Modern Trends in Recycling Waste Thermoplastics and Their Prospective Applications: A Review (original) (raw)
Related papers
Thermoplastic Recycling: Properties, Modifications, and Applications
Polymer Recycling [Working Title]
The increasing rate of plastic waste generation coupled with undesirable disposal, especially in the urban areas, has resulted to environmental threat in the globe which has been attributed to legislation, poor biodegradability, economic growth, rural to urban migration, increase in consumption, and standard or cost of living. This chapter will focus on overview, properties of virgin and recycled thermoplastics, recycling techniques, and applications of different types of thermoplastic articles such as HDPE, LDPE, PVC, PET, and polypropylene (PP) with improved properties based on modifications using eco-friendly materials for sustainable applications in order to save human existence from the menace of environmental and economic issues.
Resources, Conservation & Recycling, 2021
Polymeric products such as plastics and rubbers are in widespread use, and the recycling of these polymeric materials has not kept pace with the increased production. There are serious environmental consequences to disposing of waste polymeric materials in landfills or incinerating them. Their low biodegradability makes it unpopular for both large and small industries to recycle them. This study reviews recycling strategies for waste thermoplastic and thermoset materials undertaken by industries and researchers. The primary objective is to review these techniques and identify those that can be applicable to the construction industry. There are three conclusions from this review: (1) Recycling of polymeric waste materials can be helpful to limit landfilled or incinerated waste plastic. (2) Proper selection of a recycling method for waste plastics and rubbers can effectively address the recycling problem without compromising the mechanical properties of the construction material. (3) The majority of the published articles in construction materials research have overlooked the importance of pretreatment of waste polymeric materials to ensure compatibility with construction materials. Accordingly, there is an urgent need for understanding the science of functionalization of polymers to be able to tune surface properties of the recycled granules for targeted applications. This paper highlights critical research needs to facilitate the recycling of thermosets and thermoplastics to promote resource conservation and sustainability.
Recycling of natural fibre thermoplastic compounds
2015
Plastics and polymer industry have gained a bad reputation regarding the environmental issues as being responsible of several problems especially climate, energy resources and landfills. That is why focus is switched to natural fibres as an alternative to synthetic fibres. This research studies the influence of recycling on injected moulded thermoplastic natural fibre reinforced parts regarding the thermal, thermo-mechanical behaviour and change in fibre content and shape. Two polypropylene compounds are investigated namely PP – sisal and PP – hemp compounds, where the two polypropylene matrices are modified with MAPP. Processing cycles proved to decrease the fibre content of both compounds where PP-sisal (PP-S) suffers a reduction of fibre content by 26.5% whereas the PP-hemp (PP-H) compound decreased by only 10.2% of the initial value. An increase of 7.2°C and 11.6°C in the Tg (Glass transition temperature) is recorded for the compound PP-S and PP-H respectively. This research has...
Recycling of waste from polymer materials: An overview of the recent works
Polymer recycling is a way to reduce environmental problems caused by polymeric waste accumulation generated from day-today applications of polymer materials such packaging and construction. The recycling of polymeric waste helps to conserve natural resource because the most of polymer materials are made from oil and gas. This paper reviews the recent progress on recycling of polymeric waste form some traditional polymers and their systems (blends and composites) such as polyethylene (PE), polypropylene (PP), and polystyrene (PS), and introduces the mechanical and chemical recycling concepts. In addition, the effect of mechanical recycling on properties including the mechanical, thermal, rheological and processing properties of the recycled materials is highlighted in the present paper.
Recycling, 2019
Polypropylene and polystyrene are petroleum-based thermoplastics which are commonly used and disposed of in the environment after their service life, leading to environmental degradation. There is a need to recycle polypropylene and polystyrene, but the effect of recycling on thermo-mechanical properties is not well understood. This study aims to determine thermo-mechanical properties of the recycled polypropylene and recycled polystyrene and compare them with corresponding virgin polypropylene and newly produced polystyrene (general purpose polystyrene 1540 and high impact polystyrene 7240). The study was carried out by preparing bar-shaped samples of recycled polypropylene, recycled polystyrene, general purpose polystyrene 1540, and high impact polystyrene 7240 by compression molding using a hot press and thermally characterizing them to determine glass transition temperature and melting temperature using differential scanning calorimetry. The changes in Young’s modulus, tensile s...
Changes in Mechanical and Rheological Properties of Recycled Thermoplastics
Quality of Life (Banja Luka) - APEIRON
Polymer materials have extremely wide application in various fields of technology and human needs (jobs, food industry, production of various packaging, furniture and household goods, Electrical and electronics, agriculture, chemical, automotive, aerospace and military industry and so on. This paper presents the results of changes in mechanical and rheological properties of recycled thermoplastics. The purpose is to show the polymer waste as raw material, or otherwise utilizing the material. Specific information will be given the possibility of forming a form to calculate the size observed through cycles of recycling, which may help in further research and analysis.
Recycled (Bio)Plastics and (Bio)Plastic Composites: A Trade Opportunity in a Green Future
Polymers
Today’s world is at the point where almost everyone realizes the usefulness of going green. Due to so-called global warming, there is an urgent need to find solutions to help the Earth and move towards a green future. Many worldwide events are focusing on the global technologies in plastics, bioplastic production, the recycling industry, and waste management where the goal is to turn plastic waste into a trade opportunity among the industrialists and manufacturers. The present work aims to review the recycling process via analyzing the recycling of thermoplastic, thermoset polymers, biopolymers, and their complex composite systems, such as fiber-reinforced polymers and nanocomposites. Moreover, it will be highlighted how the frame of the waste management, increasing the materials specificity, cleanliness, and a low level of collected material contamination will increase the potential recycling of plastics and bioplastics-based materials. At the same time, to have a real and approach...
Journal of Applied Polymer Science, 2017
As most thermoset material, phenolic molding compound (PMC) wastes are an environmental problem. Very few recycling solutions have been proposed so far for this type of material. A mechanical recycling method to valorize these materials is proposed in this work. It relies on the use of phenolic waste as filler in thermoplastic. Such phenolic filler can increase mechanical properties (tensile, flexural) of the matrix, and be used in substitution of traditional particulate fillers such as calcium carbonate or talc. In this study, several morphological parameters influencing the final mechanical properties of a PMC filled polypropylene micro-composite are studied, such as filler loading rate, particles size distribution of the filler, and interfacial adhesion between the filler and the matrix. Some structural parameters are also studied and linked with mechanical properties, such as dispersion of the filler and crystallinity of the matrix. Finally, the properties of PMC filled PP are compared with CaCO3 and talc filled PP.
Process- and material-induced heterogeneities in recycled thermoplastic composites
Journal of Thermoplastic Composite Materials
A novel recycling solution for thermoplastic composites (TPCs) was recently implemented. The processing steps comprise shredding of TPC offcuts to flakes of a few centimetres, melting and blending of the flakes in a low-shear mixer, extrusion of a molten mixed dough and subsequent compression moulding in a press. This material and process are similar to the compression moulding of long-fibre thermoplastics (LFTs) that have been in the market for decades, such as glass mat thermoplastics (GMT) or direct-LFT. However, the input material in this recycling route consists of multi-layered woven flakes, which is very different from the pellets or chopped rovings of other LFTs. Process- and material-induced heterogeneities such as fibre orientation, percolation, variation of fibre fraction, or fibre attrition may be different for this new material. The development of this recycling technology and future industrial applications require more confidence in the material and process. The object...