Characterisation and phase behaviour of phospholipid bilayers adsorbed on spherical polysaccharidic nanoparticles (original) (raw)

Structure and organization of phospholipid/polysaccharide nanoparticles

Journal of Physics-condensed Matter, 2008

In recent years nanoparticles and microparticles composed of polymeric or lipid material have been proposed as drug carriers for improving the efficacy of encapsulated drugs. For the production of these systems different materials have been proposed, among them phospholipids and polysaccharides due to their biocompatibility, biodegradability, low cost and safety. We report here a morphological and structural investigation, performed using cryo-TEM, static light scattering and small angle neutron and x-ray scattering, on phospholipid/saccharide nanoparticles loaded with a lipophilic positively charged drug (tamoxifen citrate) used in breast cancer therapy. The lipid component was soybean lecithin; the saccharide one was chitosan that usually acts as an outer coating increasing vesicle stability. The microscopy and scattering data indicate the presence of two distinct nanoparticle families: uni-lamellar vesicles with average radius 90 Å and multi-lamellar vesicles with average radius 440 Å. In both families the inner core is occupied by the solvent. The presence of tamoxifen gives rise to a multi-lamellar structure of the lipid outer shell. It also induces a positive surface charge into the vesicles, repelling the positively charged chitosan molecules which therefore do not take part in nanoparticle formation.

Structure and phase behavior of lipid suspensions containing phospholipids with covalently attached poly(ethylene glycol)

Biophysical Journal, 1995

Liposomes containing phospholipids with covalently attached poly(ethylene glycol) (PEG-lipids) are being developed for in vivo drug delivery. In this paper we determine the structure and phase behavior of fully hydrated distearoylphosphatidylcholine (DSPC) suspensions containing PEG-lipids composed of distearoylphosphatidylethanolamine with attached PEGs of molecular weights ranging from 350 to 5000. For DSPC:PEG-lipid suspensions containinj 0-60 mol % PEG-lipid, differential scanning calorimetry shows main endothermic transitions ranging from 55 to 640C, depending on the size of the PEG and concentration of PEG-lipid. The enthalpy of this main transition remains constant for all PEG-350 concentrations but decreases with increasing amounts of PEG-750, PEG-2000, or PEG-5000, ultimately disappearing at PEG-lipid concentrations greater than about 60 mol %. Low-angle and wide-angle x-ray diffraction show that tilted gel (L1') phase bilayers are formed for all PEG-lipid molecular weights at concentrations of about 10 mol % or less, with the distance between bilayers depending on PEG molecular weight and PEG-lipid concentration. At PEG-lipid concentrations greater than 10 mol %, the lipid structure depends on the size of the PEG moiety. X-ray diffraction analysis shows that untilted interdigitated (LAI) gel phase bilayers form with the incorporation of 40-100 mol % PEG-350 or 20-70 mol % PEG-750, and untilted gel (L13) phase bilayers are formed in the presence of about 20-60 mol % PEG-2000 and PEG-5000. Light microscopy, turbidity measurements, x-ray diffraction, and 1H-NMR indicate that a pure micellar phase forms in the presence of greater than about 60% PEG-750, PEG-2000, or PEG-5000.

Structural characterization (shape and dimensions) and stability of polysaccharide/lipid nanoparticles

Biopolymers, 1997

The structure of a new supramolecular drug carrier (named Biovectors-BV) was studied using light scattering and scanning electronic microscopy techniques. This system consists of a polysaccharide core of chemically cross-linked maltodextrins to which phospholipids (and, in some cases, cholesterol) are added. Both polysaccharide cores and BV crosslinked with phosphate (negatively charged) and epichlorhydrin (no net charge) are spherical particles. The increase in the ionic strength of the medium increases the density of the charged polysaccharide cores. The lipid strongly interacts with neutral and negatively charged cores, decreasing both intra-and interparticle interactions. The results (mainly, r Å R g /R h õ 0.775 in some cases) suggest that BV are gel-like particles of variable density, referred to as microgels or soft spheres. Neutral polysaccharides have a strong tendency to self-aggregate. This selfaggregation of polysaccharide neutral cores is prevented by the addition of lipid or dimethylsulfoxide.

Liposomes, Disks, and Spherical Micelles: Aggregate Structure in Mixtures of Gel Phase Phosphatidylcholines and Poly(Ethylene Glycol)Phospholipids

Biophysical Journal, 2003

Poly(ethylene glycol) (PEG) decorated lipid bilayers are widely used in biomembrane and pharmaceutical research. The success of PEG-lipid stabilized liposomes in drug delivery is one of the key factors for the interest in these polymer/lipid systems. From a more fundamental point of view, it is essential to understand the effect of the surface grafted polymers on the physical-chemical properties of the lipid bilayer. Herein we have used cryo-transmission electron microscopy and dynamic light scattering to characterize the aggregate structure and phase behavior of mixtures of PEG-lipids and distearoylphosphatidylcholine or dipalmitoylphosphatidylcholine. The PEG-lipids contain PEG of molecular weight 2000 or 5000. We show that the transition from a dispersed lamellar phase (liposomes) to a micellar phase consisting of small spherical micelles occurs via the formation of small discoidal micelles. The onset of disk formation already takes place at low PEG-lipid concentrations (\5 mol %) and the size of the disks decreases as more PEG-lipid is added to the lipid mixture. We show that the results from cryo-transmission electron microscopy correlate well with those obtained from dynamic light scattering and that the disks are well described by an ideal disk model. Increasing the temperature, from 258C to above the gel-to-liquid crystalline phase transition temperature for the respective lipid mixtures, has a relatively small effect on the aggregate structure.

Change of Multiple-Layered Phospholipid Vesicles Produced by Electrostatic Deposition of Polymers during Storage

International Journal of Food Engineering, 2016

In this study, 1 wt% lecithin (–), chitosan (+), and λ-carrageenan (–) were prepared to manufacture multiple-layered liposomes with optimal formulations developed in a previous study by using layer-by-layer electrostatic deposition. We observed their particle size, ζ-potential, sedimentation behavior, and microstructure for 6 weeks. Multiple-layered liposomes were quenched with calcein to evaluate stability in terms of factors such as encapsulation efficiency and released amount of calcein. The particle size of multi-layered liposomes increased with storage periods and the ζ-potential of multiple-layered liposomes gained a neutral charge. Interestingly, negatively charged layered liposomes were smaller than positively charged layered liposomes and showed a lower polydispersity index. Moreover, the ζ-potential did not apparently change compared to positively charged layered liposomes. For the calcein release study, multiple-layered liposomes significantly sustained quenched calcein m...

The Charge Properties of Phospholipid Nanodiscs

Biophysical journal, 2016

Phospholipids (PLs) are a major, diverse constituent of cell membranes. PL diversity arises from the nature of the fatty acid chains, as well as the headgroup structure. The headgroup charge is thought to contribute to both the strength and specificity of protein-membrane interactions. Because it has been difficult to measure membrane charge, ascertaining the role charge plays in these interactions has been challenging. Presented here are charge measurements on lipid Nanodiscs at 20°C in 100 mM NaCl, 50 mM Tris, at pH 7.4. Values are also reported for measurements made in the presence of Ca(2+) and Mg(2+) as a function of NaCl concentration, pH, and temperature, and in solvents containing other types of cations and anions. Measurements were made for neutral (phosphatidylcholine and phosphatidylethanolamine) and anionic (phosphatidylserine, phosphatidic acid, cardiolipin, and phosphatidylinositol 4,5-bisphosphate (PIP2)) PLs containing palmitoyl-oleoyl and dimyristoyl fatty acid chai...

Molecular and Mesoscopic Properties of Hydrophilic Polymer-Grafted Phospholipids Mixed with Phosphatidylcholine in Aqueous Dispersion: Interaction of Dipalmitoyl N-Poly(Ethylene Glycol) Phosphatidylethanolamine with Dipalmitoylphosphatidylcholine Studied by Spectrophotometry and Spin-Label Electr...

Biophysical Journal, 2000

Spin-label electron spin resonance (ESR) spectroscopy, together with optical density measurements, has been used to investigate, at both the molecular and supramolecular levels, the interactions of N-poly(ethylene glycol)-phosphatidylethanolamines (PEG-PE) with phosphatidylcholine (PC) in aqueous dispersions. PEG-PEs are micelle-forming hydrophilic polymer-grafted lipids that are used extensively for steric stabilization of PC liposomes to increase their lifetimes in the blood circulation. All lipids had dipalmitoyl (C16:0) chains, and the polymer polar group of the PEG-PE lipids had a mean molecular mass of either 350 or 2000 Da. PC/PEG-PE mixtures were investigated over the entire range of relative compositions. Spin-label ESR was used quantitatively to investigate bilayer-micelle conversion with increasing PEG-PE content by measurements at temperatures for which the bilayer membrane component of the mixture was in the gel phase. Both saturation transfer ESR and optical density measurements were used to obtain information on the dependence of lipid aggregate size on PEG-PE content. It is found that the stable state of lipid aggregation is strongly dependent not only on PEG-PE content but also on the size of the hydrophilic polar group. These biophysical properties may be used for optimized design of sterically stabilized liposomes.

Effects of phospholipid hydrolysis on the aggregate structure in DPPC/DSPE-PEG2000 liposome preparations after gel to liquid crystalline phase transition

Biochimica et Biophysica Acta (BBA) - Biomembranes, 2006

Upon storage of phospholipid liposome samples, lysolipids, fatty acids, and glycerol-3-phosphatidylcholine are generated as a result of acid-or base-catalyzed hydrolysis. Accumulation of hydrolysis products in the liposome membrane can induce fusion, leakage, and structural transformations of the liposomes, which may be detrimental or beneficial to their performance depending on their applications as, e.g., drug delivery devices. We investigated in the present study the influence of phospholipid hydrolysis on the aggregate morphology of DPPC/DSPE-PEG 2000 liposomes after transition of the phospholipid membrane from the gel phase to liquid crystalline phase using high performance liquid chromatography (HPLC) in combination with static light scattering, dynamic light scattering, and cryo-transmission electron microscopy (cryo-TEM). The rates of DPPC hydrolysis in DPPC/DSPE-PEG 2000 liposomes were investigated at a pH of 2, 4, or 6.5 and temperatures of 22°C or 4°C

Divalent cation-dependent interaction of sulfated polysaccharides with phosphatidylcholine and mixed phosphatidylcholine/phosphatidylglycerol liposomes

Chemistry and Physics of Lipids, 1994

The Ca2÷-dependent interaction of various polyanionic polysaccharides (chondroitin sulfate, heparin, dextran sulfate,/~-cyclodextrin sulfate, hyaluronic acid and carboxymethyldextran) with multilamellar dimyristoyl phosphatidylcholine (DMPC) liposomes was investigated by calorimetric and fluorescence spectroscopic measurements. It was found that an observed polysaccharide-induced phospholipid phase separation depends on the density of the sulfate groups along the polysaccharide chain independent of the presence of additional carboxyl groups. The phase separation resulting from the drastic dehydration of the covered membrane regions is monitored by the upward shift of the lipid phase transition and by the blue shift of the emission spectrum of a headgroup-dansylated phosphatidylethanolamine (DPE). This shift is only observable if the required polysaccharide chain length contains at least three glycosyl units. The Ca2÷-mediated interaction of dextran sulfate with various phosphatidylcholines, differing in their compressibility, showed the maximal difference between the phase transition tetnperatures of the lipid phase covered by the polysaccharide and the uneffected lipid domains for dielaidinoyl phosphatidylcholine (DEPC), the most compressible phospholipid investigated here. Mixed negatively charged DMPC/dimyristoyl phosphatidylglycerol (DMPG) liposomes were found to compete with the likewise negatively charged dextran sulfate for the binding of Ca 2÷. At excess Ca 2+ concentrations, the binding of the polysaccharide was strengthened, compared to pure DMPC liposomes. The monovalent cation sodium, was able to inhibit the interaction between the membrane surface and dextran sulfate. Various divalent cations were found to mediate the interaction, depending on their ionic radii and electron configuration. Within the second group of the periodic system Ca 2÷ is the most effective ion. However, within the horizontal forth period the ability to bind sulfated dextran to membrane surfaces decreases from Ca 2÷ to Ni 2+, but then increases again if Cu 2÷ or Zn 2+ was used as the mediating ion.