Synthesis and application of modified magnetic nanoparticles for removal of Cyanide from aqueous solutions (original) (raw)
Related papers
Synthesis of Polymer-Based Magnetic Nanocomposite for Multi-Pollutants Removal from Water
Polymers, 2021
A magnetic polymer-based nanocomposite was fabricated by the modification of an Fe3O4/SiO2 magnetic composite with polypyrrole (PPy) via co-precipitation polymerization to form PPy/Fe3O4/SiO2 for the removal of Congo red dye (CR) and hexavalent chromium Cr(VI) ions from water. The nanocomposite was characterized using various techniques including X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), vibration sample magnetometer, and thermogravimetric analysis (TGA). The results confirm the successful fabrication of the nanocomposite in the size of nanometers. The effect of different conditions such as the contact time, adsorbent dosage, solution pH, and initial concentration on the adsorption process was investigated. The adsorption isotherm suggested monolayer adsorption of both contaminants over the PPy/Fe3O4/SiO2 nanocomposite following a Langmuir isotherm, with maximum adsorption of 361 and 298 mg.g−1 for CR dye and Cr(VI),...
Journal of Magnetism and Magnetic Materials, 2015
The object of this study was to evaluate the removal efficiency of sunset yellow (SY) anionic dye from aqueous solutions by using new surface modified iron oxide magnetic nanoparticles (MNPs). Pure Fe 3 O 4 MNPs were synthesized and then functionalized by aminopropyltriethoxysilane (APTES), through a chemical precipitation method. Characterization of the prepared MNP adsorbents was performed by furrier transform infrared (FT-IR), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and transmission electron microscopy (TEM). According to XRD and TEM results, average size of the magnetic Fe 3 O 4 /APTES NPs was estimated to be around 12 nm. The prepared magnetic adsorbent can be well dispersed in the water and easily separated magnetically from the medium after loaded with adsorbate. In the adsorption process, the effect of main experimental parameters such as pH of dye solution, initial concentration of SY dye, reaction time, and amount of MNP adsorbent on the removal of SY were studied and optimized. The small amount of this adsorbent (10 mg) is applicable for the removal of high concentrations of SY dye in reasonable time (17 min), at pH 3.1. Additionally, the adsorption studies show that the Langmuir model is a suitable model to explain the experimental data with high correlation coefficient.
Magnetic nanoparticles as an effective adsorbent for removal of fluoride–a review
MOJ Ecology & Environmental Sciences, 2018
Fluoride concentration more than 1.5mg/L in drinking water can create various health issues and can lead to various human diseases. Adsorption is considered as one of the best technique for fluoride removal. Poor adsorption capacities, long contact time, high dosage, extremely low or high pH are the major drawbacks of various adsorption processes. In recent years several surface modified magnetic nanoparticles paves the way for effective removal of fluoride from water. The review fundamentally assesses the potential use of different surface modified magnetic nanoparticles (MNPs) for the effective removal of fluoride from contaminated water. High fluoride adsorption capacity of 91.04 mg/g at pH value of normal water is seen in case of Ce-Ti@Fe3O4 magnetic nanoparticle whereas the adsorption capacity of Zr based MNP is as high as 158 mg/g at very low water pH. Interestingly, Fe3O4 encapsulated Zr (IV)-poly (acrylamide) magnetic nanomaterials exhibit very high fluoride adsorption capacity of 124.5 mg/g in normal water. Though the magnetic assistance makes the whole separation process easy in using magnetic material adsorbent, there are still challenges like reusability, toxicity regarding the material selection, environmental impact etc.
Current advancements of magnetic nanoparticles in adsorption and degradation of organic pollutants
Environmental science and pollution research international, 2017
Nanotechnology is a fast-emerging field and has received applications in almost every field of life. Exploration of new synthetic technologies for size and shape control of nanomaterials is getting immense consideration owing to their exceptional properties and applications. Magnetic nanoparticles (MNPs) are among the most important group of nanoparticles thanks to their diverse applications in medical, electronic, environmental, and industrial sectors. There have been numerous synthetic routes of MNPs including thermal decomposition, co-precipitation, microemulsion, microwave assisted, chemical vapor deposition, combustion synthesis, and laser pyrolysis synthesis. The synthesized MNPs have been successfully applied in medical fields for therapy, bioimaging, drug delivery, and so on. Among environmental aspects, there has been great intimidation of organic pollutants in air and water. Utilization of various wastes as adsorbents has removed 80 to 99.9% of pollutants from contaminated...
Engineered magnetic nanoparticles as efficient sorbents for wastewater treatment: a review
Materials Research Innovations, 2017
With the rapid advancement of economics, world's water resources have been adversely affected by various contaminants like microbes, organic dyes and heavy metal ions. Eventually, this is the sole reason for number of environmental problems. Researchers have always been paying much attention towards water treatment and utilisation of magnetic nanoparticles (MNPs) as nanosorbents for the same. Moreover, MNPs based immobilisation technology for enhanced and efficient removal proves to be an innovative research point. This is due to unique properties of nanoparticles like extremely small size, high surface area to volume ratio, surface modifiability and great biocompatibility. This review outlines the interesting pathways of removing water impurities. It also gives a compendious overview of the research progress achieved in the very field of wastewater treatment using MNPs, along with some important methods of their synthesis.
Environmental progress & sustainable energy, 2015
Sodium dodecyl sulfate-coated magnetic nanoparticles were utilized as the inexpensive and effective adsorbents to remove neutral red and methylene blue (two cationic dyes) from aqueous solutions. Factors affecting adsorption, including the amounts of adsorbent and surfactant, pH, and contact time, were investigated by an orthogonal central composite design. The kinetic processes of the dyes adsorption were described by applying the pseudo-first-order and the pseudo-second-order models. It was found that the pseudosecond-order kinetic equation described the data of dye adsorption with a good correlation (R 2 > 0.999) which indicated a chemisorptions mechanism. The extent of dye removal enhanced with increasing initial dye concentration. The adsorption of dyes at concentrations of 30-70 mg/L reached to equilibrium within 35 min. The adsorption data were represented by Langmuir isotherm model. In addition, the maximum monolayer capacities, (q max), of methylene blue and neutral red onto the modified nanoparticles were found to be as high as 294.12 and 416.67 (mg/g), respectively. These values are higher than the adsorption capacities of some other adsorbents that have recently been published in the literature. In addition, the required contact time to achieve equilibrium was reduced by the modified nanoparticles. V
Arabian Journal of Chemistry, 2011
In this research, the potential of Fe 3 O 4 magnetic nanoparticles (MNPs) for efficient removal of methyl violet as a cationic dye from aqueous solutions was investigated. For this purpose, Fe 3 O 4 MNPs were synthesized via chemical precipitation method. The synthesized MNPs were characterized by XRD and SEM techniques. To remove methyl violet, the surface of the MNPs was modified with sodium dodecyl sulfate (SDS) as an anionic surfactant. Also, the various parameters affecting dye removal were investigated and optimized. The kinetic studies for methyl violet adsorption showed rapid sorption dynamics by a second-order kinetic model, suggesting chemisorption mechanism. Dye adsorption equilibrium data were fitted well to the Langmuir isotherm rather than Freundlich isotherm. The maximum monolayer capacity, (q max), was calculated from the Langmuir as 416.7 mg g À1. The results show that, SDS-coated magnetic nanoparticles, can be used as a cheap and efficient adsorbent for removal of cationic dyes from aqueous solutions.
AIJR Publisher in Proceedings of First Conference for Engineering Sciences and Technology (CEST-2018), September 25-27,, 2018
Water contamination by synthetic dyes is considered as a serious environmental issue, globally. In this study, the adsorptive removal of a very toxic cationic dye, methylene blue (MB), from aqueous solution was investigated using spinel ferrite, CoFe1.9Cr0.1O4 (CFC), magnetic nanoparticles as an adsorbent. CoFe1.9Cr0.1O4 powder was successfully synthesized via a sol-gel process and characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM) techniques. The effect of various experimental parameters on MB removal including; contact time, initial dye concentration, adsorbent dosage, solution pH and temperature were investigated. The results revealed that about 94 % of MB was removed under the optimal operational conditions. The adsorption kinetics showed that adsorption data were better described by pseudo-second-order model (PSO). In addition, the adsorption isotherms follow Langmuir isotherm model and the maximum monolayer adsorption capacity was found to be 11.41 mg/g. The calculated thermodynamic parameters (i.e., ∆G o , ∆H o , ∆S o) indicate that the proposed adsorption process of methylene blue onto CoFe1.9Cr0.1O4 nanoparticles is exothermic and spontaneous in nature. The results suggest that the synthesized magnetic nanoparticles (CFC) can be employed for the removal of toxic cationic synthetic dyes from wastewater.
USE OF MAGNETIC NANOPARTICLES IN WASTE WATER TREATMENT A REVIEW
Now days the water treatment became the most worried topic all over the world. Increase in population and industrialization resulting into the contamination of the water (reservoir and ground water). Therefore it is necessary to purify and recycle the industrial as well as the municipal waste water. From last decade the use of nanoparticles for water treatment have gained special attention due to its property being highly profitable as an adsorbents and for filtration purpose. Further the type Magnetic Nanoparticles (MNPs) also possesses the properties like high surface area and being the super magnetic in nature. The magnetic property of separation is useful by applying external magnetic field to them. Thus the MNPs are also being used for removal of toxic heavy metals/elements like cations, natural organic matter, biological contaminants, and organic pollutants, nitrites, fluoride and arsenic from the contaminated water. The MNPs can be synthesized by various methods like chemical route, mechanical grinding, etc. among the available different technologies, adsorption by MNPs is one of the best due to its easy handling, low cost an high efficiency. The environmental fate and toxicity of a material are critical issues in materials selection and design for water treatment.