Design of a Temperature and Humidity Monitoring System in Broiler Farms Using Internet of Things-Based Thingspeak (original) (raw)
Related papers
Design of Temperature Monitoring and Control System in Smart Hen Coop Based on Internet of Things
Journal of Information System, Technology and Engineering, 2024
Design of Temperature Monitoring and Control System in Smart Hen Coop Based on Internet of Things Every temperature error detected by the system would be notified to users by the Blynk application, and the system would attempt to stabilize the temperature in hen coop with a lamp and fan. Notification from the Blynk application is set to stop until the temperature returns to an ideal. The Blynk application is equipped with a reset button to reset the chicken age counter. This system used temperature and humidity sensors DHT22 to sense the temperature, which the data from the sensor output read by Arduino Uno. The data that Arduino Uno reads is sent to NodeMCU. Afterward, NodeMCU sent the data to the Blynk server; therefore, the Blynk application displayed the temperature and humidity data on the Blynk dashboard. This system is expected to facilitate users/breeders in monitoring the temperature in the hen coop. Therefore, users/breeders do not need to worry about chickens dying due to heat or cold stress. The waterfall method is used in this design of the system. This system was tested in a 70 x 70 x 130 cm sized hen coop and entirely tested the system each minute for 35 minutes.
A Control and Monitoring System for Poultry Farming Using Internet of Things Technology
As time go on the world gradually changes to include all life technology standards. The work in this paper is a practical example of using (Internet of things) in the development of work in the poultry farms field. where we adopt the Rainbow system to analyze the required data and give the analyst accurate statistical values instead of manual statistics that need time. This is based on the presence of reception guides to measure (House temperature, Humidity, Outside temperature, Ventilation , Prop mixing ventilation , Air inlet , Negative pressure) , which are periodically inspected during the poultry maturity cycle (35 to 40 day). After the ovulation data is sent from the sensors to the routers are recorded on the program used to be treated as high-level data accurate and comparable to the analysis of these devices located within a single network are recorded ratios at the end of each session that give tables and graphs that are placed cycle course to facilitate dealing with Poultry during its incubation period and evade the mistakes of the farmers while taking the values by hand. CCS Concepts • Information systems➝Database management system engines • Computing methodologies➝Massively parallel and high-performance simulations.
SMART POULTRY FARMING USING INTERNET OF THINGS (IoT
Laspotech Journal of Scientific, Engineering and Technology Research - Vol. 2, Issue. 1. , 2023
In tropical areas like Nigeria, some forms of ventilation are needed to moderate the temperature and ensure adequate supply of oxygen, removal of carbon dioxide and other waste gases and dust from poultry houses. In this work, the focus is on the automatic control of the environmental parameters of a poultry pen, employing sensors and using internet of things (IoT). The temperature and humidity were monitored and controlled remotely with the help of sensor modules connected to a microcontroller. Sensor values were acquired using a Wi-Fi module and then uploaded to the cloud. The cooling fans, together with light bulbs, were switched on or off, without any human intervention, based on the threshold values set for these devices.
Design and Implementation of an IoT-Based Weather Monitoring System for Enhanced Chicken Farm
International Journal of Innovative Science and Research Technology(IJISRT), 2024
The goal of the project is to address the difficulties faced by chicken farmers in properly controlling the environmental conditions of their farms through the design and implementation of an Internet of Things-based weather monitoring system. It investigates how Internet of Things (IoT) technology can be used to remotely monitor and regulate weather conditions that are critical to the health and productivity of chicken. The overall goals of the initiative are to maximize production efficiency, enhance animal welfare, and improve management methods on poultry farms. Chicken farms are extremely vulnerable to changes in temperature, humidity, and air quality, among other environmental factors. Unpredictable or unfavorable weather patterns can cause stress, lower egg production, and higher bird mortality rates. The goal of the project is to create an affordable, user-friendly weather monitoring system that will enable farmers to keep an eye on, control, and maintain the perfect environment for their chickens. The project's primary design focus is on placing wireless sensors all throughout the chicken farm to continuously monitor important meteorological factors. Through a userfriendly online or mobile application, farmers can obtain real-time weather data and receive alerts thanks to the sensors' connection to a central IoT network. In order to adapt the heating, cooling, and ventilation systems to variations in the weather, the system also includes automated actuators. The Internet of Things (IoT)-based weather monitoring system showed considerable advantages for chicken farmers after undergoing extensive testing and deployment.
IoT Based Smart Monitoring System for Efficient Poultry Farming
Webology, 2022
This paper presents a smart system using Internet of things (IoT) for monitoring and controlling environmental conditions of poultry farming. Environmental parameters such as temperature, humidity, and air quality in a poultry house which are vital for the survival of poultry birds were monitored in order to adequately nurture poultry birds, reduce mortality rate and improve production. The system utilizes ESP32 microcontroller which has embedded Wi-Fi function, DHT11 temperature and humidity sensor, the PIR motion detector sensor, and MQ135 gas detector sensor. In addition, a buzzer was added to alert the farmer in the event of an intruder, while the integrated Wi-Fi unit would send a message to the farmer. Furthermore, the proposed system controls the brightness of a lamp inside the poultry house to either increase or reduce its temperature. This work which is a prototype, was implemented in a small poultry house. All the tests carried out illustrated that the designed system is s...
Smart Chicken Poultry Farm Using IoT Techniques
International Journal of New Technology and Research, 2021
This research aims to design a monitoring system for temperature, humidity, and harmful gas levels in chicken coops using an internet of things (IoT) based system. The system design uses a DHT 22 sensor to detect temperature and humidity and an MQ-135 sensor to monitor the quality of ammonia gas (NH3). The designed system is also expected to control the fan and lights to maintain the cage's stable temperature and humidity. The data from the two sensors are connected to the internet network with the ESP8266 module and the Arduino Mega 2560 microcontroller. The data is then displayed on the LCD and sent to the smartphone application for remote notification via an 800L GSM SIM. Based on the test data carried out later, it can be concluded whether this IOT-based control system provides convenience for farmers to reduce mortality and delays in chicken growth. If successful, the data can be accessed in real-time using a smartphone application.
Computers and Electronics in Agriculture, 2020
Animal welfare is a major concern these days, as well as the factors that have impact on animal productivity. Constant monitoring of environmental parameters such as temperature, humidity, levels of ammonia and luminosity is crucial because these variables directly impact poultry performance and welfare. Along these lines, it is necessary to look for solutions that allow the monitoring of these variables in a practical, reliable and cheap way. In the agribusiness, the scenario for the IoT (Internet of Things) is very promising, because it has emerged to fill this gap and deliver sensed data, widely increasing the connectivity of the devices. Therefore, this paper describes a low cost, hardware and software proposal for monitoring these environmental parameters in poultry farms. In addition, experiments were done to compare the proposed prototype with commercial devices. The measured variables showed a correlation above 0.90 between the sensors used in the prototype and the calibrated equipment, also having the cost of only 13% of that of the conventional equipment. The prototype displayed favorable results, indicating that its implementation is viable.
The Design of A Telegram IoT-based Chicken Coop Monitoring and Controlling System
2020
Less ideal chicken coop condition is one reason for the low productivity of chickens in Indonesia. Based on this condition, breeders need monitoring and control devices that can be used easily anywhere and anytime. In this study, the monitoring and control devices based on the Internet of Things (IoT) were successfully designed using the ESP8266 microcontroller. The monitoring system used a DHT11 temperature sensor while the controller used a bulb and fan as the actuator. Monitoring data and control commands were displayed via Telegram. Coop testing was carried out with three different treatments-the light was on, the fan was on, and both were on-resulting in temperature and humidity measurement data ranging from 24–32 oC and 61–78%, respectively. Therefore, this monitoring and control device can prevent the conditions of the chicken coop that are ideal less so that chickens' productivity increases. DOI: http://dx.doi.org/10.17977/um024v5i22020p056
An IoT Smart Broiler Farming Model for Low Income Farmers
International Journal of Recent Contributions from Engineering, Science & IT (iJES)
The coming of Internet of things (IoT) brings opportunities for the deploying of wireless sensor networks. One area of deployment is smart poultry farming to improve the quality and security of chicken varieties that include broilers. The quality of broilers produced is dependent on the environment in which the broilers are kept. In addition, the revenue of the farmer is guaranteed if theft of stock is prevented. The current methods farmers use are labour intensive and time consuming as they are manual. Leveraging the features of IoT and sensors can help to monitor the environment and ensure adverse conditions are reported for farmers to take action before they harm the livestock. Incorporating intruder detection when monitoring conditions in the environment can also prevent stock theft and that can increase the income obtained by farmers. For such a system to be widely adopted by low income farmers, the cost should be low compared commercially available climate control systems that are meant for commercial farmers. The system should also provide ease of use for less technically skilled farmers, reduce the time taken by farmers to take action in controlling theft and conditions in the environment and be accessible from any location other than the broiler house. In this paper, we propose a low-cost model that can be used to monitor conditions in the environment of a broiler house and send the values to the farmer in real-time. The proposed model is based on open source microcontrollers, ZigBee protocol, GSM network, mobile applications and cloud computing.
IJERT-A witted Management of Poultry Farm using IoT
International Journal of Engineering Research and Technology (IJERT), 2020
https://www.ijert.org/a-witted-management-of-poultry-farm-using-iot https://www.ijert.org/research/a-witted-management-of-poultry-farm-using-iot-IJERTCONV8IS15021.pdf Poultry is one of the most important growing economic segments of agricultural sector in India today. Nowadays because of standardized farming management and good manufacturing practices, chicken production in the world has been increasing gradually. In contemporary world automation plays a vital role and concept of Internet of Things (IoT) is also emerging very fast, the re is an approach to convert traditional systems into automated systems. The project focuses on automation of poultry farm using IoT technology to perform various management related things. The environmental factors which affect the health of chicken such as temperature, humidity, light and Ammonia gas are monitored and the manual jobs like food feeding, water supply system, cleanliness are managed. Monitoring of chicks as per cycle is done hence giving an alert to the owner. Weight of the chicken is measured for quality production. If all these parameters are maintained, the production and quality of chicken increases0.