Numerical Investigation of Droplet-Based Heavy-Ion Generation (original) (raw)
Related papers
Studies of the Plasma Droplet Accelerator Scheme
IEEE Transactions on Nuclear Science, 2000
In the plasma droplet accelerator scheme, proposed by R. Palmer, a sequence of liquid micro-spheres generated by a jet printer are ionized by an incoming intense laser. The hope is that the micro-spheres now acting as conducting balls will allow efficient coupling of the incoming laser radiation into an accelerating mode. Motivated by this we have carried out 2D, particle simulations in order to answer some of the plasma physics questions hitherto unaddressed. In particular we find that at least for laser intensities exceeding vo/c=0.03 (1013w/cm2 for a CO2 laser), the incident laser light is rather efficiently absorbed in a hot electron distribution. Up to 70% of the incident energy can be absorbed by these electrons which rapidly expand and fill the vacuum space between the microspheres with a low density plasma. These results indicate that it is advisable to stay clear of plasma formation and thus put on an upper limit on the maximum surface fields that can be tolerated in the droplet-accelerator scheme.
Plasma Sources Science and Technology
We present the results of a joint experimental and theoretical study of plasma expansion arising from Nd:YAG laser ablation (laser wavelength λ = 1.064 µm) of tin microdroplets in the context of EUV lithography. Measurements of the ion energy distribution reveal a near-plateau in the distribution for kinetic energies in the range 0.03 − 1 keV and a peak near 2 keV followed by a sharp fall-off in the distribution for energies above 2 keV. Charge-state resolved measurements attribute this peak to the existence of peaks centered near 2 keV in the Sn 3+ − Sn 8+ ion energy distributions. To better understand the physical processes governing the shape of the ion energy distribution, we have modelled the laser-droplet interaction and subsequent plasma expansion using two-dimensional radiation hydrodynamic simulations. We find excellent agreement between the simulated ion energy distribution and the measurements both in terms of the shape of the distribution and the absolute number of detected ions. We attribute a peak in the distribution near 2 keV to a quasi-spherical expanding shell formed at early times in the expansion.
Ion acceleration by intense, few-cycle laser pulses with nanodroplets
Physics of Plasmas, 2015
The energy distribution of electrons and ions emerging from the interaction of a few-cycle Gaussian laser pulse with spherical nanoclusters is investigated with the aim of determining prospects for accelerating ions in this regime. It is found that the direct conversion of laser energy into dense attosecond electron nanobunches results in rapid charge separation and early onset of Coulomb-explosion-dominated ion dynamics. The ion core of the cluster starts to expand soon after the laser has crossed the droplet, the fastest ions attaining 10 s of MeV at relativistic intensities. The current investigation should serve as a guide for contemporary experiments, i.e., using state-of-the-art few-cycle ultraintense lasers and nanoclusters of solid density. V
Characterization of laser-driven proton acceleration from water microdroplets
Scientific Reports
We report on a proton acceleration experiment in which high-intensity laser pulses with a wavelength of 0.4 μm and with varying temporal intensity contrast have been used to irradiate water droplets of 20 μm diameter. Such droplets are a reliable and easy-to-implement type of target for proton acceleration experiments with the potential to be used at very high repetition rates. We have investigated the influence of the laser’s angle of incidence by moving the droplet along the laser polarization axis. This position, which is coupled with the angle of incidence, has a crucial impact on the maximum proton energy. Central irradiation leads to an inefficient coupling of the laser energy into hot electrons, resulting in a low maximum proton energy. The introduction of a controlled pre-pulse produces an enhancement of hot electron generation in this geometry and therefore higher proton energies. However, two-dimensional particle-in-cell simulations support our experimental results confirm...
Simulation of droplet heating and desolvation in an inductively coupled plasma — Part I
Spectrochimica Acta Part B-atomic Spectroscopy, 2001
A numerical model is developed to consider for the first time droplet coalescence along with transport, heating and desolvation in an argon inductively coupled plasma (Ar ICP). The direct simulation Monte Carlo (DSMC) method and the Ashgriz-Poo model are used, respectively, to compute droplet-droplet interactions and to determine the outcome of droplet collisions. Molecular dynamics (MD) simulations support the use of the Ashgriz-Poo coalescence model for small droplet coalescence. Simulations predict spatial maps of droplet number and mass densities within an Ar ICP for a conventional nebulizer-spray chamber arrangement, a direct injection high efficiency nebulizer (DIHEN), and a large bore DIHEN (LB-DIHEN). The primary findings are: (1) even at 1500 W, the collisions of the droplets in the plasma lead primarily to coalescence, particularly for direct aerosol injection; (2) the importance of coalescence in a spray simulation exhibits a complex relationship with the gas temperature and droplet size; (3) DIHEN droplets penetrate further into the Ar ICP when coalescence is considered; and (4) droplets from a spray chamber or the LB-DIHEN coalesce less frequently than those from a DIHEN. The implications of these predictions in spectrochemical analysis in ICP spectrometry are discussed. ᮊ
Spectrochimica Acta Part B-atomic Spectroscopy, 2003
A numerical model is developed to consider for the first time droplet coalescence along with transport, heating and desolvation in an argon inductively coupled plasma (Ar ICP). The direct simulation Monte Carlo (DSMC) method and the Ashgriz-Poo model are used, respectively, to compute droplet-droplet interactions and to determine the outcome of droplet collisions. Molecular dynamics (MD) simulations support the use of the Ashgriz-Poo coalescence model for small droplet coalescence. Simulations predict spatial maps of droplet number and mass densities within an Ar ICP for a conventional nebulizer-spray chamber arrangement, a direct injection high efficiency nebulizer (DIHEN), and a large bore DIHEN (LB-DIHEN). The primary findings are: (1) even at 1500 W, the collisions of the droplets in the plasma lead primarily to coalescence, particularly for direct aerosol injection; (2) the importance of coalescence in a spray simulation exhibits a complex relationship with the gas temperature and droplet size; (3) DIHEN droplets penetrate further into the Ar ICP when coalescence is considered; and (4) droplets from a spray chamber or the LB-DIHEN coalesce less frequently than those from a DIHEN. The implications of these predictions in spectrochemical analysis in ICP spectrometry are discussed. ᮊ
X-ray study of microdroplet plasma formation under the action of superintense laser radiation
Jetp Letters, 2003
We have measured the X-ray emission spectra of a plasma generated by laser radiation with an intensity above 1019W/cm2 and a pulse duration of 30 fs acting upon an argon jet target with a large abundance of micron-sized clusters. The time variation of the X-ray yield from ions of various multiplicities, calculated within the framework of a nonstationary kinetic model, shows a good qualitative agreement with the experimental time-integrated spectrum.
High-energy ion generation by short laser pulses
Plasma Physics Reports, 2004
This paper reviews the many recent advances at the Center for Ultrafast Optical Science (CUOS) at the University of Michigan in multi-MeV ion beam generation from the interaction of short laser pulses focused onto thin foil targets at intensities ranging from 10 17 to 10 19 W/cm 2 . Ion beam characteristics were studied by changing the laser intensity, laser wavelength, target material, and by depositing a well-absorbed coating. We manipulated the proton beam divergence using shaped targets and observed nuclear transformation induced by high-energy protons and deuterons. Qualitative theoretical approaches and fully relativistic two-dimensional particle-in-cell simulations modeled energetic ion generation. Comparison with experiments sheds light on ion energy spectra for multi-species plasma, the dependences of ion-energy on preplasma scale length and solid density plasma thickness, and laser-triggered isotope yield. Theoretical predictions are also made with the aim of studying ion generation for high-power lasers with the energies expected in the near future, and for the relativistic intensity table-top laser, a prototype of which is already in operation at CUOS in the limits of severalcycle pulse duration and a single-wavelength spot size. © 2004 MAIK "Nauk a/ Interperiodica".
Generation of Mie size microdroplet aerosols with applications in laser-driven fusion experiments
Review of Scientific Instruments, 2009
We have developed a tunable source of Mie scale microdroplet aerosols that can be used for the generation of energetic ions. To demonstrate this potential, a terawatt Ti: Al 2 O 3 laser focused to 2 ϫ 10 19 W / cm 2 was used to irradiate heavy water ͑D 2 O͒ aerosols composed of micron-scale droplets. Energetic deuterium ions, which were generated in the laser-droplet interaction, produced deuterium-deuterium fusion with approximately 2 ϫ 10 3 fusion neutrons measured per joule of incident laser energy.