildings, Pedagogy, Materials and other related fields. As it is the publication policy of the Institute, the papers presented in this conference will be considered for publication in one of the books of ATINER.