High frequency modal identification on noisy high-speed camera data (original) (raw)
Related papers
Remote Sensing
Despite significant advances in the development of high-resolution digital cameras in the last couple of decades, their potential remains largely unexplored in the context of input-output modal identification. However, these remote sensors could greatly improve the efficacy of experimental dynamic characterisation of civil engineering structures. To this end, this study provides early evidence of the applicability of camera-based vibration monitoring systems in classical experimental modal analysis using an electromechanical shaker. A pseudo-random and sine chirp excitation is applied to a scaled model of a cable-stayed bridge at varying levels of intensity. The performance of vibration monitoring systems, consisting of a consumer-grade digital camera and two image processing algorithms, is analysed relative to that of a system based on accelerometry. A full set of modal parameters is considered in this process, including modal frequency, damping, mass and mode shapes. It is shown t...
Structure modal identification based on computer vision technology
2021
Mobile phones have the potential to become useful tool in structural modal identification. In this paper, shaking table test videos of a 10-story steel structure captured by mobile phone is processed using computer vision theory and then the modal parameters are identified. A signal processing method based on variational mode decomposition (VMD) is used to improve the accuracy of identification. Using optical flow algorithm, the vibration data is extracted from the video, and then the response of the structure is obtained from the vibration data of selected feature points. Then, the vibration data is processed by VMD and structural modal parameters (mode frequency and mode shapes) are identified using FFD. Finally, the identification results obtained from mobile phone and professional sensors are compared to verify feasibility and accuracy of the proposed modal identification method.
2021
Many civil engineering infrastructures including bridges and buildings have been constructed several years ago. They are facing increasing challenges due to climate change and exposed to various external loads such as earthquakes. Extensive research works have been carried out to enable structural and health monitoring (SHM). Modal identification is a crucial part of SHM. Conventionally, it has been accomplished by accelerometers mounted on the structure. Their use may be extremely accurate. However, only a few sensors is usually set up on the structure which may limit modal identification and SHM performance. Vision-based techniques gained increased acceptance as cheaper and easier solution to perform long-range vibration measurements. Video cameras offer the capacity to collect high-spatial resolution data from a distant scene of interest. Various image processing techniques have been developed to extract motion from subtle time changes in the image brightness. Commonly, these mot...
Mastering Complex Modes: A New Method for Real-Time Modal Identification of Vibrating Systems
arXiv (Cornell University), 2023
A novel algorithm for real-time modal identification in linear vibrating systems with complex modes is introduced, utilizing a combination of first order eigen-perturbation and second order separation techniques. In practical settings, structures with complex modes are frequently encountered and their presence often poses a challenge in accurately estimating the source signal in real-time. The proposed methodology addresses this issue by incorporating the right angle phase shift of the response in the sensor output and updating the second order statistics of the complex response through first order eigen-perturbation. Empirical evidence of the efficacy of the technique is demonstrated through numerical case studies and validation using various numerically modeled systems, as well as a standard ASCE-SHM benchmark problem with complex modes, highlighting the capability of the proposed method to achieve precise real-time modal property identification and online source separation with a minimal number of initially required batch data.
Experimental modal analysis using camera displacement measurements: a feasibility study
Sixth International Conference on Vibration Measurements by Laser Techniques: Advances and Applications, 2004
Recently, a mobile coordinate measurement machine consisting of three CCD cameras was expanded with dynamic measurement capabilities. The system is able to track three LEDs in three directions with a maximum sampling frequency of about 1000 Hz. This offers the possibility to use the measurements for dynamic system identification. To this aim, a vibrating structure is equipped with multiple lightweight infrared LEDs and excited by dynamic excitation sources. Transfer functions between force and displacements are estimated from which the modal parameters of the structure can be identified. The benefits of using the camera displacement measurement system is that information down to 0 Hz can be obtained, that mounting LEDs is much easier than installing traditional displacement transducers (LVDTs) and that the coordinates of the measurement points are also available from the measurements. In this paper a dynamic testing study is performed using a scale model of an airplane. Both LEDs and accelerometers are mounted on the structure allowing a comparison between displacement and acceleration transfer function modal analysis results. The main conclusion is that it is possible to successfully identify the modal parameters of the airplane scale model from the displacement measurements in the complete frequency range of the excitation.
Response-only modal identification of structures using strong motion data
Earthquake Engineering & Structural Dynamics, 2013
Dynamic characteristics of structuresviz. natural frequencies, damping ratios, and mode shapesare central to earthquake-resistant design. These values identified from field measurements are useful for model validation and health-monitoring. Most system identification methods require input excitations motions to be measured and the structural response; however, the true input motions are seldom recordable. For example, when soil-structure interaction effects are non-negligible, neither the free-field motions nor the recorded responses of the foundations may be assumed as 'input'. Even in the absence of soil-structure interaction, in many instances, the foundation responses are not recorded (or are recorded with a low signal-to-noise ratio). Unfortunately, existing output-only methods are limited to free vibration data, or weak stationary ambient excitations. However, it is well-known that the dynamic characteristics of most civil structures are amplitudedependent; thus, parameters identified from low-amplitude responses do not match well with those from strong excitations, which arguably are more pertinent to seismic design. In this study, we present a new identification method through which a structure's dynamic characteristics can be extracted using only seismic response (output) signals. In this method, first, the response signals' spatial time-frequency distributions are used for blindly identifying the classical mode shapes and the modal coordinate signals. Second, cross-relations among the modal coordinates are employed to determine the system's natural frequencies and damping ratios on the premise of linear behavior for the system. We use simulated (but realistic) data to verify the method, and also apply it to a real-life data set to demonstrate its utility.
Full-field FRF estimation from noisy high-speed-camera data using a dynamic substructuring approach
Mechanical Systems and Signal Processing, 2021
The use of a high-speed camera for dynamic measurements is becoming a compelling alternative to accelerometers and laser vibrometers. However, the estimated displacements from a high-speed camera generally exhibit relatively high levels of noise. This noise has proven to be problematic in the high-frequency range, where the amplitudes of the displacements are typically very small. Nevertheless, the mode shapes of the structure can be identified even in the frequency range where the noise is dominant, by using eigenvalues from a Least-Squares Complex Frequency identification on accelerometer measurements. The identified mode shapes from the Least-Squares Frequency-Domain method can then be used to estimate the full-field FRFs. However, the reconstruction of the FRFs from the identified modeshapes is not consistent in the high-frequency range. In this paper a novel methodology is proposed for an improved experimental estimation of full-field FRFs using a dynamic substructuring approach. The recently introduced System Equivalent Model Mixing is used to form a hybrid model from two different experimental models of the same system. The first model is the reconstructed full-field FRFs that contribute the full-field DoF set and the second model is the accelerometer measurements that provide accurate dynamic characteristics. Therefore, no numerical or analytical model is required for the expansion. The experimental case study demonstrates the increased accuracy of the estimated FRFs of the hybrid model, especially in the high-frequency range, when compared to existing methods.
Performance of Optical Structural Vibration Monitoring Systems in Experimental Modal Analysis
Sensors (Basel, Switzerland), 2021
Image-based optical vibration measurement is an attractive alternative to the conventional measurement of structural dynamics predominantly relying on accelerometry. Although various optical vibration monitoring systems are now readily available, their performance is currently not well defined, especially in the context of experimental modal analysis. To this end, this study provides some of the first evidence of the capability of optical vibration monitoring systems in modal identification using input–output measurements. A comparative study is conducted on a scaled model of a 3D building frame set in a laboratory environment. The dynamic response of the model to an impulse excitation from an instrumented hammer, and an initial displacement, is measured by means of five optical motion capture systems. These include commercial and open-source systems based on laser Doppler velocimetry, fiducial markers and marker-less pattern recognition. The performance of these systems is analysed...
Journal of Vibroengineering, 2016
A major trust of modal parameters identification (MPI) research in recent years has been based on using artificial and natural vibrations sources because vibration measurements can reflect the true dynamic behavior of a structure while analytical prediction methods, such as finite element models, are less accurate due to the numerous structural idealizations and uncertainties involved in the simulations. This paper presents a state-of-the-art review of the time-frequency techniques for modal parameters identification of civil structures from acquired dynamic signals as well as the factors that affect the estimation accuracy. Further, the latest signal processing techniques proposed since 2012 are also reviewed. These algorithms are worth being researched for MPI of large real-life structures because they provide good time-frequency resolution and noise-immunity.
Journal of Earthquake Engineering and Engineering Vibration, 2016
The viability of a complete structural characterization of civil structures is explored and discussed. In particular, the identification of modal (i.e. natural frequencies, damping ratios and modal shapes) and physical properties (i.e. mass and stiffness) using only the structure’s free decay response is studied. To accomplish this, modal analysis from free vibration response only (MAFVRO) and mass modification (MM) methodologies are engaged along with Wavelet based techniques for optimal signal processing and modal reconstruction. The methodologies are evaluated using simulated and experimental data. The simulated data are extracted from a simple elastic model of a 5 story shear building and from a more realistic nonlinear model of a RC frame structure. The experimental data are gathered from shake table test of a 2-story scaled shear building. Guidelines for the reconstruction procedure from the data are proposed as the quality of the identified properties is shown to be governed by adequate selection of the frequency bands and optimal modal shape reconstruction. Moreover, in cases where the structure has undergone damage, the proposed identification scheme can also be applied for preliminary assessment of structural health.