Design and Performance Analysis of Ultra Wideband Double Inverted-FL Micro strip Antenna for Wi-Fi, WLAN, WiMAX and UMTS Applications (original) (raw)
Related papers
International Journal of Scientific & Technology Research, 2016
This paper presents a compact planar inverted–F antenna (PIFA) design for WLAN operation in portable devices. The proposed design has size of 8 x 21 mm and provides peak directive gain of 5.78dBi with the peak return loss of -33.89dB and input impedance of 50.28Ω. It covers a 10dB return loss bandwidth of 410MHz (2.37GHz – 2.789GHz). Its VSWR varies from 1.96 to 1.93 within the antenna return loss bandwidth. As the dimension of the proposed antenna is very small, the antenna is promising to be embedded within the different portable devices employing Wi–Fi applications. This paper includes the return loss as a function of frequency with varying the different parameters, VSWR, input resistance, radiation pattern and current distribution of the proposed antenna.
Novel ultrawideband and multiband triangular planar inverted F antenna for wireless applications
Microwave and Optical Technology Letters, 2007
A novel multi‐ and ultrawideband operation of a single feed triangular antenna are presented. For multi and UWB operation, the proposed design are achieved by inserting U shaped slot on the triangular PIFA with unequal arms, choosing between multi and ultrawide band by adjusting feeding position. Five resonant band of multi band operation is obtained in S‐band, Q‐band, bluetooth band, and WLAN band with acceptable impedance bandwidth. There is an increase in the number of resonant operating frequencies by etching U slot on the shorting feed plate. Ultrawideband is achieved by adjusting coaxial feed to obtained impedance bandwidth 27%. Enhancement impedance bandwidth by using folded shorting plate to improving bandwidth to achieve ultrawide bandwidth around 53%. The proposed antennas have acceptable gain around 11.5 dB. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 49: 2039–2043, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.22576
An UWB planar inverted-F antenna for wireless applications
2012 IEEE International Workshop on Antenna Technology (iWAT), 2012
The planar inverted-F antenna (PIFA) is widely used in mobile and portable radio systems due to its excellent features. However, it is not yet employed as an ultra wide band antenna because it was considered a narrowband antenna. This paper introduces an ultra wideband planar inverted-F antenna based on three techniques, which are (a) changes in the widths of feed and shorting plates, (b) addition of an inverted-L shaped parasitic element and (c) addition of a rectangular parasitic element. It is shown that ultra wideband PIFAs with fractional bandwidth of more than 100 % is achieved covering from 3.4 GHz to 10.7 GHz. Simulated and measured results are provided to verify the conclusion.
A PLANAR INVERTED F ANTENNA FOR WLAN
New wireless applications requiring operation in more than one frequency band are emerging. Dual-band and tri-band phones have gained popularity because of the multiple frequency bands used for wireless applications. One prominent application is to include bluetooth, operating band at 2.4 GHz, for shortrange wireless use. A dual band small size composite-resonator microstrip antenna configuration for wireless communications is presented in this paper. The proposed antennas, each is built of three resonant elements. Two types of compact short-circuited resonators are used and these are stepped impedance and quarter-wave resonators
Design of Inverted L-slot Ultra-Wideband Antenna
This paper includes a compact sized printed micro-strip antenna (MSA) design which covers the entire ultra-wideband (UWB) ranges from 2 GHz-14 GHz with single wideband notch. A band notch antenna is designed by cutting slots in the radiation element of circular shape radiator patch in order to avoid the potential interference with coexisting wireless local area network (WLAN) systems operating over 5.15-5.825GHz. Here the inverted L-slot is used to provide the desirable wide stop-band to avoid interference with the licensed band. For better performance of the antenna FR4 dielectric substrate with high permittivity () of 4.4 and low loss is used. Radiation pattern is found omnidirectional with Gain more than 3 dB for single band notch operation. The parameters are optimized and simulated in CST Microwave Studio.
IJERT-Design of Wideband Inverted F Antenna for Wireless Communication at 5.76 Ghz
International Journal of Engineering Research and Technology (IJERT), 2013
https://www.ijert.org/design-of-wideband-inverted-f-antenna-for-wireless-communication-at-5.76-ghz https://www.ijert.org/research/design-of-wideband-inverted-f-antenna-for-wireless-communication-at-5.76-ghz-IJERTV2IS1354.pdf In this paper, a new wire inverted F antenna (WIFA) is proposed, which is structured by wire grid modeling of a thick WIFA. The proposed antenna is directly fed by a coaxial connector and antenna arms effectively control the excited resonant modes for the required operation, the area occupies by the antenna is 10.23mm×4.69mm. A laboratory prototype of the antenna was built and tested indicating good result. It shows 40% bandwidth for VSWR < 2.0. The wire inverted F antenna is widely used in wireless application due to its simple design, flexibility, low cost and reliable performance. This antenna is designed at 5.76 GHz. This microwave frequency is specially used for Wi-Fi and WLAN applications.
DUAL BAND TWO ELEMENTS INVERTED-L ANTENNA FOR 3.5 & 5 GHZ MOBILE WIMAX/ WI-FI APPLICATIONS
2011
This paper presents the numerical simulations of dual band two elements Inverted-L antenna for 3.5 GHz mobile WiMAX and 5 GHz Wi-Fi operation. The proposed antenna is feed by a coaxial connector. The antenna arms effectively control the excited resonant modes for Wi-Fi and mobile WiMAX operation. Total area occupies by the antenna is 20 mm × 30 mm. The antenna contains substantial gain with less than 0.3 and 2 dBi gain variation within the-10 dB return loss bandwidth at 3.5 and 5 GHz operating frequency respectively. In addition, the antenna has achievable bandwidth, return loss and radiation characteristics for both frequencies. Due to the compact area occupied, the proposed antenna is promising to be embedded within the different portable devices employing 3.5 GHz mobile WiMAX and 5 GHz Wi-Fi operation.
Dual Band Two Elements Inverted-L Antenna for 3.5 & 5 Ghz Mobile Wimax/Wi-Fi Applications
International Journal of Computer Science & Engineering Survey, 2011
This paper presents the numerical simulations of dual band two elements Inverted-L antenna for 3.5 GHz mobile WiMAX and 5 GHz Wi-Fi operation. The proposed antenna is feed by a coaxial connector. The antenna arms effectively control the excited resonant modes for Wi-Fi and mobile WiMAX operation. Total area occupies by the antenna is 20 mm × 30 mm. The antenna contains substantial gain with less than 0.3 and 2 dBi gain variation within the-10 dB return loss bandwidth at 3.5 and 5 GHz operating frequency respectively. In addition, the antenna has achievable bandwidth, return loss and radiation characteristics for both frequencies. Due to the compact area occupied, the proposed antenna is promising to be embedded within the different portable devices employing 3.5 GHz mobile WiMAX and 5 GHz Wi-Fi operation.
Design of Multiband Microstrip U- Shaped Planar Inverted F Antenna
Majlesi Journal of Telecommunication Devices, 2015
In this paper, a new design of multiband microstrip U-shaped PIFA antennas is proposed. The antenna has a U-shaped patch on a substrate with dielectric constant of 3 and is shorted to the ground plane through two shorting walls. The antenna operates in three separated frequency bands including 1.16-1.24 GHz, 2.37-2.44 GHz and 3.65-3.75 GHz. That is suitable for wireless frequency bands applications. The first frequency band of antenna is used for wireless video links and wireless video transmitters. The second and third frequency bands are usable for Wi-Fi, Wireless Local Area Network (WLAN) and Bluetooth bands. A slot has been designed on the ground plane to improve radiations at 2.4 GHz and to enhance the bandwidth of the antenna at resonance frequencies