Analysis and Design of Reflectarray Antennas Based on Delay Lines: A Filter Perspective (original) (raw)
The analysis and design of reflectarray (RA) antennas based in delay lines is introduced for the first time from a filter perspective. To this purpose, each unit-cell of the RA is considered as a network composed of two ports, one being the delay line and the other one the free-space. This approach allows to borrow the coupling matrix formalism from filter theory and apply it to design unit-cells exhibiting broadband operation together with very sharp frequency responses. The concept is demonstrated with the aid of planar printed unit-cells coupled to substrate integrated waveguides (SIWs) through slots, a configuration that offers significant advantages to shape its frequency response while providing relatively low loss. With the aim of validation, a third order filter structure integrated in SIW-based unit-cells has been experimentally tested using the waveguide simulator technique, at a center frequency of 9 GHz. Measurements demonstrate a high-quality linear phase variation and range, and large frequency selectivity together with broadband response for the element of about 18%. The experimental results show the feasibility of this approach for the design of broadband reflectarray antennas exhibiting sharp gain responses. To illustrate the concept, a medium size reflectarray has been theoretically designed using the proposed unit cell at 9 GHz, showing a directive beam with 35.8 dB gain, sharp gain selectivity over 18 dB, and confirms the wide band operation with 20.3% bandwidth for a 3 dB gain variation. INDEX TERMS Broadband antennas, delay-line elements, filter theory, gain selectivity, reflectarray antennas, substrate integrated waveguide.
Related papers
A Compact Single Layer Reflectarray Antenna Based on Circular Delay-Lines for X-band Applications
Radioengineering, 2018
This paper presents a compact single layer reflectarray antenna based on a diagonally notched square patch and a pair of circular delay-lines, for X-band applications. The length and width of circular delay-lines are varied and optimized to attain a linear phase range of more than 600º. The effect of incident angle in TE and TM modes at 0º, 15º and 30º is studied, which offers stable angular phase range. The hybrid Finite Element Boundary Integral (FEBI) method is used for simulation of the whole reflectarray system comprising of 27 × 27 elements and being fabricated on a low cost FR-4 laminate. The measured gain of 24.5 dBi with aperture efficiency of 49.5% is achieved at 10 GHz. The proposed design provides the measured 1-dB gain bandwidth of 12.5% and 3-dB gain bandwidth of 34%. The simulated and measured side-lobe-levels and cross polarizations are less than-25 dB and-40 dB, respectively.
Bandwidth Improvement of Reflectarray Antennas Using Closely Spaced Elements
Progress In Electromagnetics Research C, 2011
A bandwidth improvement method in reflectarray antennas by using closely space elements, i.e., unit-cell sizes smaller than λ/2, has been investigated both numerically and experimentally in this paper. A new definition of phase error has been introduced to analyze the broadband mechanism of closely spaced phasing elements. Through full wave EM simulations, it is revealed that closely spaced elements achieve a smaller phase error over the band. Based on these theoretical studies two Ka-band reflectarrays were fabricated and their performance was measured across the frequency range of 30 to 34 GHz. It is demonstrated that the reflectarray designed with closely spaced elements achieves a notable improvement in gain bandwidth performance.
Wideband reflectarray antenna using true-time delay lines
IET Seminar Digests, 2007
Reflectarray antennas show a narrow bandwidth as a result of two factors: the narrow bandwidth of the radiating elements and the differential spatial phase delay. The last factor is specially important in large aperture reflectarrays. In this contribution, the bandwidth of reflectarrays is increased significantly by the inclusion of radiating elements with very linear response which allows true-time delay (TTD) without limiting the phase. These elements are based on patches aperture-coupled to delay lines allowing a wide range of phase with several cycles of 360º. An example of wideband reflectarray antenna in X-band is shown. Two identicallysized reflectarrays have been designed using different phase distributions to collimate the same pencil beam. In the first case the phase distribution is truncated to 360º and in the second case is expanded to at least 3 cycles of phase delay. The gain patterns of these reflectarrays are compared demonstrating a considerable improvement in the bandwidth when TTD elements are used.
A single layer delay-lines based reflectarray for X-band applications
IEICE Electronics Express, 2018
This paper presents a single-layer delay-lines based reflectarray for X-band applications. The proposed design contains an octagonal-shaped patch with T-shape delay-lines. A phase range of 500°is realized by using T-shape delay-lines. A stable phase range is achieved for TE and TM modes at 0°, 15°and 30°incident angles. An equivalent circuit model is used to investigate the resonant property of the proposed reflectarray unit element. A 21 × 21 elements reflectarray is designed, fabricated and measured on an FR-4 substrate. The proposed design provides 1-dB gain bandwidth of 18.5% and 3-dB gain bandwidth of 30%. Measured gain of 26 dBi at 10 GHz with aperture efficiency of 65% is obtained. The proposed reflectarray configuration have side-lobe-levels less than −25 dB.
A Single-Layer Broadband Reflectarray Antenna by Using Quasi-spiral Phase Delay Line
IEEE Antennas and Wireless Propagation Letters, 2015
A novel broadband unit-cell is proposed in this paper. This new cell element consists of three coupled circular rings where four quasi-spiral delay lines are connected to the outer ring to provide the required phase shift. The spiral shape of the delay lines exhibits more than 1000 o of phase swing. The cross polarization level of the presented element is considerably improved compared to previous designs with a similar phasing mechanism. The capability of operating in linearly or circularly polarized incident wave is an important advantage of the proposed cell. In other words, depending on polarization of the feed antenna, the present reflectarray can operate in vertical, horizontal or circular polarization. Finally a moderate size reflectarray, 27×27 cm 2 , is designed and fabricated based on the mentioned element. The measured results showed about 16.5% of 1 dB gain bandwidth. The antenna gain at 8.5 GHz is 26.4 dB which is equivalent to 59.2% efficiency. Also, the measured sidelobe level and cross polarization of this antenna are about-20 dB and-25 dB, respectively.
Modified Phasing Element for Broadband Reflectarray Antennas
Progress In Electromagnetics Research C, 2017
New phasing element for a wideband microstrip reflectarray is presented. It is formed by a phase-delay line attached to a circular ring loaded with a circular disc microstrip. The structure is enclosed by a circular ring element with a pair of gaps. It is shown that the new phasing element offers a wider bandwidth with an increased phasing range that is useful in reflectarrays phase compensation procedure. Full wave EM simulations are carried out. Good agreement exists between simulation results and measurements by using waveguide simulator method. The mutual coupling effect for a realistic reflectarray configuration with non-identical cells is accounted for by using the perturbation technique.
Comparison and Analysis of Unit-Cell Environment Behavior of Reflectarray Antenna
2016
The reflectarray combines much of the simplicity of the reflector antenna with the performance of the array antenna. This paper presents an analysis and design of unit cell of reflectarray antenna using a square patch and square loop radiating elements and the steps taken in the design of a reflectarray unit cell operates in X -Band (8-12 GHz) at the center frequency of 10 GHz. The result of an analysis is generated from the Computer CST Microwave Studio using the approach of Floquet. This model takes into account a mutual coupling between elements, and is an efficient way to accurately characterize reflectarray elements.
Loading Preview
Sorry, preview is currently unavailable. You can download the paper by clicking the button above.