Model based prediction of nanostructured thin film morphology in an aerosol chemical vapor deposition process (original) (raw)
Related papers
Modeling of Aerosol Spray Characteristics for Synthesis of Mixed-Oxide Nanocomposite Sensor Film
A model is developed of aerosol synthesis of mixed metal oxide nanocomposite film for sensor applications. The synthesis technique involves atomization of a solution of mixed salts in water, spraying of solution droplets, droplet deposition on a heated substrate, evaporation and chemical reaction to produce the mixed oxides, and film growth. The precise control of oxide nanoparticle size distribution and inter-particle spacing in the film is crucial to achieving high sensitivity. These in turn largely depend on the droplet characteristics prior to impingement on the substrate. This paper focuses on development of a model to describe the atomization and spray processes before the film growth. Specifically, a mathematical model is developed utilizing Computational Fluid Dynamics solution of the equations governing the transport of atomized droplets from the nozzle to predict droplet characteristics in flight. The predictions include spatial distribution of droplet size and concentration, and the effect on these characteristics of swirling inlet flow at the spray nozzle.
Modeling of aerosol spray characteristics for synthesis of sensor thin film from solution
Applied Mathematical Modelling, 2013
A model is developed of aerosol spray for synthesis of sensor film from solution. The synthesis technique considered involves atomization of a solution of mixed salts in methanol, spraying of solution droplets, droplet deposition on a heated substrate, evaporation and chemical reaction to produce mixed oxides, and subsequent film growth. The precise control of oxide nanoparticle size distribution and inter-particle spacing in the film is crucial to achieving high sensitivity. These in turn largely depend on the droplet characteristics prior to impingement on the substrate. This paper focuses on the development of a model to describe the atomization and spray processes prior to the film growth. Specifically, a mathematical model is developed utilizing computational fluid dynamics solution of the equations governing the transport of atomized droplets from the nozzle to the substrate in order to predict droplet characteristics in flight. The predictions include spatial distribution of droplet size and concentration, and the effect on these characteristics of swirling inlet flow at the spray nozzle.
Aerosol self-assembly of nanoparticle films: growth dynamics and resulting 3D structure
Fourth International Conference on Smart Materials and Nanotechnology in Engineering, 2013
In this study, aerosol deposition of nanoparticles on flat surfaces has been investigated by Langevin dynamics (LD) accounting for Brownian's diffusion and a fix translational velocity. The particles are assumed to drop one at a time and had a monodisperse size distribution. The detailed morphology of the nanoparticle films was investigated as a function of Pe number, the ratio between Brownian and translational displacement for different structural constrains. The porosity was reduced with increasing Pe number from the diffusion to ballistic deposition limit. It was found that the simulation constrains have a substantial impact on the resulting film structural properties. This was attributed to the multi-scale porosity of these aerosol-deposited films. Downloaded From: http://proceedings.spiedigitallibrary.org/ on 01/26/2015 Terms of Use: http://spiedl.org/terms Proc. of SPIE Vol. 8793 879320-2 Downloaded From: http://proceedings.spiedigitallibrary.org/ on 01/26/2015 Terms of Use: http://spiedl.org/terms
Modeling of aerosol deposition of titania thin films
Materials Chemistry and Physics, 2000
The size-controlled TiO 2 particles are usually employed in semiconductor devices, catalysis and photo-catalysis, adsorption and optical technology. In this work, the kinetics of the aerosol process involving the precursor tetraisopropyl orthotitanate (TPT) and water as reactants kept in supercritical conditions (using CO 2 as solvent) and a detailed description of the fluid dynamic variables coupled with the statistical distribution of the particles inside the reactor are investigated. A turbulent diffusive flow is forced into the reactor to guarantee a complete conversion of the reactants and the production of small diameter particles. Furthermore, the particle formation can be well represented by means of the general dynamic equation (GDE). To allow a coupling between the solution of the fluid dynamic fields and the representation of the particle evolution within the reactor, the method of moments was applied to GDE to determine the most important statistical variables of a particle.
Materials Sciences and Applications, 2015
The deposition of metal oxide films using Spray Pyrolysis Technique (SPT) is investigated through mathematical and physical modeling. A comprehensive model is developed in the processes including atomization, spray, evaporation, chemical reaction and deposition. The predicted results including particle size and film thickness are compared with the experimental data obtained in a complementary study. The predicted film thickness is in a good agreement with the measurements when the temperature is high enough for the chemical reaction to proceed. The model also adequately predicts the size distribution when the nanocrystals are well-structured at controlled temperature and concentration.
J. Mater. Chem. A, 2015
Time resolved analysis of a thin film has allowed, for the first time, analysis of how thin film growth occurs and changes over time by aerosol assisted CVD. This method has also allowed tuning of the materials' functional properties. In this report a hydrophobic and highly photocatalytic TiO 2 /SnO 2 system is studied, which exhibits surface segregation of SnO 2 and thus the novel formation of a natural hetero-junction charge transfer system. The time resolved samples were investigated by a variety of methods. The films were characterised by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and Ultraviolet-visible absorption spectroscopy (UV-vis). Functional properties were investigated by photo-activity measurements and water contact angles before and after UV irradiation. The generation of representative samples at different times during the deposition sequence permitted changes in crystal structure, relative concentrations of atoms, and surface morphology to be linked intrinsically to changes in functional properties.
Controlling factors of film-thickness in improved aerosol deposition method
Journal of the Ceramic Society of Japan, 2009
To understand the controlling factor of film thickness in aerosol deposition method (ADM), the deposition apparatus was improved at first and the effect of pretreatment of raw barium titanate powder was studied. A developed aerosol generator where the carrier gas was separated from the aerosol generating gas was effective to avoid the agglomeration of powders during the deposition. Two dimensional scanning of the substrate decreased the film-thickness distribution caused by the imhomogeneity of deposition rate in a line-type nozzle. Effect of pretreatments of raw powders, including sieving, drying, planetary ball milling and heating was examined, respectively. There was an optimum rotational velocity of planetary milling to increase the film thickness, indicating that adequate agglomeration of raw powders enhance the film deposition. The film thickness decreased as the heating temperature increased. The heating strengthened the agglomeration of raw powders which restricted the film deposition because the kinetic energy of particles in the aerosol was consumed to break the agglomerations rather than making film. Weakly agglomerated powders with optimum size enhanced the film thickness in ADM.
Deposition layers formed by a turbulent aerosol flow of micron and sub-micron particles
Powder Technology, 2001
The particle deposition layers formed by a turbulent aerosol flow have been studied as a simultaneous phenomenon of particle deposition and reentrainment. The experiments were conducted in a rectangular channel using alumina powders of D s 0.5-3.3 mm. p50 The state of the deposition layer was observed through a video microscope, and the surface profiles were measured with a scanning laser focus displacement meter. The experimental results showed that micrometer-sized particles formed a striped-pattern deposition layer as well as a filmy deposition layer, while sub-micron particles only formed a filmy deposition layer; the difference in the formation of these deposition layers was described in detail. Furthermore, a theoretical analysis taking account of the balance of the adhesive strength and the separation strength was carried out to explain the thickness of the deposition layer.