Variability of surface and center position radiation dose in MDCT: Monte Carlo simulations using CTDI and anthropomorphic phantoms (original) (raw)

Monte Carlo- versus pencil-beam-/collapsed-cone-dose calculation in a heterogeneous multi-layer phantom

2005

A phantom for dosimetric characterization of small radiation fields: design and use

Medical Dosimetry, 2000

Evaluation of cumulative dose for cone-beam computed tomography (CBCT) scans within phantoms made from different compositions using Monte Carlo simulations

Kurian Oomen

Journal of Applied Clinical Medical Physics, 2015

View PDFchevron_right

Monte Carlo simulation for dose distribution calculations in a CT-based phantom at the Portuguese gamma irradiation facility

Hélio Yoriyaz

Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2004

View PDFchevron_right

The Design and Use of the ICRU/AAPM CT Radiation Dosimetry Phantom: An Implementation of AAPM Report 111

Huaiyu Chen-Mayer

2020

View PDFchevron_right

Investigating the feasibility of 3D dosimetry in the RPC IMRT H&N phantom

G. Ibbott

Journal of Physics: Conference Series, 2009

View PDFchevron_right

CT dosimetry considerations in non typical conditions: The effect of scan field of view and table height selection

Ioannis Abatzoglou PhD, Ioannis A Tsalafoutas

Physica Medica, 2012

View PDFchevron_right

A comprehensive evaluation of the PRESAGE/optical-CT 3D dosimetry system

John Adamovics

Medical Physics, 2009

View PDFchevron_right

Investigation of the feasibility of relative 3D dosimetry in the Radiologic Physics Center Head and Neck IMRT phantom using Presage/optical-CT

John Adamovics

Medical Physics, 2009

View PDFchevron_right

Monte Carlo Estimation of Dose in Heterogeneous Phantom Around 6MV Medical Linear Accelerator

Zakaria Aitelcadi

Advances in Science, Technology and Engineering Systems Journal

View PDFchevron_right

Validation of the RayStation Monte Carlo dose calculation algorithm using realistic animal tissue phantoms

Marc Blakey

Journal of Applied Clinical Medical Physics

View PDFchevron_right

Simple 3D validation experiments for PRESAGE TM /optical-CT dosimetry

John Adamovics

Journal of Physics: Conference Series, 2006

View PDFchevron_right

Dose Distribution in 3D Water Phantom and Profiler 2 Scanning System

Kabelo Moji

International Journal of Sciences: Basic and Applied Research, 2017

View PDFchevron_right

Comparison of dose calculation algorithms in slab phantoms with cortical bone equivalent heterogeneities

Pablo Carrasco

Medical Physics, 2007

View PDFchevron_right

Evaluation of patient dose using a virtual CT scanner: Applications to 4DCT simulation and Kilovoltage cone-beam imaging

Erin Angel

Journal of Physics: Conference Series, 2008

View PDFchevron_right

7th International Conference on 3D Radiation Dosimetry (IC3DDose)

Clive Baldock

Journal of Physics: Conference Series, 2013

View PDFchevron_right

A 'quad-phantom' film dosimeter for use as a multi-planar verification tool for PRESAGE/optical-CT

John Adamovics

Journal of Physics: Conference Series, 2010

View PDFchevron_right

CT Output Dose Performance-Conventional Approach versus the Dose Equilibrium Method

niall colgan

International Journal of Medical Physics, Clinical Engineering and Radiation Oncology, 2018

View PDFchevron_right

A comprehensive Monte Carlo study of CT dose metrics proposed by the AAPM Reports 111 and 200

Paulo Roberto Costa

Medical Physics, 2021

View PDFchevron_right

Computed tomography dose index and dose length product for cone-beam CT: Monte Carlo simulations

Fang-fang Yin

View PDFchevron_right

Monte Carlo simulation and patient dosimetry for a kilovoltage cone-beam CT unit

Emiliano Spezi

Medical Physics, 2009

View PDFchevron_right

An investigation into the robustness of Optical-CT dosimetry of a radiochromic dosimeter compatible with the RPC Head-and-Neck Phantom

G. Ibbott

Journal of Physics: Conference Series, 2009

View PDFchevron_right

CTDI versus New AAPM Metrics to assess Doses in CT: a case study

Maria Carolina S. Campelo, Marcia de Carvalho Silva, Ricardo A Terini

View PDFchevron_right

Verification of Acuros XB dose algorithm using 3D printed low-density phantoms for clinical photon beams

Eduardo Villarreal

Journal of Applied Clinical Medical Physics

View PDFchevron_right

Optimization study of a medical phantom allowing the mapping of absorbed dose induced by ionizing radiations

IPCO Academy

View PDFchevron_right

A comparison of radiation dose measured in CT dosimetry phantoms with calculations using EGS4 and voxel-based computational models

Martin Caon

Physics in medicine and biology, 1997

View PDFchevron_right

Percentage depth dose (PDD) and Beam profile measurements using CT based MAGAT gel dosimetry system and Monte Carlo calculation

Science Park Research Organization & Counselling

View PDFchevron_right

Entrance surface dose measurements using a small OSL dosimeter with a computed tomography scanner having 320 rows of detectors

Ikuo Kobayashi

Radiological physics and technology, 2016

View PDFchevron_right

An investigation of entrance surface dose calculations for diagnostic radiology using Monte Carlo simulations and radiotherapy dosimetry formalisms

N. Chahed

Physics in Medicine and Biology, 2003

View PDFchevron_right

Calibration of thermoluminescent dosimeters placed inside the anthropomorphic phantom which is used for CT effective dose evaluation

Mikhail Zelikman

2011

View PDFchevron_right

An investigation of the accuracy of an IMRT dose distribution using two- and three-dimensional dosimetry techniques

John Adamovics

Medical Physics, 2008

View PDFchevron_right

Multi-scale dosimetry with multi-scale Chinese reference phantoms

RUIYAO MA

Journal of Physics: Conference Series, 2019

View PDFchevron_right

Variability of surface and center position radiation dose in MDCT: Monte Carlo simulations using CTDI and anthropomorphic phantoms (original) (raw)

Related papers