Inkjet printing processing conditions for bulk-heterojunction solar cells using two high-performing conjugated polymer donors (original) (raw)
Related papers
High Photovoltaic Performance of Inkjet Printed Polymer:Fullerene Blends
Advanced Materials, 2007
During the past decade, there has been an intensive search for cost-effective photovoltaics. Among the alternative technologies to inorganic solar cells, polymer solar cells could provide the most significant cost reduction since their solution processability at low temperatures may ultimately allow for the printing of large area solar cells on flexible substrates with low fabrication cost. At present bulk heterojunction structures, based on blends of polymer donors and highly soluble fullerene-derivative acceptors, are the material systems with the highest published power conversion efficiencies (PCE) [3] . Konarka Technologies have recently demonstrated a 5.21 % PCE plastic solar cell with an active area of 1.024 cm 2 (NREL certificate for Konarka solar cell from 11-20-2006). The demonstration of higher than 5 % PCE solar cells under calibrated (AM) 1.5 conditions demonstrates the potential of the technology. The identification of suitable printing methods for the production of organic solar cells is regarded as the next important milestone.
Inkjet-printed polymer–fullerene blends for organic electronic applications
Microelectronic Engineering, 2012
Organic field effect transistors, photodiodes and solar cells based on polymer-fullerene blend active layers are printed electronic applications under intense studies. We show that the viscosity of the inkjet formulation, substrate temperature, drop spacing and the height of the droplet in relation to the surface are critical parameters to achieving high quality inkjet-printed polymer-fullerene based active layers. The effect of the above processing parameters on the performance of polymer-fullerene based organic solar cells is presented.
Combinatorial Screening of Polymer:Fullerene Blends for Organic Solar Cells by Inkjet Printing
Advanced Energy Materials, 2010
Inkjet printing is a highly material-efficient solution deposition technique that enables the preparation of thin-film libraries using little amounts of materials. As a reproducible and precise patterning technique inkjet printing can be integrated into a combinatorial screening workflow that allowed the systematic characterization of thin-film properties of newly developed materials as well as the methodical investigation of preparation parameter that influence the performance of the inkjet printed layers. This contribution provides a demonstration of a combinatorial screening workflow that utilizes inkjet printing to evaluate structure-property relationships of polymer/fullerene blends for the application in organic photovoltaics. Using this approach it is shown that optimized blend compositions as well as printing conditions lead to improved performances of organic solar cell devices.
Photovoltaic Loss Analysis of Inkjet-Printed Polymer Solar Cells Using Pristine Solvent Formulations
Macromolecular Symposia, 2010
We have recently reported inkjet-printed organic solar cells with a record power conversion efficiency of 3.5%. In this contribution, we present our first trials to process a functional active layer of a polymer:fullerene bulk-hetero junction solar cell by inkjet printing using tetralene as a solvent. Solar cells with the inkjet-printed active layer based on pristine tetralene show calibrated AM1.5 power conversion efficiency (PCE) of around 1.3% over comparable doctor bladed cells with PCE of 3.3%. Analysis in terms of one-diode equivalent circuit combined with current-voltage characteristics of the devices as a function of light intensity and voltage were performed to reveal the dominant loss mechanisms of the inkjet printed solar cells using tetralene solvent formulation. The loss analysis described in this paper helps us to identify the device performance limitations and to design methods to improve the performance of inkjet printed organic solar cells.
Synthetic Metals, 2017
Organic photovoltaic materials have the potential to revolutionize the solar energy industry as they are compatible with printing technologies that produce thin, flexible solar cells. In order for such material to be commercially viable, high power conversion efficiency (PCE) is necessary. The PCE of organic photovoltaic cells is largely determined by the material in the photoactive layer. Many different structures and types of organic materials for the active layer have been explored, such as benzodithiophene-based polymers and fused-ring ladder-type molecules. In recent years PCE values have neared or exceeded the theorized lower PCE limit of 10% for commercialization. In this review, the authors explore organic electron donors and acceptors that have been developed in the past 3 years (2013-2016) and have led to high-efficiency photovoltaic devices. Ultimately, the steadily climbing PCE values in recent years and variety of materials producing high PCEs points to a bright future for this area of solar energy.
Polymer-Fullerene Bulk-Heterojunction Solar Cells
Advanced Materials, 2009
Organic solar cells have the potential to be low-cost and efficient solar energy converters, with a promising energy balance. They are made from carbon-based semiconductors, which exhibit favourable light absorption and charge generation properties, and can be manufactured by low temperature processes such as printing from solvent-based inks, which are compatible with flexible plastic substrates or even paper. In this review, we will present an overview of the physical function of organic solar cells, their state-of-the-art performance and limitations, as well as novel concepts to achieve a better material stability and higher power conversion efficiencies. We will also briefly review processing and cost in view of the market potential.
Organic Electronics, 2010
Highly efficient and cost-effective polymer solar cells (PSCs) based poly(3-hexylthiophene) (P3HT) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6)C61 (PCBM) have been fabricated by inkjet-printing with various additives. All solution-processed layers in the solar cells-a poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) layer and a photoactive layer based on P3HT and PCBM with additives-were inkjet-printed. The device performance is strongly influenced by the addition of high boiling point additives in the photoactive ink with chlorobenzene (CB) solvent. The morphology, optoelectronic properties, and overall solar cell performance of the devices were dramatically affected by additives, such as 1,8 octanedithiol (ODT), o-dichlorobenzene (ODCB) and chloronaphthalene (Cl-naph). A device fabricated from ink formulated with ODT exhibited the best overall performance with power conversion efficiency (PCE) of 3.71%.