Micro-, submicro- and nano-Si3N4 – SiC composites sintered by the HPHT method (original) (raw)
Microstructure and mechanical properties of SiC materials
Grzegorz Grabowski
2006
View PDFchevron_right
Nano/macro-hardness and fracture resistance of Si3N4/SiC composites with up to 13wt.% of SiC nano-particles
Zoltán Lenčéš
Journal of the European Ceramic Society, 2007
View PDFchevron_right
Processing and properties of pressureless-sintered Si 3N 4?SiC composites
Volkan Gunay, Stuart Hampshire
J Mater Process Technol, 1995
View PDFchevron_right
SiC/Si 3N 4 nano/micro-composite — processing, RT and HT mechanical properties
Pavol Hvizdos
Journal of The European Ceramic Society, 2000
View PDFchevron_right
Properties of SiC and Si3N4 based composite ceramic with nanosize component
Dmitriy Nesmelov
View PDFchevron_right
Mechanical Properties of Si3N4-SiC Three-Layer Composite Materials
Byung-Jin Choi
Journal of the American Ceramic Society, 2005
View PDFchevron_right
Rare-earth element doped Si3N4/SiC micro/nano-composites—RT and HT mechanical properties
Zoltán Lenčéš
Journal of the European Ceramic Society, 2010
View PDFchevron_right
Processing and properties of nanophase SiC/Si3N4 composites
Rajendra Bordia
Composites Part B: Engineering, 1999
View PDFchevron_right
Microstructure-flexural strength correlation and efficacy of rare earth nitrates on the sintering of SiCf/SiC composites
Pipit Fitriani
Journal of the European Ceramic Society, 2016
View PDFchevron_right
Enhanced toughness and reliability of Si3N4-SiCw composites under oscillatory pressure sintering
di an
Ceramics International, 2018
View PDFchevron_right
SiC-Based Composites Sintered with High Pressure Method
Piotr Klimczyk
View PDFchevron_right
Liquid phase sintering of Si3N4/SiC nanopowders derived from silica fume
Leon Shaw
Ceramics International, 2014
View PDFchevron_right
Microstructure and properties tailoring of liquid-phase sintered SiC
Ana Helena Bressiani
International Journal of Refractory Metals & Hard Materials, 2001
View PDFchevron_right
Comparative Evaluations and Microstructure: Mechanical Property Relations of Sintered Silicon Carbide Consolidated by Various Techniques
Arya Chatterjee
Metallurgical and Materials Transactions A, 2018
View PDFchevron_right
“Designing of Si3N4/SiC composite materials”
ricardo riedel
Nanostructured Materials, 1995
View PDFchevron_right
Nitridation of SiC for the production of SiC-Si3N4 Nanocomposites
I. Iturriza
Journal of the European Ceramic Society, 1994
View PDFchevron_right
Mechanical properties of reaction sintered SiC-TiC composite
Dusan Bucevac
Ceramics International, 2018
View PDFchevron_right
Effect of sintering temperature and siliconcarbide fraction on density, mechanical properties and fracture mode of alumina–silicon carbide micro/nanocomposites
Jalil Pourasad
Materials & Design, 2012
View PDFchevron_right
The influence of post-sintering HIP on the microstructure, hardness, and indentation fracture toughness of polymer-derived Al 2O 3–SiC nanocomposites
Peter Švančárek
Journal of The European Ceramic Society, 2007
View PDFchevron_right
Microstructures and Tensile Properties of Ultrafine-Grained Ni–(1–3.5) wt% SiCNP Composites Prepared by a Powder Metallurgy Route
Mohammed al-Maiyah
Acta Metallurgica Sinica (English Letters), 2015
View PDFchevron_right
The influence of different SiC amounts on the microstructure, densification, and mechanical properties of hot‐pressed Al2O3‐SiC composites
Mahdi Ghassemi Kakroudi
International Journal of Applied Ceramic Technology, 2019
View PDFchevron_right
Microstructure-fracture behavior correlation of toughened SiCf/SiC composites prepared by vacuum infiltration and hot pressing
Pipit Fitriani
Ceramics International, 2016
View PDFchevron_right
Mechanical Properties of Particulate Reinforced SiC-based Ceramic Composites
Masanori Ueki
ISIJ International, 1992
View PDFchevron_right
Preparation of a Si3N4/SiC nanocomposite by high-pressure sintering of polymer precursor derived powders
Julin Wan
Scripta Materialia, 2001
View PDFchevron_right
Effect of Mechanical Properties on Wear Resistance of Si3N4 – SiC Ceramic Composite
Zuzana Gábrišová
Advances in Science and Technology Research Journal, 2020
View PDFchevron_right
Silicon nitride/silicon carbide nanocomposite obtained by nitridation of SiC: fabrication and high temperature mechanical properties
F. Cambier
Journal of the European Ceramic Society, 2003
View PDFchevron_right
The influence of different SiC amounts on the microstructure, densification, and mechanical properties of hot‐pressed Al 2 O 3 ‐SiC composites
Mahdi Ghassemi Kakroudi
International Journal of Applied Ceramic Technology, 2019
View PDFchevron_right
Effects of post-sintering annealing on the microstructure and toughness of hot-pressed SiCf/SiC composites with Al2O3-Y2O3 additions
Pipit Fitriani
Ceramics International, 2017
View PDFchevron_right
Microstructure and fracture toughness of liquid-phase-sintered beta-SiC containing beta-SiC whiskers as seeds
Young-Wook Kim
Journal of Materials Science, 2003
View PDFchevron_right
Synthesis and Sintering of Ti3SiC2–SiC Composites through Reactive Hot-Pressing of TiC and Si Precursors
Mahdi Ghassemi Kakroudi
Silicon, 2021
View PDFchevron_right
Effect of sintering additives and reinforcement on microhardness values of Si 3 N 4 ceramics and composites
Prof Mohammad Farooq Wani
Journal of Advanced Research …, 2010
View PDFchevron_right
Effect of addition of SiC particles on the Microstructure and Hardness of Al-SiC composite
Saleemsab Doddamani
Metallurgical and Materials Engineering, 2021
View PDFchevron_right
Effect of Sintering Temperature on the Grain Size and Mechanical Properties of Al2O3-SiC Nanocomposites
Alireza Moradkhani
Journal of the Korean Ceramic Society, 2019
View PDFchevron_right
Effect of Production Route on the Microstructure and Mechanical Properties of Cu–SiC _{\mathrm{p}}$$ p Composites
zulkuf balalan
Arabian Journal for Science and Engineering, 2018
View PDFchevron_right
Silicon nitride based nanocomposites produced by two different sintering methods
Katalin Balazsi
Ceramics International, 2011
View PDFchevron_right