Estimation of Driver’s Danger Level when Accessing the Center Console for Safe Driving (original) (raw)
Related papers
Human Computer Inte raction in the Car
2010
Cars have become complex interactive systems. Mechanical controls and electrical systems are transformed to the digital realm. It is common that drivers operate a vehicle and, at the same time, interact with a variety of devices and applications. Texting while driving, looking up an address for the navigation system, and taking a phone call are just some common examples that add value for the driver, but also increase the risk of driving. Novel interaction technologies create many opportunities for designing useful and attractive in-car user interfaces. With technologies that assist the user in driving, such as assistive cruise control and lane keeping, the user interface is essential to the way people perceive the driving experience. New means for user interface development and interaction design are required as the number of factors influencing the design space for automotive user interfaces is increasing. In comparison to other domains, a trial and error approach while the product is already in the market is not acceptable as the cost of failure may be fatal. User interface design in the automotive domain is relevant across many areas ranging from primary driving control, to assisted functions, to navigation, information services, entertainment and games.
Positioning study of driver's hands in certain areas of the steering wheel
MATEC Web of Conferences, 2018
The aim of this paper is to analyze driver's hands coordinates on the steering wheel for an optimal and safe driving experience. A good coordination of the driver's action on the controls is the result of a comfortable position that leads to an optimal reaction while driving. The presented study implies using a thermal imaging camera for analysing palms temperature changes in the contact area with the steering wheel. The resulting data shows that the optimal driving position of drivers' hands is 0° and 180° associating the steering wheel with and trigonometric circle.
EVALUATION OF PHYSICAL MEASURES OF STEERING AND BRAKING RESPONSE FOR IN-VEHICLE WARNING SYSTEMS
A concern of all ergonomic analysis and design is to help ensure a safe environment for employees working in various trades and professions. This can include systems to warn users about the incorrect usage of equipment or processes. This paper summarizes an investigation in to developing methodologies to measure these responses quantitatively. Twelve participants were asked to drive a simulated vehicle with electromyography (EMG) electrodes placed on four different muscle groups of the upper arm and lower leg. Subjects were distracted to generate a lane departure, during which the auditory, haptic, or combination of auditory and haptic, warning was provided to capture the driver's attention. The response of the participant to the given warning was measured by recording the muscle activity using EMG. The results documented significant root-mean-square (RMS) of EMG amplitudes during steering and braking activity in response to the warning condition. In addition, this study describes methodology involved in measuring these responses. The result of this study can be useful to find the effectiveness of warning systems such as correct reactions, or possibly the presence of startle/panic responses.
Real-Time Safety Automobile Driver System
International Journal of Computer Applications, 2015
The Driver Fatigue Detection (DFD) plays an important role in automobile safety and security. Driver fatigue is one of the leading causes of traffic accidents. Long-vehicles driving are needed to keep drivers under monitoring due to fatigue and more accidents. This monitoring include : eyes blinking , face expressions. Without these monitoring, the accidents is increasing and caused the driver death. Driver's tiredness and drowsiness are the major causes of traffic accidents on road. This proposed prototype is monitor the driver's fatigue level and analyze fatigue reason's (tiredness, drowse or a drunken) and real-time DFD online. The proposed model depend on eye gestures (eyes blinking) and sensors such as an infrared camera (camera remotely) to detect driver expression. These sensors directly pointed towards the driver's face. This technology is not interactive with an outside driving situation .The system consist of Mesh network equipped Zigbee protocol , sensors and Xbee tag. The system analyze the variation of driver's eyes movement rate. According that parameters , the system can specify the level of driver's fatigue based on the response signals and alert driver. Practically. This system is robust, reliable, and accurate to detect fatigue levels.
Automobile Sensor Based Safety System
International Journal of Global Technology Initiatives, 2019
A normal automobile when parked for a few minutes during daytime becomes hot. When a person enters the automobile, it is so hot that he opens the door and waits for a few minutes before getting in. This hot air and such a situationare harmful and suffocating for an infant, children’s, disables and even for adults.Hence it is essential for us to not ignore it and to overcome it and find a remedy or if possible, eliminate the problem itself. Because such situation can be very harmful and leads to hospitalization and even death. In order to overcome such harmful and injurious situation, we are designing an alert and an exhaust system to deal with this problem. Basically, we are designing a system which can detect the harmful scenario by using sensors (NTC thermistor, frequency sensor, smoke detector) which is controlled by Arduino and safety measures are activated accordingly and alert the person regarding the harmful situation. After the safety measures are activated, the window moves...
Operator's workplace design takes a priority to be developed in order to reach the highest possible level of Quality, Safety and productivity. Continual improvement of the workplace is yield from studies carried out on different approaches, each approach shall keep into consideration many aspects, in this research; the results will be used for feeding the productivity and safety aspects with valuable and dependent input data using relatively simple engineering solutions. This research is made based on literature of the accumulated knowledge from diverse fields in which different studies and analysis are made to provide the necessary input for Human Centered Design process, adopting the-state-of-the-art technologies and methodologies used for data collection and analysis for Human behavior inside the dedicated workplace. Better understanding of the operator's behaviors and its change according to the mental and physical workloads inside the workplace will lead to optimal designs for higher productivity and safer operation.
Hand gestures to control infotainment equipment in cars
2014 IEEE Intelligent Vehicles Symposium Proceedings, 2014
Controlling multiple devices while driving steals drivers' attention from the road and is becoming the cause of accidents in 1 out of 3 cases. Many research efforts are being dedicated to design, manufacture and test Human-Machine Interfaces that allow operating car devices without distracting the drivers' attention. A complete system for controlling the infotainment equipment through hand gestures is explained in this paper. The system works with a visible-infrared camera mounted on the ceiling of the car and pointing to the shift-stick area, and is based in a combination of some new and some wellknown computer vision algorithms. The system has been tested by 23 volunteers on a car simulator and a real vehicle and the results show that the users slightly prefer this system to an equivalent one based on a touch-screen interface.
Predicting proximity of driver head and thorax to the steering wheel
1998
The distance between the driver and the steeringwheel airbag module at the time of deployment has been identified as an important factor affecting the frequency and severity of airbag-induced injuries. Pre-crash positioning may influence the clearance at the time of deployment. Data from in-vehicle studies of driving posture were analyzed to determine the clearance between the steering wheel and the driver's head and chest in normal driving postures. Driving postures of over fourhundred men and women were recorded in twenty-two different vehicle conditions representing a wide range of seat heights, steering-wheel-to-pedal distances, and seat cushion angles. The data were used to generate predictive statistical models of the distribution of clearances between the driver's torso and the steering wheel. The findings have implications for vehicle design and airbag-injury countermeasures.
Active vehicle safety system design based on driver characteristics and behaviour
International Journal of Vehicle Safety, 2009
In the development of driver adaptive and context aware active safety applications, driver-vehicle interaction signals offer excellent opportunities for advanced system design, yet limited progress has been realised. The implementation of driver adaptive and context aware systems requires longer time windows to analyse the current status of the driver and/or traffic situation ahead. In this study, a summary of systems that can be realised based on the long-term analysis of driver-vehicle interaction signals is presented. These signals are readily obtained by using Controller Area Network (CAN) Bus via On Board Diagnostic System (OBD) II port that can be utilised at low cost. Based on the analysis results, quantitative metrics are suggested that can be used in many ways, with two prospects considered here: