Thermal Characterisation of Thermotropic Nematic Liquid-Crystalline Elastomers (original) (raw)
Related papers
Thermal and Mechanical Properties of New Main-Chain Liquid-Crystalline Elastomers
Mol. Cryst. Liq. Cryst., 2009
New Main-Chain Liquid-Crystalline Elastomers (MCLCEs) were synthesised based on reacting vinyloxy-terminated mesogens under hydrosilylation conditions with a flexible crosslinker. These main-chain systems showed smectic and nematic mesophases and their anisotropic properties were mechanically and thermally analysed as a function of the crosslinking density. Due to the suitable chemistry used in this work low crosslinking densities have been achieved (2.5mol-%) with low soluble content (5%). For the first time, the degree of crosslinking could be adjusted and nematic or smectic MCLCEs with tuneable thermal and mechanical properties were obtained.
Physical review. E, Statistical, nonlinear, and soft matter physics, 2001
We study three monodomain (single-crystal) nematic elastomer materials, all side-chain siloxane polymers with the same mesogenic groups but with different types of crosslinking: (i) short flexible siloxane linkage affine to the network backbone, (ii) short flexible aliphatic crosslinks miscible with mesogenic side chain groups, and (iii) long segments of main-chain nematic polymer. Equilibrium physical properties of these three systems are very different, especially the spontaneous thermal expansion and anisotropic stress-strain response along and perpendicular to the uniform nematic director. In the latter case, we examine the soft elastic plateau during the director reorientation. We compare the nematic order-parameter Q(T), provided primarily by the side mesogenic groups and relatively constant between the samples, and the average backbone chain anisotropy r(T)=l( parallel)/l( perpendicular), which is strongly affected by the crosslinking geometry. The experimental data is compar...
Thermal Characterization of Nematic Liquid Crystal Elastomer
We have synthesized and characterized thermal properties of Nematic Liquid Crystal Elastomer (NLCE) using Polarizing Microscopy Studies (PMS), Differential Scanning Calorimetry (DSC) and Thermo gravimetric Analysis (TGA). The synthesis of NLCE was confirmed by Fourier Transform Infrared (FTIR) Spectroscopy. The NLCE used in the present study, has a unique coupling between the anisotropic order of Liquid crystal components and elasticity of polymer network. The investigations revealed that there is a spontaneous change of the NLCE at nematic – isotropic transition, which gives a flexing effect, when the material is pinned on the substrate. This shows that this synthesized material can be used for large number of biological applications.
Polymer, 2009
Photoactive materials based on azobenzene derivatives exhibit interesting properties related to the reversible photo-isomerisation between the trans and cis isomers of the azo-compound. In this work we report the preparation and physical-chemical characterization of Liquid Single Crystal Elastomers (LSCEs) containing azobenzene derivative side-chain mesogens as co-monomer. The interplay between the orientational ordering and mechanical response in the nematic phase is investigated by thermomechanical measurements as well as by deuteron NMR spectroscopy. We demonstrate that local nematic order can be reliably probed in azo-LSCEs using low molar mass deuterated cyanobiphenyl nematogen in low concentrations. No phase separation of the dopant is observed. The nematoelastic coupling e av ðTÞfS av ðTÞ between the effective sample deformation and average nematic order parameter is present over a wide temperature range even in the systems with relatively large heterogeneity of the nematic order and misaligned nematic domains.
Liquid-Crystalline Elastomers: Thermally and Optically Effected Ordering
International Meeting on Information Display, 2005
The nature of the phase transition in nematic liquid crystalline elastomer is investigated using NMR and calorimetry. The balance between ordering and disordering effects of the polymer network is identified as crucial for the behavior of the order parameter near the phase transition. The change from supercritical to critical regime with adding low molecular weight liquid crystal to the elastomer is proven.
Study of the optical, thermal, and mechanical properties of nematic liquid crystal elastomers
Journal of Information Display, 2016
In the present study, the optical, thermal, and mechanical properties of liquid crystal elastomers (LCEs) were investigated using various techniques. The presence of functional groups in LCE was studied using Fourier transform infrared spectroscopy. The phase transition temperatures were confirmed via polarizing optical microscopy and Fabry-Perot scattering studies. The differential thermal analysis was used for investigating the thermal behavior. A dynamic mechanical analysis was used to study the mechanical properties of LCE. The significant mechanical changes with a considerable reversible effect were observed for this soft material. The changes in the mechanical shape with the temperature are attributed to the change in the phase of the LCE material.
Mechanical Properties of New Main-Chain Liquid-Crystalline Elastomers
Solid State Sci., 2010
New Main-Chain Liquid-Crystalline Elastomers (MCLCEs) were synthesized based on reacting vinyloxy-terminated mesogens under hydrosilylation conditions with a flexible crosslinker. These main-chain systems showed smectic and nematic mesophases and their anisotropic properties were mechanically and thermally analysed as a function of the crosslinking density. Due to the suitable chemistry used in this work low crosslinking densities have been achieved (2.5 mol-%) with low soluble content (5%). For the first time, the degree of crosslinking could be adjusted and nematic or smectic MCLCEs with tuneable thermal and mechanical properties were obtained.
Environmentally Stable Chiral-Nematic Liquid-Crystal Elastomers with Mechano-Optical Properties
Applied Sciences
Chiral-nematic liquid crystal (N* LC) elastomers exhibit mechano-optical responsive behavior. However, practical sensor applications have been limited by the intrinsic sensitivity of N* LC elastomers to environmental conditions, such as temperature. Although densely cross-linked LC network polymers exhibit high thermal stability, they are not proper for the mechanical sensor due to high glass transition temperatures and low flexibility. To overcome these issues, we focused on enhancing thermal stability by introducing noncovalent cross-linking sites via intermolecular interactions between LC molecules bonded to the polymer network. N* LC elastomers with a cyanobiphenyl derivative as a side-chain mesogen exhibited mechano-optical responsive behavior, with a hypsochromic shift of the reflection peak wavelength under an applied tensile strain and quick shape and color recovery owing to high elasticity. Notably, the N* LC elastomers showed high resistance to harsh environments, includin...
Thermomechanical properties of tri-functionally crosslinked liquid single crystal elastomers
Chemical Physics Letters, 2006
We have investigated thermo-mechanical properties and optical birefringence of the V3 cross-linker liquid single crystal elastomers (V3LSCEs) with different concentrations of the flexible tri-functional cross-linker as a function of temperature. The length of V3LSCEs along the directorn shrinks on heating while it expands perpendicular ton. Drastic length changes as well as large variations in the optical birefringence, Dn, are observed near T c . The maximum contraction increases with increasing cross-linking concentration. When the anisotropy of the shape change is plotted as a function of Dn, a linear dependence is observed only deep in the nematic phase for larger cross-linking concentrations.