Synchrotron radiation based X-ray techniques for analysis of cathodes in Li rechargeable batteries (original) (raw)
Related papers
Chemical reviews, 2017
Rechargeable battery technologies have ignited major breakthroughs in contemporary society, including but not limited to revolutions in transportation, electronics, and grid energy storage. The remarkable development of rechargeable batteries is largely attributed to in-depth efforts to improve battery electrode and electrolyte materials. There are, however, still intimidating challenges of lower cost, longer cycle and calendar life, higher energy density, and better safety for large scale energy storage and vehicular applications. Further progress with rechargeable batteries may require new chemistries (lithium ion batteries and beyond) and better understanding of materials electrochemistry in the various battery technologies. In the past decade, advancement of battery materials has been complemented by new analytical techniques that are capable of probing battery chemistries at various length and time scales. Synchrotron X-ray techniques stand out as one of the most effective meth...
Applied Physics Letters, 1996
Hard x rays from a synchrotron source were utilized in diffraction experiments which probed the bulk of electrode materials while they were operating in situ in battery cells. Two technologically relevant electrode materials were examined; an AB 2 -type anode in a nickel-metal-hydride cell and a LiMn 2 O 4 cathode in a Li-ion ''rocking chair'' cell. Structural features such as lattice expansions and contractions, phase transitions, and the formation of multiple phases were easily observed as either hydrogen or lithium was electrochemically intercalated in and out of the electrode materials. The relevance of this technique for future studies of battery electrode materials is discussed.
Energies
The main challenges facing rechargeable batteries today are: (1) increasing the electrode capacity; (2) prolonging the cycle life; (3) enhancing the rate performance and (4) insuring their safety. Significant efforts have been devoted to improve the present electrode materials as well as to develop and design new high performance electrodes. All of the efforts are based on the understanding of the materials, their working mechanisms, the impact of the structure and reaction mechanism on electrochemical performance. Various operando/in-situ methods are applied in studying rechargeable batteries to gain a better understanding of the crystal structure of the electrode materials and their behaviors during charge-discharge under various conditions. In the present review, we focus on applying operando X-ray techniques to investigate electrode materials, including the working mechanisms of different structured materials, the effect of size, cycling rate and temperature on the reaction mech...
In situ X-ray absorption spectroscopy—A probe of cathode materials for Li-ion cells
Fluid Phase Equilibria, 2006
In situ X-ray absorption spectroscopy is a powerful emerging technique that has the capability to observe the changes in ongoing electrochemical reactions. It is already well established in materials science, and it is becoming a significant tool for the electrochemical community. As with all X-ray absorption spectroscopies, extended X-ray absorption fine structure (EXAFS) has the advantage of being element specific. Interpretation of the spectra at different states of charge can provide very useful quantitative and qualitative information about the valence change of the constituent elements in the cathode material during the ongoing electrochemical reaction, the degree of distortion or changes in structure from the initial state of charge to the final state of charge and provide valuable information about the extent of degradation of the cathode material during continuous cycling. It can also provide valuable insight about how the nature of the electrochemical reactions changes when one of the transition metal constituents is removed or increased in content in the cathode material. It is often important to adjust the composition of the cathode material in order to achieve high specific capacity and long-term stability in Li-ion cells. This article details the development of the in situ XAS techniques to study electrochemical reactions using various X-ray absorption spectroscopies which are now possible with the advent of third generation synchrotron radiation sources and improved end stations. The strength of in situ EXAFS techniques is illustrated using examples of various interesting transition metal oxides. In this way, we aim to encourage chemists, chemical engineers and materials scientists to consider in situ X-ray absorption spectroscopy as an effective tool for developing an understanding the electronic structure of materials and the changes that it undergoes during electrochemical reactions. (A. Deb).
e-Journal of Surface Science and Nanotechnology
For analysis of lithium ion batteries, the soft X-ray grating monochromator beamline BL-2 at SR center of Ritsumeikan University has been upgraded: adding a new grating (900 l/mm) to extend the available energy up to 1000 eV, and constructing a XAFS (X-ray Absorption Fine Structure)-PES (photoelectron spectroscopy) chamber equipped with in-situ transfer vessel systems. With this beamline, Li K-, O K-and 3d transition metal (TM) L-XAFS and Li 1s PES spectra were measured for several compounds related to Li ion batteries. For precise analysis of the Li chemical state, some of Li compounds, as well as Li metal were prepared by vacuum deposition.