Enhanced stiffness modeling of serial manipulators with passive joints (original) (raw)
Related papers
The paper presents an advanced stiffness modeling technique for perfect and non-perfect parallel manipulators under internal and external loadings. Particular attention is paid to the manipulators composed of non-perfect serial chains, whose geometrical parameters differ from the nominal ones and do not allow to assemble manipulator without internal stresses that considerably affect the stiffness properties and also change the end-effector location. In contrast to other works, several types of loadings are considered simultaneously: an external force applied to the end-effector, internal loadings generated by the assembling of non-perfect serial chains and external loadings applied to the intermediate points (auxiliary loading due to the gravity forces and relevant compensator mechanisms, etc.). For this type of manipulators, a non-linear stiffness modeling technique is proposed that allows to take into account inaccuracy in the chains and to aggregate their stiffness models for the case of both small and large deflections. Advantages of the developed technique and its ability to compute and compensate the compliance errors caused by the considered factors are illustrated by an example that deals with parallel manipulators of the Orthoglide family. Stiffness modeling for perfect and non-perfect parallel manipulators under internal and external loadings 2 2 Related works on the stiffness modeling of robotic manipulator
Stiffness analysis of multi-chain parallel robotic systems
2009
The paper presents a new stiffness modelling method for multi-chain parallel robotic manipulators with flexible links and compliant actuating joints. In contrast to other works, the method involves a FEA-based link stiffness evaluation and employs a new solution strategy of the kinetostatic equations, which allows computing the stiffness matrix for singular postures and to take into account influence of the external forces. The advantages of the developed technique are confirmed by application examples, which deal with stiffness analysis of a parallel manipulator of the Orthoglide family.
Stiffness modeling of non-perfect parallel manipulators
IEEE International Conference on Intelligent Robots and Systems, 2012
The paper focuses on the stiffness modeling of parallel manipulators composed of non-perfect serial chains, whose geometrical parameters differ from the nominal ones. In these manipulators, there usually exist essential internal forces/torques that considerably affect the stiffness properties and also change the end-effector location. These internal loadings are caused by elastic deformations of the manipulator elements during assembling, while the geometrical errors in the chains are compensated for by applying appropriate forces. For this type of manipulators, a non-linear stiffness modeling technique is proposed that allows us to take into account inaccuracy in the chains and to aggregate their stiffness models for the case of both small and large deflections. Advantages of the developed technique and its ability to compute and compensate for the compliance errors caused by different factors are illustrated by an example that deals with parallel manipulators of the Orthoglide family.
STIFFNESS ANALYSIS OF MULTI-CHAIN PARALLEL ROBOTIC SYSTEMS WITH LOADING
The paper presents a new stiffness modelling method for multi-chain parallel robotic manipulators with flexible links and compliant actuating joints. In contrast to other works, the method involves a FEA-based link stiffness evaluation and employs a new solution strategy of the kinetostatic equations, which allows computing the stiffness matrix for singular postures and to take into account influence of the external forces. The advantages of the developed technique are confirmed by application examples, which deal with stiffness analysis of a parallel manipulator of the Orthoglide family.
Advancement of MSA-Technique for Stiffness Modeling of Serial and Parallel Robotic Manipulators
ROMANSY 22 – Robot Design, Dynamics and Control, 2018
The paper presents advancement of the matrix structural analysis technique (MSA) for stiffness modeling of robotic manipulators. In contrast to the classical MSA, it can be applied to both parallel and serial manipulators composed of flexible and rigid links connected by rigid, passive or elastic joints with multiple external loadings. The manipulator stiffness model is presented as a set of basic equations describing the link elasticities that are supplemented by a set of constraints describing connections between links. These equations are aggregated straightforwardly in a common linear system without traditional merging of the matrix rows and columns, which allows avoiding conventional manual transformations at the expense of numerical inversion of the sparse matrix of higher dimension.
Stiffness analysis of overconstrained parallel manipulators
Mechanism and Machine Theory, 2009
The paper presents a new stiffness modeling method for overconstrained parallel manipulators with flexible links and compliant actuating joints. It is based on a multidimensional lumped-parameter model that replaces the link flexibility by localized 6-dof virtual springs that describe both translational/rotational compliance and the coupling between them. In contrast to other works, the method involves a FEA-based link stiffness evaluation and employs a new solution strategy of the kinetostatic equations for the unloaded manipulator configuration, which allows computing the stiffness matrix for the overconstrained architectures, including singular manipulator postures. The advantages of the developed technique are confirmed by application examples, which deal with comparative stiffness analysis of two translational parallel manipulators of 3-PUU and 3-PRPaR architectures. Accuracy of the proposed approach was evaluated for a case study, which focuses on stiffness analysis of Orthoglide parallel manipulator.
Stiffness Analysis of Parallel Manipulator Using Matrix Structural Analysis
Proceedings of EUCOMES 08
The paper generalizes existing contributions to the stiffness modeling of robotic manipulators using Matrix Structural Analysis. It presents a unified and systematic approach that is suitable for serial, parallel and hybrid architectures containing closed-loops, flexible links, and rigid connections, passive and elastic joints, flexible and rigid platforms, taking into account external loadings and preloadings. The proposed approach can be applied to both under-constrained, fully-constrained and over-constrained manipulators in generic and singular configurations, it is able to produce either non-singular or rank-deficient Cartesian stiffness matrices in a semi-analytical manner. It is based on a unified mathematical formulation that presents the manipulator stiffness model as a set of two groups of matrix equations describing elasticity of separate links and connections between the links in the form of constraints. Its principal advantage is the simplicity of the model generation that includes straightforward aggregation of link/joint equations without conventional merging of rows and columns in the global stiffness matrix. The advantages of this method and its application are illustrated by an example that deals with the stiffness analysis of NaVaRo parallel manipulator.
Enhanced stiffness modeling of manipulators with passive joints
Mechanism and Machine Theory, 2011
The paper presents a methodology to enhance the stiffness analysis of serial and parallel manipulators with passive joints. It directly takes into account the loading influence on the manipulator configuration and, consequently, on its Jacobians and Hessians. The main contributions of this paper are the introduction of a non-linear stiffness model for the manipulators with passive joints, a relevant numerical technique for its linearization and computing of the Cartesian stiffness matrix which allows rank-deficiency. Within the developed technique, the manipulator elements are presented as pseudo-rigid bodies separated by multidimensional virtual springs and perfect passive joints. Simulation examples are presented that deal with parallel manipulators of the Ortholide family and demonstrate the ability of the developed methodology to describe nonlinear behavior of the manipulator structure such as a sudden change of the elastic instability properties (buckling). (A. Pashkevich).
Stability of manipulator configuration under external loading
ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012, 2012
HAL is a multidisciplinary open access archive for the deposit and dissemination of scientific research documents, whether they are published or not. The documents may come from teaching and research institutions in France or abroad, or from public or private research centers. L'archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des établissements d'enseignement et de recherche français ou étrangers, des laboratoires publics ou privés.
Stiffness Analysis of Parallel Manipulators with Preloaded Passive Joints
Advances in Robot Kinematics: Motion in Man and Machine, 2010
The paper presents a methodology for the enhanced stiffness analysis of parallel manipulators with internal preloading in passive joints. It also takes into account influence of the external loading and allows computing both the non-linear "load-deflection" relation and the stiffness matrices for any given location of the end-platform or actuating drives. Using this methodology, it is proposed the kinetostatic control algorithm that allows to improve accuracy of the classical kinematic control and to compensate position errors caused by elastic deformations in links/joints due to the external/internal loading. The results are illustrated by an example that deals with a parallel manipulator of the Orthoglide family where the internal preloading allows to eliminate the undesired buckling phenomena and to improve the stiffness in the neighborhood of its kinematic singularities.