Monitoring and Control System of Parallel Loads Electricity Consumption Based on IOT (original) (raw)
Related papers
IOT Based Smart Power Metering
In India, plug load devices in building sectors are consuming close to 40 percent of the total electricity consumption. Though the share of plug load in building energy is increasing, very few studies exist on the plug level energy usage and consumption. In order to address the growing energy use of miscellaneous and electronic load (e.g. water heater), some measures need to be taken. Hence identifying needs, this project focuses on designing the devices that have built-in capability to measure and report the energy use or receive control input over the network. This study will help in creating energy awareness devices. Current sensor measures the current flowing through device then controller performs necessary calculations on the data and puts that data on the internet. By measuring current and voltage, we can analyze energy consumption, make the world smarter place and make better decisions using Internet of Things.
IOT based Electrical Energy Monitoring in a Domestic Appliances
International journal for research in applied science and engineering technology ijraset, 2020
The energy monitors are a entry to the inner energy operating of our home. By mistreatment web of Things (IOTs) technology we are able to study good home power management. Taking advantage of the IOTs technology and therefore the facility of web site and mobile, this platform are facilitate to the facilitate users to manage house connected electrical appliances and residential services and supply a much better plan for power management settings supported the user's behaviors and habits. during this project we tend to use controller with current sensors to observe the consumption of the ability daily base that consumed quantity of power was displayed serial monitor endlessly and additionally we tend to provided GSM for causation SMS for each 5minutes endlessly. In our system we tend to are ready to see the recent log of our past power consumption list by mistreatment IOT server based mostly info it store the all the data concerning what proportion quantity of power is consumed daily. It additionally offer mechanically generated bill for each 5 minutes and this was displayed within the IOT SERVER. And additionally it absolutely was send as SMS for that client. Keywords: Arduino Uno (Microcontroller), Current Sensor, GSM Modem, Load and Software (Arduino IDE and Embedded c). I. INTRODUCTION Internet of Things (IOT) gathers helpful information by group action sensing and communication capabilities between completely different devices. Advancements during this field have opened a good vary of potentialities within the style of future sensible homes. These devices square measure substantially helpful in observation and analyzing numerous physical and environmental parameters remotely. IOT enabled electricity consumption devices to observe the number of electricity consumed by home appliances can facilitate people to grasp and analyze the number of electricity consumed by every appliance reception. As devices is connected wirelessly and information is remotely accessed, these devices square measure gaining quality chop-chop. As electricity consumption is increasing day by day, the price of it is also increasing thus; shoppers have an interest in reducing their consumption in electricity. There square measure devices obtainable in market that helps in observation and saving energy consumption in home appliances. These devices facilitate in observation the number of electricity consumed by completely different devices. In area design is meant to scale back power consumption. In India, the traditional electrical meters provided by the electricity suppliers live the facility consumption of a building for a month and supply the reading of a month to the shoppers. During this case, client isn't able to observe and monitor the electricity consumption per day per appliances in his building/home. By victimization energy meters, the electricity consumption of various appliances is monitored severally and controlled if needed. This can facilitate the buyer to spot the main consumption of electricity with relevancy any appliance and may take acceptable measures which will successively facilitate the atmosphere. Victimization associate electricity meter that might live the facility consumption of individual appliances on an individual basis, will facilitate shoppers management electricity consumption. A angularity Bee management module is employed in that comprises a circuit for sensing the present. This detected module sends back current that's measured associated sends a message if there's an overload. sensible electricity meters are developed however has disadvantages like high price, installation issue etc. we've self-addressed these problems during this work by implementing a coffee price and fewer complicated style of associate electricity display that gives machine-controlled load energy reading over. The device enforced features a Wi-Fi module embedded that uses wireless network to send the facility consumption information to the cloud server for storage and more observation client will retrieve the information keep within the cloud server employing a laptop or sensible phone over net. There square measure many strategies developed for observation electricity consumption in family appliances. Activity pattern is enabled for appliances reception in shoppers behavior is assessed and looked into supported surveys in a number of the studies in literature used family appliances to observe the electricity consumption.
In this system, the energy meter reading is calculated and uploaded to server through IOT using controller. Thereby, customer and officer can open the website and read the data to know the cost of electric bill. The power to home can be controlled through the website by EB officer like ON/OFF based on payment of electric bill. Current sensor is used to read the current drawn by the load from the power supply. Voltage sensor is used to identify the voltage drop and apply voltage to the load from power supply. Relay is used to control the power ON and OFF to the home. Using the voltage and current sensor the power consumption is identified by the ARDUINO microcontroller and these data are uploaded to the server or website through IOT modem. Fig 1: Block Diagram Fig 2: Project Hardware
IJERT-Real Time Power Consumption Monitoring and Control using IoT
International Journal of Engineering Research and Technology (IJERT), 2020
https://www.ijert.org/real-time-power-consumption-monitoring-and-control-using-iot https://www.ijert.org/research/real-time-power-consumption-monitoring-and-control-using-iot-IJERTCONV8IS12012.pdf In present days energy theft and power demand is very common problem in many countries due to increase in consumers each and every day. Current energy billing in India cause errors and also time and labour consuming. There is no way to know the proper and detail information about the energy meter. So, problems and errors in existing system is overcome by proposed system using PIC microcontroller, NodeMCU, RFID tag, GSM module. In the proposed system at regular interval measure the amount of current and power consumed by the customer and the electric bill will be generated based on the their amount of power usage every month. Also eliminates the manual meter reading and providing real time data, useful for balancing electric loads and reducing power cuts. This system detect and control the energy meter from the power theft, if unauthorized activities detected an alert message will be sent through GSM module and power will cut from the server directly using relay. To pay the electric bill on time prepaid system is introduced. Objective of the system is making it possible to use power resources more efficiently.
Monitoring, Controlling & Conserving of Electrical Energy Using IOT
INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT
Energy consumption refers to the amount of energy consumed by an individual or organization which has been taken for granted in daily life by consumers especially at home.A circuit is designed, to take care of electrical energy consumption which helps the consumers to focus on the extra charges incurred due to minor changes in slab categories which affect the consumer’s bill severely[1]. This system utilizes a sensor module that is connected with ARDUINO along with GSM, ESP 8266, and energy meter to measure the power consumption at the home[2].The main aim of this paper is to make consumers aware of the power consumption and to control the excess power consumption, by using a IoT Based Electrical Energy Consumptıon Live Monitoring & Controlling System.The power consumption data is collected and stored in to IoT cloud services[3]. Daily usage is updated to the consumer periodically through a mobile application which helps to reduce over usage of power.
Improvements in Iot-Based Monitoring Of Energy Use
The design and implementation of an IoT-based Intelligent Electricity Consumption Warning System are discussed in this study. The technology is designed to offer in-home and industrial settings real-time monitoring and management of power use. Microcontroller, LCD, IOT module, current sensor, relay module, load lamp, and lamp holder are some of the parts that the system consists of. Using a current sensor to measure electricity usage, the system then transmits that data to the microcontroller, which processes and displays it on the LCD panel. Via a user-friendly interface, the IOT module provides remote system monitoring and control.
A Review On Iot Based Energy Monitoring And Controlling System
2016
Nowadays, electricity consumption has become one of the basic needs in every sector. Thus to improve the efficiency of all electrical appliances and to reduce wastage of electricity is one of the challenges faced by the world. The objective is to develop load monitoring and controlling system for electric appliances to reduce energy consumption and carbon emission in buildings through fine management of energy usage in an efficient way. This paper presents a review of monitoring and controlling methods for electric loads in commercial and residential buildings, by comparing different methods of implementation of this technology.
Design and fabrication of an IoT-based smart electrical meter for residential energy management
The Indonesian Journal of Electrical Engineering and Computer Science (IJEECS), 2023
Transparency in electricity measurement and efficient use of electricity are issues of concern to households. Electricity customers want to have confidence in their utility company's electricity meters installed at their houses. This study designs and constructs an internet of things (IoT)-based smart electric meter to measure electricity and remotely control domestic appliances. This device can monitor, calculate electricity bills and remotely control the appliances via the internet; electrical quantities are displayed in real-time on the Blynk app, liquid crystal display (LCD) screen and Google Sheet. The device is also capable of emailing the electricity user. The proposed system is designed and developed based on ESP32, a LCD, a PZEM 004T, four relays and a DC source. The results show that the device works stably and the device's error is less than 5%. This research makes it possible for users to conveniently monitor their power consumption while enhancing their energy-saving awareness.
IoT based Home Automation System for Electricity Usage
One of the important scientific discovery of all time is of electricity. Electricity has many uses in our day to day life and provides comfort to people. The existing system for Electricity meter reading has many drawbacks such as real time data is not available, huge human resource requirement, difficulty in construction etc. This research proposes an IOT based system to overcome drawbacks and provide additional benefits. The proposed system uses Arduino microcontroller, to read the no of units consumed by electrical appliances. These data is than send to a remote server using Ethernet shield. At the user end, an android application is created which allows the user to fetch data in real time and represent it graphically. In an effort to overcome the energy crisis, these systems send an SMS to the user when his/her home electricity usage crosses a threshold. To notify the user about his daily electricity usage a notification will be sent to the android application every day. The above system has been designed to overcome drawbacks of the existing system, ease of accessing real time data and to reduce energy crisis.
Effective Power Consumption Monitoring of Smart meter through IoT
IOP Conference Series: Materials Science and Engineering, 2020
Now a day’s electricity consumption in residential homes day by day is increasing. For verification and keep monitoring is very critical task because we have to go physically to take the meter readings in meter existing room. Well it is essential for a consumer because according to the electricity consumed the amount will be charged. We can automate the framework or system by checking the energy meter readings over the web. Our proposed system utilizes microcontroller with energy meter to track the electricity power consumed. With using of GSM module we can transmit the consumed units along with amount charged to the web portal so that consumer can monitor the data over the web. This allows the consumers can check the cost charged and power consumed units online by utilizing a simple web application. Therefore the consumers can monitor the energy meter readings very easily along with the cost and also consumers can check the bill amount online itself. FOTA(Firmware Over-The-Air) opt...