Two-Dimensional Supramolecular Electron Spin Arrays (Adv. Mater. 17/2013) (original) (raw)
Related papers
Realizing Two-Dimensional Spin Arrays on Surfaces via Halogen-Bonding Molecular Self-Assembly
2021
Well-ordered spin arrays are highly desirable for next-generation molecule-based magnetic devices, and yet its synthetic method remains a challenging task. Herein, we demonstrate the realization of two-dimensional supramolecular spin arrays on surfaces via halogen-bonding molecular self-assembly. A bromine-terminal perchlorotriphenymethyl radical with net carbon spin was synthesized and deposited on Au(111) to achieve two-dimensional supramolecular spin arrays. By taking advantage of the diversity of halogen bonds, five supramolecular spin arrays are presented with ultrahigh spin densities (up to the value of 3 × 1013 spins at the size of a flash drive), as probed by low-temperature scanning tunneling microscopy at the single-molecule level. First principle calculations verify that the formation of three distinct types of halogen bonds can be used to tailor supramolecular phases via molecular coverage and annealing temperature. Our work demonstrates supramolecular self-assembly as a...
Nature Materials, 2009
Magnetic atoms at surfaces are a rich model system for solid-state magnetic bits exhibiting either classical 1,2 or quantum 3,4 behaviour. Individual atoms, however, are difficult to arrange in regular patterns 1-5 . Moreover, their magnetic properties are dominated by interaction with the substrate, which, as in the case of Kondo systems, often leads to a decrease or quench of their local magnetic moment 6,7 . Here, we show that the supramolecular assembly of Fe and 1,4-benzenedicarboxylic acid molecules on a Cu surface results in ordered arrays of high-spin mononuclear Fe centres on a 1.5 nm square grid. Lateral coordination with the molecular ligands yields unsaturated yet stable coordination bonds, which enable chemical modification of the electronic and magnetic properties of the Fe atoms independently from the substrate. The easy magnetization direction of the Fe centres can be switched by oxygen adsorption, thus opening a way to control the magnetic anisotropy in supramolecular layers akin to that used in metallic thin films 8-11 .
Nature Materials, 2005
The ability to manipulate electron spin in organic molecular materials offers a new and extremely tantalizing route towards spin electronics, both from fundamental and technological points of view. This is mainly due to the unquestionable advantage of weak spin-orbit and hyperfi ne interactions in organic molecules, which leads to the possibility of preserving spin-coherence over times and distances much longer than in conventional metals or semiconductors. Here we demonstrate theoretically that organic spin valves, obtained by sandwiching an organic molecule between magnetic contacts, can show a large bias-dependent magnetoresistance and that this can be engineered by an appropriate choice of molecules and anchoring groups. Our results, obtained through a combination of state-of-the-art non-equilibrium transport methods and density functional theory, show that although the magnitude of the effect varies with the details of the molecule, large magnetoresistance can be found both in the tunnelling and the metallic limit. I n the search for large magnetoresistance in both the tunnelling and metallic regime, we analyse respectively n-alkane-dithiolate and 1,4-n-phenyl-dithiolate molecules. In the case of nickel contacts the fi rst molecule shows tunnelling behaviour with the spin-polarization of the current mainly given by surface states at the interface between the nickel and the molecule. In contrast, in 1,4-n-phenyl-dithiolate the transport is by means of states extending across the whole molecule, which determine the spin-polarization of the junction. Our fi ndings raise expectations for a chemical route to spintronics devices 1 , where effi ciency and performance can be engineered by the appropriate choice of molecules and end groups, thus integrating the two burgeoning fi elds of molecular-and spin-electronics.
Magnetochemistry
Single layer low-dimensional materials are presently of emerging interest, including in the context of magnetism. In the present report, on-surface supramolecular architecturing was further developed and employed to create surface supported two-dimensional binary spin arrays on atomically clean non-magnetic Au(111). By chemical programming of the modules, different checkerboards were produced combining phthalocyanines containing metals of different oxidation and spin states, diamagnetic zinc, and a metal-free ‘spacer’. In an in-depth, spectro-microscopy and theoretical account, we correlate the structure and the magnetic properties of these tunable systems and discuss the emergence of 2D Kondo magnetism from the spin-bearing components and via the physico-chemical bonding to the underlying substrate. The contributions of the individual elements, as well as the role of the electronic surface state in the bottom substrate, are discussed, also looking towards further in-depth investiga...
Journal of Applied Physics, 2019
We report the spin-dependent transport and the I-V hysteretic characteristics in molecular-level organic spin valves containing a self-assembled-monolayer (SAM) barrier of 1,4 benzenedimethanethiol (BDMT). X-ray photoelectron spectroscopy confirms the establishment of an ordered self-assembled monolayer of BDMT with the phosphonic groups coordinated onto the ferromagnet surface. The magnetoresistive (MR) and the I-V curves characterize the transport properties of the SAM-based organic spin valves, which exhibit both types of non-volatile memory switching, i.e., the magnetoresistive and the memristive switching. The results reveal the possibility of integrating organic SAM into the future multifunctional molecular-level spintronic device applications.
Spintronics with single molecules
2012
We demonstrate that with the help of Scanning Tu nneling Microscopy (STM), spintronic functions can be realized with single molecules. First, spin transport across single organic molecules was investigated and a molecular giant magnetoresistance (GMR) junction was realized. For this, single phthalocyanine molecules (Pc) were contacted by two ferromagnetic electrodes or by an antiferromagnetic and a ferromagnetic electrode. As substrates, ferromagnetic Co nano-islands grown Cu(ll1) or anti ferromagnetic Mn films on Fe(IOO) were used, onto which the Pc molecules were deposited. The magnetic state of the substrate was determined by spin-polarized STM with Co or Fe tips. Then, the tip of the STM was approached in a controlled way to contact the molecule. Below 0.4 nm distance, an attractive interaction between the tip and the molecule leads to a jump to contact of one of the side groups of the molecule and to a well defined molecular junction. Through the contacted molecule, a GMR of 60% was observed in case of Co substrates and Co tips. In case of Mn surfaces and Fe tips, a negative GMR of-50% was seen. These results are explained on basis of ab initio calculations showing a selective hybridization of the molecular states with states of the electrodes. Second, we demonstrate that single spin-crossover molecules can be switched between a non-magnetic and a magnetic state reversibly and deterministically by the application of local tunneling currents and that the lifetimes of both states exceed practical measuring times of STM. Thus, we demonstrate a magnetic memory device containing a single magnetic molecule and which can be read and written entirely by electric currents.
The Exploitation of Versatile Building Blocks for the Self-Assembly of Novel Molecular Magnets
Journal of Solid State Chemistry, 2001
Using molecular building blocks to self-assemble lattices supporting long-range magnetic order is currently an active area of solid-state chemistry. Consequently, it is the realm of supramolecular chemistry that synthetic chemists are turning to in order to develop techniques for the synthesis of structurally well-de5ned supramolecular materials. In recent years we have investigated the versatility and usefulness of two classes of molecular building blocks, namely, tris-oxalato transition-metal (M. Pilkington and S. Decurtins, in 99Magnetoscience=From Molecules to Materials,:: Wiley+VCH, 2000), and octacyanometalate complexes (Pilkington and Decurtins, Chimia 54, 593 ), for applications in the 5eld of molecule-based magnets. Anionic, tris-chelated oxalato building blocks are able to build up two-dimensional honeycomb-layered structural motifs as well as three-dimensional decagon frameworks. The discrimination between the crystallization of the two-or threedimensional structures relies on the choice of the templating counterions (Decurtins, Chimia 52, 539 (1998); Decurtins et al. Mol. Cryst. Liq. Cryst. 273, 167 (1995); New J. Chem. 117 (1998)). These structural types display a range of ferro, ferri, and antiferromagnetic properties (Pilkington and Decurtins, in 99Magnetoscience=From Molecules to Materials::). Octacyanometalate building blocks self-assemble to a4ord two new classes of cyano-bridged compounds namely, molecular clusters and extended three dimensional networks (J. Larionova et al., Angew. Chem. Int. Ed. 39, 1605 (2000); Pilkington et al., in preparation). The molecular cluster with a Mn II 9 Mo V 6 core has the highest ground state spin value, S ؍ 51/2, reported to-date (Larionova et al., Angew. Chem. Int. Ed. 39, 1605 (2000)). In the high-temperature regime, the magnetic properties are characterized by ferromagnetic intracluster coupling. In the magnetic range below 44 K, the magnetic cluster signature is lost as possibly a bulk behavior starts to emerge. The three-dimensional networks exhibit both paramagnetic and ferromagnetic behavior, since the magnetic properties of these materials directly re6ect the electronic con5guration of the metal ion incorporated into the octacyanometalate building blocks (Pilkington et al., in preparation). For both the oxalate-and cyanide-bridged materials, we are able to manipulate the magnetic properties of the supramolecular assemblies by tuning the electronic con5gurations of the metal ions incorporated into the appropriate molecular building blocks (Pilkington and Decurtins, in 99Magnetoscience=From Molecules to Materials,:: Chimia 54, 593 ).
Tuning the Magnetic Coupling of a Molecular Spin Interface via Electron Doping
Mastering the magnetic response of molecular spin interfaces by tuning the occupancy of the molecular orbitals, which carry the spin magnetic moment, can be accomplished by electron doping. We propose a viable route to control the magnetization direction and magnitude of a molecular spin network, in a graphene-mediated architecture, achieved via alkali doping of manganese phthalocyanine (MnPc) molecules assembled on cobalt intercalated under a graphene membrane. The antiparallel magnetic alignment of the MnPc molecules with the underlying Co layer can be switched to a ferromagnetic state by electron doping. Multiplet calculations unveil an enhanced magnetic state of the Mn centers with a 3/2 to 5/2 spin transition induced by alkali doping, as confirmed by the steepening of the hysteresis loops, with higher saturation magnetization values. This new molecular spin configuration can be aligned by an external field, almost independently from the hardmagnet substrate effectively behaving as a free magnetic layer.