Development & Synthesis of Nickel-Nylon Smart Nanocomposites (original) (raw)
Related papers
A Review on Nano-particles and Nano-composites for Aerospace Application
The paper states about the technological revolution development of automotive and aerospace industry exhibiting place for nano-particles and nano-composites. The article provides generalized conclusion of the characterization and properties of the nano-particles and the nano-composites based on ongoing research worldwide. These are thought of as high performance materials of the 21st century with unusual property combinations and unique design possibilities. With an estimated annual growth rate of about 25% and huge demand for engineering polymers, they have promising potential for future aircraft and automation in several applications like developing nano-mechanical and nano-electrical equipment. The improved mechanical properties of nano-composites like value of Young's modulus compared to carbon fiber and metallic alloy have resulted in major interest to strengthen and toughen conventional aircraft structures and gas turbine engines. In addition the ongoing research of nanotechnology has justified promising immense possibilities in nano-electronics and optoelectronic applications as well as fuel cell application.
Nanomaterials: Opportunities and Challenges for Aerospace
2005
: Nanomaterials are regarded world-wide as key materials of the 21st Century. Also, in aerospace a high potential for nanomaterials applications is postulated and technological breakthroughs are expected in this area. In this context, improvements based on these materials are to be considered both in a short to medium-term time scale as well as on a long-term basis in view of different prospective studies. Some applications are feasible in a short to medium-term time horizon like: (a) lightweight and mechanically outstanding structures based on nanocomposites, especially for harsh environments and high temperatures; (b) improved and smaller systems and controls based on microsensors, on smart nanomaterials, and/or on embedded actuators for on-line monitoring, self-calibration, self-regulation, or self-healing applications; (c) Thermal and mechanical protection layers with outstanding tribological characteristics for engine or landing gear parts made of nanostructured materials; (d) ...
Nanocomposites as Advanced Materials for Aerospace Industry
INCAS BULLETIN, 2012
Polymer nanocomposites, consisting of nanoparticles dispersed in polymer matrix, have gained interest due to the attractive properties of nanostructured fillers, as carbon nanotubes and layered silicates. Low volume additions (1-5%) of nanoparticles provide properties enhancements comparable to those achieved by conventional loadings (15-40%) of traditional fillers. Structural nanocomposites represent reinforcement structures based on carbon or glass fibers embedded into polymeric matrix modified with nanofillers. Structural composites are the most important application of nanaocomposites, in aerospace field, as, laminates and sandwich structures. Also, they can by used as anti-lightning, anti-radar protectors and paints. The paper presents the effects of sonic dispersion of carbon nanotubes and montmorrilonite on the mechanical, electrical, rheological and trybological properties of epoxy polymers and laminated composites, with carbon or glass fiber reinforcement, with nanoadditivated epoxy matrix. One significant observation is that nanoclay contents higher than 2% wt generate an increase of the resin viscosity, from 1500 to 50000-100000 cP, making the matrix impossible to use in high performance composites. Also, carbon nanotubes provide the resin important electrical properties, passing from dielectric to semi-conductive class. These effects have also been observed for fiber reinforced composites. Contrarily to some opinions in literature, the results of carbon nanotubes or nanoclays addition on the mechanical characteristics of glass or carbon fiber composites seem to be rather low.
Strong thermoplastic elastomers created using nickel nanopowder
Polymer Bulletin, 2000
We have decided to investigate whether addition of nickel (Ni) to a thermoplastic elastomer (TPE) will make TPE properties better for demanding applications. We have found that Ni particles moved well during low (100 °C) temperature blending, with the polymer providing more uniform particle dispersion. In contrast, at 160 °C, lower viscosity prevented particle dispersion and supported Ni agglomerations. All samples processed
ChemEngineering, 2020
The electrospun fibers of poly(vinyl pyrrolidone) (PVP)-nickel acetate (Ni(CH 3 COO) 2 •4H 2 O) composite were successfully prepared by using sol-gel processing and electrospinning technique. Nickel oxide (NiO) nanofibers were obtained afterwards by high temperature calcinations of the precursor fibers, PVP/Ni acetate composite nanofibers, at 700 • C for 10 h. Following with the reduction of NiO nanofibers at 400 • C using hydrogen gas (H 2) under inert atmosphere, the metallic nickel (Ni) nanofibers were subsequently produced. In addition, as-prepared Ni nanofibers were chemically coated with silver (Ag) nanoparticles to enhance their electrical property and prevent the surface oxidation. The characteristics of as-prepared fibers, such as surface morphology, fiber diameters, purity, the amount of NiO nanofibers, and metal crystallinity, were determined using a scanning electron microscope (SEM), a Fourier transform infrared spectrometer (FT-IR), a thermogravimetric analyzer (TGA), and a wide-angle x-ray diffractometer (WAXD). The volume resistivity of epoxy nanocomposite filled with Ag-coated short Ni nanofibers was lower than the one containing short Ni nanofibers with no coating due to the synergetic effect of Ag nanoparticles created during the coating process. We also demonstrated that the volume resistivity of epoxy nanocomposite filled with Ni nanofibers could be dramatically decreased by using Ni nanofibers in the non-woven mat form due to their small fiber diameter and high fiber aspect ratio, which yield a high specific surface area, and high interconnecting network.
The Use of Polymer Nanocomposites in the Aerospace and the Military/Defence Industries
Polymer Nanocomposites for Advanced Engineering and Military Applications
Previously, applications of composites were limited to the military aerospace. This is because civilian aircraft with composites inclusions was considered to be too expensive. The use of composite in aircrafts, instead of steel, has resulted in lightweight aircraft structures and has consequently reduced the level of fuel consumption and costs of fuel, thereby reducing CO2 emissions. Undoubtedly, nanocomposites applications abound in several aspects of human life and the use of nanoparticle in materials dates back to the understanding of the nature of these materials. This chapter will focus on the use of nanopolymers in the aerospace and in the military. Particular attention will be given to nano military weapons, nanocoating for military applications, nanotechnology for military drones, nanotechnology in military suits, gloves, boots and nanotechnology in armored military vehicles, aircraft, and military ships and in military medicine.
Nickel-carbon nanocomposites: Synthesis, structural changes and strengthening mechanisms
Acta Materialia
The present work investigates Ni-nanodiamond and Ni-graphite composites produced by mechanical synthesis and subsequent heat treatments. Processing of nickel-carbon nanocomposites by this powder metallurgy route poses specific challenges, as carbon phases are prone to carbide conversion and amorphization. The processing window for carbide prevention has been established through X-ray diffraction by a systematic variation of the milling parameters. Transmission electron microscopy confirmed the absence of carbide and showed homogeneous particle distributions, as well as intimate bonding between the metallic matrix and the carbon phases. Ring diffraction patterns of chemically extracted carbon phases demonstrated that milled nanodiamond preserved crystallinity, while an essentially amorphous nature could be inferred for milled graphite. Raman spectra confirmed that nanodiamond particles remained largely unaffected by mechanical synthesis, whereas the bands of milled graphite were significantly changed into the typical amorphous carbon fingerprint. The results on the annealed nanocomposites showed that milling with Ni accelerated graphitization of the carbon phases during heat treatments at 973 and 1073 K in both composites. At the finer scales, the nanocomposites exhibited a remarkable microhardness enhancement ($70%) compared with pure nanostructured nickel. The Hall-Petch relation and the Orowan-Ashby equation are used to discuss strengthening mechanisms and the load transfer ability to the reinforcing particles.
Nanocomposites: Technologically Advanced Material for Wide Engineering Applications
Current Nanomaterials, 2017
Background: Since the available metals are not able to meet the desired structural, mechanical and electrochemical properties therefore composites and nanocomposites are being used now a days. Composites are an amalgamation of materials that are mixed together to develop new compound with special and superior properties as compared to the base material. Nanocomposite is a new approach in which out of two phase, any one phase should consist of single unit sized particle whose dimension lies in between 1 and 1000 nanometres (nm) but usually it lies between 1-100 nm Objective: The present paper provides an overview on the different types of nanocomposites, their manufacturing, mechanical behaviour & industrial applications. Method: Gupta et al. synthesized iron (Fe)-alumina (Al 2 O 3) metal matrix nanocomposites synthesized via powder metallurgy technique. Composition selected for the study was in the range of 5-30wt% of Al 2 O 3 in Fe matrix. Specimens were synthesized by ball milling, compaction and sintering in argon atmosphere in temperature range of 900-1100°C for 1 to 3 hour respectively. Results: It was found that due to reactive sintering between iron and alumina particles an iron aluminate (FeAl 2 O 4) phase forms. Formation of nano iron aluminate phases and related properties also depend on processing parameters. It was also found that the mechanical and electrochemical properties varies with the sintering parameters which in turn depend upon the iron aluminate phase formation. Conclusion: Metal Matrix Nanocomposites are excellent for manufacturing materials having high strength in the case of shear & compression processes and have ability to work at elevated temperature.
Structural and Magnetic Properties of Nickel Oxide Nanopowders
Trends in Magnetism, 2011
Method viscometry and rheological studied the kinetics of crosslinking (vulcanization) of the unsaturated nitrile-butadiene elastomers (NBR) in the presence of nanosized metal oxide powders (ZnO, Al 2 O 3 , ZrO 2). The activating ability of nanoscale metal oxide powders depends not only on particle size but also on the type of elastomer used, as well as on the type of crosslinking agent disulfochloridebenzene (DSCB). Therefore, it was of interest to elucidate the role of nanosized metal oxide powders that differ in activity by crosslinking NBR elastomer with DSCB. It has been shown that crosslinking NBR with DSCB activating effect of metal oxides is accomplished by comparing the crosslinking defined by a change in the Mooney viscosity and the number of cross-linking and change of carbon elastomeric gel. It was found that, the properties of vulcanizates based on designed mixtures NBR, when applying the radiation-chemical technology allows obtaining a vulcanizate containing sulfide, sulfur and carbon-carbon bonds provides elastomer with high strength and dynamic characteristics.
Polymer Nanocomposites for Advanced Engineering and Military Applications
Previously, applications of composites were limited to the military aerospace. This is because civilian aircraft with composites inclusions was considered to be too expensive. The use of composite in aircrafts, instead of steel, has resulted in lightweight aircraft structures and has consequently reduced the level of fuel consumption and costs of fuel, thereby reducing CO 2 emissions. Undoubtedly, nanocomposites applications abound in several aspects of human life and the use of nanoparticle in materials dates back to the understanding of the nature of these materials. This chapter will focus on the use of nanopolymers in the aerospace and in the military. Particular attention will be given to nano military weapons, nanocoating for military applications, nanotechnology for military drones, nanotechnology in military suits, gloves, boots and nanotechnology in armored military vehicles, aircraft, and military ships and in military medicine.