Optical properties of ionic liquid passivated CdSe/ZnS quantum dots dispersed in POC copolymer (original) (raw)
Related papers
Journal of Nanoparticle Research, 2013
In this work, we studied energetic and optical proprieties of a polyester-containing oxadiazole and carbazole units that we will indicate as POC. This polymer is characterized by high photoluminescence activity in the blue region of the visible spectrum, making it suitable for the development of efficient white-emitting organic light emission devices. Moreover, POC polymer has been combined with two red emitters InP/ZnS quantum dots (QDs) to obtain nanocomposites with wide emission spectra. The two types of QDs have different absorption wavelengths: 570 nm [InP/ZnS(570)] and 627 nm [InP/ZnS(627)] and were inserted in the polymer at different concentrations. The optical properties of the nanocomposites have been investigated and compared to the ones of the pure polymer. Both spectral and time resolved fluorescence measurements show an efficient energy transfer from the polymer to QDs, resulting in white-emitting nanocomposites.
Enhancing the device performance of a blue light-emitting copolymer using CdSe/ZnS quantum dots
Journal of Polymer Science Part B: Polymer Physics, 2014
An alternating triarylamine-functionalized fluorenebased copolymer synthesized using a Suzuki-Miyaura crosscoupling procedure is used as blue emitting layer in polymer light-emitting diodes (PLEDs). Subsequently, the effects of CdSe/ZnS quantum dots (QDs) on the optoelectronic properties of the copolymer are investigated. Therefore, CdSe/ZnS QDs are embedded into the copolymer matrix and hybrid PLEDs are fabricated. The devices comprised of CdSe/ZnS QDs reveal enhanced performances, yielding about 3.4 times more lumi-nous efficiency than that of the device without QDs. Further enhancement is achieved by using electron transport layer; the luminous efficiency rose from 0.065 to 1.740 cd A 21 for the hybrid PLEDs, corresponding to a superb 27-fold intensification of the efficiency.
Nanocomposites of POC and quantum dots
2012
In this work, we studied energetic and optical proprieties of a polyester-containing oxadiazole and carbazole units that we will indicate as POC. This polymer is characterized by high photoluminescence activity in the blue region of the visible spectrum, making it suitable for the development of efficient white-emitting organic light emission devices. Moreover, POC polymer has been combined with two red emitters InP/ZnS quantum dots (QDs) to obtain nanocomposites with wide emission spectra. The two types of QDs have different absorption wavelengths: 570 nm [InP/ZnS(570)] and 627 nm [InP/ZnS(627)] and were inserted in the polymer at different concentrations. The optical properties of the nanocomposites have been investigated and compared to the ones of the pure polymer. Both spectral and time resolved fluorescence measurements show an efficient energy transfer from the polymer to QDs, resulting in white-emitting nanocomposites.
Role of the Polymer Matrix on the Photoluminescence of Embedded CdSe Quantum Dots
Chemphyschem : a European journal of chemical physics and physical chemistry, 2015
The photoluminescence (PL) of CdSe quantum dots (QDs) that form stable nanocomposites with polymer liquid crystals (LCs) as smectic C hydrogen-bonded homopolymers from a family of poly[4-(n-acryloyloxyalkyloxy)benzoic acids] is reported. The matrix that results from the combination of these units with methoxyphenyl benzoate and cholesterol-containing units has a cholesteric structure. The exciton PL band of QDs in the smectic matrix is redshifted with respect to QDs in solution, whereas a blueshift is observed with the cholesteric matrix. The PL lifetimes and quantum yield in cholesteric nanocomposites are higher than those in smectic ones. This is interpreted in terms of a higher order of the smectic matrix in comparison to the cholesteric one. CdSe QDs in the ordered smectic matrix demonstrate a splitting of the exciton PL band and an enhancement of the photoinduced differential transmission. These results reveal the effects of the structure of polymer LC matrices on the optical p...
ACS Nano, 2009
To combine the optical properties of CdSe@ZnS quantum dots (QDs) with the electrical properties of semiconducting polymers, we prepared QD/polymer hybrids by grafting a block copolymer (BCP) containing thiol-anchoring moieties (poly(para-methyl triphenylamine-b-cysteamine acrylamide)) onto the surfaces of QDs through the ligand exchange procedure. The prepared QD/polymer hybrids possess improved processability such as enhanced solubility in various organic solvents as well as the film formation properties along with the improved colloidal stability derived from the grafted polymer shells. We also demonstrated light-emitting diodes based on QD/polymer hybrids, exhibiting the improved device performance (i.e., 3-fold increase in the external quantum efficiency) compared with the devices prepared by pristine (unmodified) QDs. KEYWORDS: hybrid materials · quantum dot(s) · light-emitting device(s) ARTICLE www.
Optics Express, 2010
We propose a highly efficient hybrid light-emitting device (LED) with a single active layer where CdSe/ZnS quantum dots (QDs) are dispersed as a guest material in a conjugated polymer (co-polymer) matrix used for a host material. In our structure, the QDs act on light-emitting chromophores by trapping the migrating excitons in the co-polymer matrix via Förster energy transfer, and improve the charge balance within the copolymer by trapping the injected electron carriers. Experimental results show that the electroluminescent properties highly depend on the doping density of the QDs within the co-polymer matrix, where the luminance as well as the external current efficiency are initially enhanced with increasing the concentration of the dispersed QDs in the co-polymer solution, and then such properties are degraded due to aggregation of the QDs. We can get the maximum brightness of 9,088 cd/m 2 and the maximum external current efficiency of 7.5 cd/A in mixing ratio of the QDs by 1.0 wt%. The external current efficiency is enhanced by over 15 times and the turn-on voltage is reduced in comparison with the corresponding values for a reference device that uses only a co-polymer as an active layer.
Materials, 2014
Polymeric ionic liquids (PILs) are an interesting class of polyelectrolytes, merging peculiar physical-chemical features of ionic liquids with the flexibility, mechanical stability and processability typical of polymers. The combination of PILs with colloidal semiconducting nanocrystals leads to novel nanocomposite materials with high potential for batteries and solar cells. We report the synthesis and properties of a hybrid nanocomposite made of colloidal luminescent CdSe nanocrystals incorporated in a novel ex situ synthesized imidazolium-based PIL, namely, either a poly(N-vinyl-3-butylimidazolium hexafluorophosphate) or a homologous PIL functionalized with a thiol end-group exhibiting a chemical affinity with the nanocrystal
Molecules, 2021
Nanocomposites based on CdSe or CdSe/ZnS quantum dots (QDs) and poly(methyl methacrylate) (PMMA) of different molecular weights and functionality were synthesized by ligand exchange of oleic acid with RAFT-based PMMA. The successful ligand exchange was confirmed by dynamic light scattering in combination with the approach “macromolecules—ghosts” and transmission electron microscopy. Comparative study of mono- and telechelics of PMMA revealed the similarities and differences in their behavior in formation of complexes with QDs and the optical properties of the corresponding nanocomposites. Telechelics exhibited higher efficiency in the complex formation and seemed to be promising candidates for the construction of devices based on QDs and polymer matrix for optical applications.
Synthesis and photoluminescence spectra of CdS and CdS/ZnO doped PVK nanocomposite films
Materials Science-Poland
Organic/inorganic hybrid materials consisting of quantum dots and conjugate polymers are important for the application in light emitting devices. In the present work, we have studied the effect of CdS and CdS/ZnO nanoparticle addition on the structure and fluorescence properties of spin coated PVK (poly(N-vinyl carbozole)) nanocomposite films. CdS nanoparticles were synthesized by simple co-precipitation technique and ZnO shell was grown on the CdS nanoparticles by simple wet chemical approach. The nanoparticles and the hybrid nanocomposites have been characterized by using XRD, SEM, FT-IR, optical absorption and fluorescence spectroscopic techniques. The absorption peak for pure PVK remains at 345.5 nm accompanied with minor hump ~480 nm resulting from the incorporation of nanoparticles. It has been observed that the addition of nanoparticles to the hybrid material results in the enhancement of fluorescence intensity at 410 nm to 450 nm spectral regions. These results are important...