Web based management system for power quality assessment and detection of critical zones (original) (raw)
Related papers
A WEB-BASED SOLUTION FOR POWER QUALITY DATA MANAGEMENT
In this paper we present a web-based solution designed to convert (integrating an appropriate plugin) heterogeneous information provided by any type of power acquisition equipment into standard formats as PQDIF (Power Quality Data Interchange Format-IEEE® Std 1159.3-2003 standard). The power grid operators are interested for this kind of applications capable to convert huge volume of heterogeneous information into standard formats in order to be easily processed.
Electrical Engineering, 2013
This paper describes countrywide electrical power quality (PQ) assessments of the Turkish Electricity Transmission System through a genuine PQ database. The database stores the output of mobile PQ measurement systems which are established at 172 transformer substations of the transmission system. At 601 measurement points in these substations, which are potentially critical in terms of PQ, measurements are carried out by the mobile systems for a period of 1 week. PQ parameters defined in the IEC-61000-4-30 standard in addition to power values are calculated from acquired raw data by the mobile-monitoring system and the resulting data are transferred to the PQ database. The database, based on a novel PQ data model, enables its users to take PQ snapshots of the transmission system countrywide and can be accessed through several interfaces including a visual query interface, a natural language interface, and a map interface. The overall PQ status of the measured points, representing the characteristics of the transmission system, is assessed through these interfaces and problematic points are determined while deriving important conclusions about the transmission system's PQ behavior. Moreover, several novel PQ assessment methods are proposed and their applications on the PQ data are demonstrated especially through the map interface.
REAL TIME WEB BASED MONITORING OF POWER QUALITY PARAMETERS
Power quality (PQ) monitoring has become an essential service provided by utilities to their industrial and large commercial customers. This paper presents the development of a web based PQ monitoring instrument which incorporates real time monitoring of PQ parameters. Special software and hardware are considered in the system design for sampling, processing and transmitting of the real-time PQ events over Ethernet. The system hardware is based on a microcontroller which is programmed to sample real time voltage and current data, process the data using the fast Fourier transform and transmit the results to an end user through the web server. Experimental results prove that the microcontroller based system give good performance for real time PQ monitoring through the web.
MATEC Web of Conferences, 2018
The actual operation of the power distribution systems asks for high power quality (PQ). This fully justifies the investments in improving the metrics of power grid performances. But maintaining a PQ data infrastructure in a numerous locations is time-consuming and prohibitive. Moreover, each PQ monitor releases its own data format. These considerations justified using of a central PQ management system able to manipulate elliptical and time discontinuous information. The paper presents the characteristics of a webbased application designed to collect the data measured with different technologies of monitors and translate them into a common PQ data interchange format allowing comprehensive and long-duration grid operation assessment. The unitary formatted data generated by this customized software tool can be further processed by a proprietary software platform for PQ management owned by the network operator. The present version of this conversion tool is applicable only for one product family operating in the local power distribution grid. Further development is planned for integrating other two monitor vendors/families.
A web-based distributed measurement system for electrical power quality assessment
Measurement, 2010
Industries' systems are shifting toward almost entirely sophisticated electronic devices. Power Quality (PQ) analysis is getting importance for the economy because this equipment is highly sensitive to PQ events. Control and supervision of an industrial process has mainly been focused on the electrical protection, and little attention has been paid to the quality of the electrical supplies. Nowadays, measurement and communications systems have advanced to enable the installation of web-based sensors within a PQ assessment scenario. In this sense, this paper presents an innovative low-cost measurement system, as well as investigates the challenges and trends in the development of distributed PQ measurement systems using smart sensors.
Automated Power Quality Monitoring System for On-line Detection and Classification of Disturbances
2007 IEEE Instrumentation & Measurement Technology Conference IMTC 2007, 2007
This paper presents a system for detection and classification of power quality (PQ) voltage disturbances. The proposed system applies the following methods to detect and classify the PQ disturbances: digital filtering and mathematical morphology are used to detect and classify transients and waveform distortions, while in case of short and long duration disturbances (such as sags, swells and interruptions) the analysis of the RMS value of the voltage is employed. The decision and classification process is based on disturbances knowledge base of an expert system. The proposed approach identifies the type of the disturbance and its parameters such as time localization, duration and magnitude. The proposed system is suitable for on-line monitoring of the power system and for implementation in a digital signal processor (DSP).
Power Quality Management in Distribution Systems
Advanced Materials Research, 2014
In this paper, we propose a methodology to classify Power Quality (PQ) in distribution systems based on voltage sags. The methodology uses the KDD process (Knowledge Discovery in Databases) in order to establish a quality level to be printed in labels. The methodology was applied to feeders on a substation located in Curitiba, Parana, Brazil, considering attributes such as sag length (remnant voltage), duration and frequency (number of occurrences on a given period of time). On the Data Mining stage (the main stage on KDD Process), three different techniques were used, in a comparative way, for pattern recognition, in order to achieve the quality classification for the feeders: Artificial Neural Networks (ANN); Support Vector Machines (SVM) and Genetic Algorithms (GA). By printing a label with quality level information, utilities companies (power concessionaires) can get better organized for management and mitigation procedures by establishing clear targets. Moreover, the same way costumers already receive information regarding PQ based on interruptions, they will also be able to receive information based on voltage sags.
A New Approach To Online Power Quality Monitoring In Distribution Networks Over The Internet
2014
In this paper, two new and important topics in power quality are discussed. First issue is the online monitoring of power quality by using Internet, and the latter is making an online monitoring system for power quality in distribution networks. Components used in this device, so we have selected may be available in the Iran market. One of the interesting parts of the device is a tablet with connecting to the GPRS network. The point is that our proposed system with respect to all similar models could be distinguished, because the tablet beside all necessary tools (Such as GPS module, CPU, communication equipments for connecting to the Internet ...) has operating system, and there are special advantages in the operating system. After describing the system architecture, we have spoken about data collection and data analysis over the Internet. In addition, the software packages that can be used to analyze the online data and to implement the intelligent algorithms, have explained. For ...
Web Application for Power Grid Fault ManagementWeb application for power grid fault management
2016 6th International Conference on Intelligent and Advanced Systems (ICIAS), 2016
Smart power grids have been introduced in many developed countries and facilitate more efficient and economical utilization of generated power. The components of such a grid are usually remotely monitored and selected components are controlled either manually or through advanced software programs. However, many countries still rely on an Automated Meter Reading (AMR) network. AMR meters periodically report electrical energy consumption information to a centralized location and can also (since they contain batteries) transmit indications of power outage as well as power restoration. We make use of these meters to create a web application that examines and detects faults (blackouts, brownouts and surges) in an electrical grid. This application complements any existing sensor networks and software so that no new equipment needs to be implemented. Index Terms—Application Software; AMR; Fault Detection; Internet of Things; Smart Grids