Numerical evaluation of the wave energy resource along the Atlantic European coast (original) (raw)
Related papers
Assessment of Mean Wave Energy Potential for the Atlantic European Coast Using Numerical Modelling
In order to characterize the wave conditions and assess the wave energy potential for the Atlantic European coast, two state of the art spectral models were used: WaveWatch III used for wave generation covering almost the entire North Atlantic basin which outputs are then used as boundary conditions for SWAN used for wave transformation in coastal areas. Wind fields were taken from ERA Interim data base, owned by ECMWF. Validation tests were carried out with buoy data so that the model's performance could be evaluated. The time series evolution of SWAN’s simulation and buoy’s data are presented as well as statistic parameters such as Root Mean Square Error, Bias, Scatter Index and Correlation coefficient. Theoretical values for wave power were calculated using the energy transport vectors. Energetic assessment was done for a period of several years and mean values of energy potential were estimated and analysed on a monthly basis.
Wave Energy Assessments in the Coastal Environment of Portugal Continental
Volume 6: Nick Newman Symposium on Marine Hydrodynamics; Yoshida and Maeda Special Symposium on Ocean Space Utilization; Special Symposium on Offshore Renewable Energy, 2008
The potential for wave energy extraction can be obtained from the analysis of the wave climate which can be determined with numerical models. The wave energy devices can be deployed in offshore, nearshore and shoreline. From this reason, it is important to be able to assess properly the spatial distribution of the wave energy in various locations from the offshore to the coastline in a specific area. The methodology proposed here considers a SWAN based wave model system focusing in the Portuguese continental coastal environment from deep water towards the nearshore. An analysis of the average and high energetic conditions was first performed for a ten-year period, between 1994 and 2003, considering the most relevant in situ measurements available in the Portuguese nearshore. In this way both the average and high energetic conditions corresponding to the Portuguese continental costal environment have been properly defined. For the most relevant average wave conditions, SWAN simulatio...
Modelling wave energy for the north coast of Spain
Maritime Engineering and Technology, 2012
Two state-of-the-art spectral models, WAVEWATCH III (Tolman 2009) and SWAN (Booij et al. 1999), are used to create a wave prediction system with the aim to characterize wave energy conditions for the Spanish North Coast. Direct comparisons are made and statistical results are obtained to assess the reliability of the wave prediction system developed. The wave parameters considered for those comparisons are significant wave heights, mean and peak periods. Theoretical values of wave power are estimated and the spatial distribution of wave energy was evaluated considering a relevant scenario and some areas with greater energetic potential is identified. Overall the wave prediction system gives reasonable results when compared with the buoy data and, therefore, the results obtained for wave power can be accepted as being near to the real potential for the north coast of Spain.
Renewable Energy, 2018
An assessment of wave power resource for Portugal continental coast is presented, using thirty three years (1979-2012) of wave hindcast. The hindcast system is based in two spectral wave models, WWIII (WAVEWATCHIII) for the wave generation and SWAN (Simulating WAves Nearshore) for wave transformation in coastal areas. To improve the SWAN model performance, six high resolution areas (Aguçadoura,
Modelling wave energy resources for UK's southwest coast
2011
In the present study, a wave prediction system based on two state-of-the-art spectral models, WAVEWATCH III™ and SWAN, was implemented in order to evaluate UK's wave conditions and to assess potential wave energy extraction. The WWIII is used for wave generation and coupled with SWAN, which is used for wave transformation in coastal areas. Wind fields for model input were taken from NCEP's Reanalysis 2, with time steps of 6 hours. Wave parameters are obtained for sites close to the coast and in particular for two tests sites: the site off Cornwall (Wave Hub test site) and the site off the Pembrokeshire Coast. Validation tests are carried out with buoy data from the British Oceanographic Data Centre so that the model's performance can be evaluated. The time period considered is April and May, 1977. Regarding the energetic assessment, a case study is considered and an analysis is done for the energy transport per unit of wave front and its theoretical values of wave power. This work is developed in the framework of a European project with intend to provide resource information to the marine renewable energy sector.
Wave energy assessement for Northern Spain from a 33-year hindcast
Renewable Energy, 2018
The wave energy resource along the Northern Spanish coast is determined, for a period of 33 years (1979-2012) based on hindcast results of WAVEWATCH III for the Atlantic ocean area, coupled with the SWAN model for the coastal areas, and using surface winds from ECMWF's ERA-Interim data base. Results are validated with buoy data, in order to evaluate the model's accuracy. Statistical analysis of the wave parameters and wave power results are presented. The analysis was carried out for a coarse grid, on the North of Spain, and for three local areas with a finer mesh: Northwest Galicia, the area between Cape San Adrián and Cape Ortegal and Santander. The case studies include a more realistic perspective of the amount of energy that can be extracted with a wave energy converter, by adopting examples of a large and a small device. A seasonal variability evaluation is done for the nested areas through the analyzes of the seasonal average wave power resource for the different locations, throughout the 33 year hindcast, and the joint distributions of significant wave height and peak period for the number of occurrences and wave power.
Hindcast of the wave conditions along the west Iberian coast
This paper describes the development of a wave prediction system for the west Iberian coast. The implemented wave prediction system is based on two state-of-the-art spectral wave models, WAM for the ocean area and SWAN for the nearshore. However, because of its extended geographical space the SWAN model will include some generation effects in the coarse SWAN simulations, complemented by wave transformation effects near the coast. The system was validated by means of extended hindcast runs in various regions belonging to the continental Portuguese coastal environment, which were compared with buoy data, focusing on the extreme energetic events and both direct comparisons and statistical results are presented.
Wave energy conditions in the western French coast
Renewable Energy, 2014
This paper presents a numerical study of the wave energy distribution in the western French coast, in particular in its pilot zone, as part of an European project, aiming to characterize the wave energy in the Atlantic coast of Europe. For this study two third generation state of the art models are used. A generation model, WAVEWATCH III is used to generate waves for the entire North Atlantic basin, so as to properly account for the swell that arrives at the location and a transformation model, SWAN, models the evolution of the waves in the French coast, as a result of wind forcing.
A 33-year hindcast on wave energy assessment in the western French coast
Energy, 2018
A 33-year hindcast is presented to quantify the wave energy resource available in the Atlantic coast of France, showing its availability and variability. The evaluation of the waves is performed using WAVEWATCH III model for the Atlantic Ocean and SWAN model for the western French coast. The hindcast was validated in a prior study, presenting good results. Given the growing need of a good description of the wave climate in any given location, this study intends to provide a more robust characterization of the wave climate, combining previous results with the new studies, leading to a 33-year hindcast for the western coast of France, focussing in the test site area of the SEM-REV location.
Numerical Modeling of the Wave Energy Propagation in the Iberian Nearshore
Energies
In the present work the wave energy propagation patterns in the western side of the Iberian nearshore were evaluated. This assessment takes into account the results provided by a wave modelling system based on spectral phase averaged wave models, which considers subsequent computational domains with increasing resolution towards the coast. The system was previously validated against both in situ measurements and remotely sensed data. Moreover, several data assimilation techniques were implemented as well. In this way, the reliability of the wave predictions was significantly increased. Although extended wave hindcasts have already been carried out close to the Iberian coast of the Atlantic Ocean, including wave energy assessments, they might not be completely accurate because of recent changes in the dynamics of the ocean and coastal wave climate. Thus, the present work considers wave nowcasts that correspond to the most recent and relevant wave energy propagation patterns in the targeted coastal environment. In order to perform this analysis, four different computational levels were considered. The first level corresponds to the sub oceanic domain and it is linked directly to the oceanic wave model, which is implemented over the entire North Atlantic Ocean. The second is related to the coarser computational domains of the coastal areas, while the third relates to the high-resolution domains. These three levels are defined as spherical coordinates (longitude, latitude). Finally, the last computational level includes some coastal areas which have the highest spatial resolution, defined considering the Cartesian coordinates. Moreover, for each level several computational domains have been considered. This work illustrates the most recent and significant wave transformation and energy propagation patterns corresponding to 18 computational domains with various resolutions in the western Iberian coastal environment.