The Effect of Co-Substrate Feeding on Polyhydroxyalkanoate (PHA) Homopolymer and Copolymer Production in Recombinant Escherichia coli LS5218 (original) (raw)
Related papers
ACS Sustainable Chemistry & Engineering, 2014
Polyhydroxyalkanoates (PHAs) are biorenewable and biodegradable polyesters that have garnered attention as alternatives to more common petroleum-based polymers. One of the current limitations for the widespread use of PHAs is the inability to produce PHA polymers with desired material properties. Previous studies have shown that PHA copolymers consisting primarily of one short-chain-length (SCL) repeating unit and a small concentration of medium-chain-length (MCL) repeating units have physical properties resembling the petroleum-based plastic polyethylene. In addition, these SCL-co-MCL PHA copolymers have been investigated for biomedical applications such as tissue engineering. However, bacterial production of these SCL-co-MCL PHA copolymers is often at a much lower yield compared to SCL PHA biosynthesis produced from simple sugars such as glucose. Here, we report the highest yield to date of SCL-co-MCL PHA copolymers produced from glucose. Two separate biosynthetic pathways for SCL and MCL PHAs were introduced into Escherichia coli LS5218, and copolymer production experiments were carried out in batch fermentations. The PHA copolymers produced consisted of repeating units with 4, 6, 8, 10, and 12 carbons at mol % concentrations similar to that of other SCL-co-MCL PHA copolymers reported to have desirable physical properties. The PHA repeating unit compositions, structures, and linkages between individual repeating unit types were analyzed by GC and NMR. The thermal properties of purified PHA copolymers were also examined. The engineered strain developed in this study (E. coli LS5218-STQKABGK) provides a platform to further increase PHA copolymer yields from unrelated carbon sources in a non-native PHA producing bacterial strain.
Journal of Biotechnology, 2007
One of the main limitations in bacterial polyhydroxyalkanoate (PHA) production with mixed cultures is the fact that primarily polyhydroxybutyrate (PHB) homopolymers are generated from acetate as the main carbon source, which is brittle and quite fragile. The incorporation of different 3-hydroxyalkanoate (HA) components into the polymers requires the addition of additional carbon sources, leading to extra costs and complexity. In this study, the production of poly(3-hydroxybutyrate (3HB)-co-3-hydroxyvalerate (3HV)-co-3-hydroxy-2-methylvalerate (3HMV)), with 7-35 C-mol% of 3HV fractions from acetate as the only carbon source was achieved with the use of glycogen accumulating organisms (GAOs). An enriched GAO culture was obtained in a lab-scale reactor operated under alternating anaerobic and aerobic conditions with acetate fed at the beginning of the anaerobic period. The production of PHAs utilizing the enriched GAO culture was investigated under both aerobic and anaerobic conditions. A polymer content of 14-41% of dry cell weight was obtained. The PHA product accumulated by GAOs under anaerobic conditions contained a relatively constant proportion of non-3HB monomers (30 ± 5 C-mol%), irrespective of the amount of acetate assimilated. In contrast, under aerobic conditions, GAOs only produced 3HB monomers from acetate causing a gradually decreasing 3HV fraction during this aerobic feeding period. The PHAs were characterized by gel permeation chromatography (GPC) and differential scanning calorimetry (DSC). The data demonstrated that the copolymers possessed similar characteristics to those of commercially available poly(3HB-co-3HV) (PHBV) products. The PHAs produced under solely anaerobic conditions possessed lower melting points and crystallinity, higher molecular weights, and narrower molecular-weight distributions, compared to the aerobically produced polymers. This paper hence demonstrates the significant potential of GAOs to produce high quality polymers from a simple and cheap carbon source, contributing considerably to the growing research body on bacterial PHA production by mixed cultures.
Indian Journal of Microbiology, 2009
Rhizobium meliloti produced a copolymer of short chain length polyhydroxyalkanoate (scl-PHA) on sucrose and rice bran oil as carbon substrates. Recombinant Escherichia coli (JC7623ABC1J4), bearing PHA synthesis genes, was used to synthesize short chain length-co-medium chain length PHA (scl-co-mcl-PHA) on glucose and decanoic acid. Fourier transform infrared spectroscopy (FTIR) spectra of the PHAs indicated strong characteristic bands at 1282, 1723, and 2934 cm−1 for scl-PHA and at 2933 and 2976 cm−1 for scl-co-mcl-PHA polymer. Differentiation of polyhydroxybutyrate (PHB) and polyhydroxybutyrate-co-hydroxyvalerate-P(HB-co-HV) copolymer was obseverd using FTIR, with absorption bands at 1723 and 1281 for PHB, and at 1738, 1134, 1215 cm−1 for HV-copolymer. The copolymers were analyzed by GC and 1H NMR spectroscopy. Films of polymer blends of PHA produced by R. meliloti and recombinant E. coli were prepared using glycerol, polyethylene glycol, polyvinyl acetate, individually (1:1 ratio), to modify the mechanical properties of the films and these films were evaluated by FTIR and scanning electron microscopy.
Biomacromolecules, 2004
Polyhydroxyalkanoates (PHAs) are biodegradable polyesters that have a wide variety of physical properties dependent on the lengths of the pendant groups of the monomer units in the polymer. PHAs composed of mostly short-chain-length (SCL) monomers are often stiff and brittle, whereas PHAs composed of mostly medium-chain-length (MCL) monomers are elastomeric in nature. SCL-MCL PHA copolymers can have properties between the two states, dependent on the ratio of SCL and MCL monomers in the copolymer. It is desirable to elucidate new and low cost ways to produce PHA composed of mostly SCL monomer units with a small mol % of MCL monomers from renewable resources, since this type of SCL-MCL PHA copolymer has superior qualities compared to SCL homopolymer. To address this issue, we have created strains of recombinant E. coli capable of producing -ketothiolase (PhbA) and acetoacetyl-CoA synthase (PhbB) from Ralstonia eutropha, genetically engineered 3-ketoacyl-ACP synthase III (FabH) from Escherichia coli, and genetically engineered PHA synthases (PhaC) from Pseudomonas sp. 61-3 to enhance the production of SCL-MCL PHA copolymers from glucose. The cumulative effect of having two monomer-supplying pathways and genetically engineered PHA synthases resulted in higher accumulated amounts of SCL-MCL PHA copolymer from glucose. Polymers were isolated from two recombinant E. coli strains, the first harboring the phbAB, fabH(F87T), and phaC1(SCQM) genes and the second harboring the phbAB, fabH(F87W), and phaC1(SCQM) genes. The thermal and physical properties of the isolated polymers were characterized. It was found that even a very low mol % of MCL monomer in a SCL-MCL PHA copolymer had dramatic effects on the thermal properties of the copolymers.
We synthesized poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3-HB-co-3-HV)] copolymer having different contents of 3- hydroxyvalerate (3-HV) units (16.04, 16.3, 24.95, 25.62, and 16.52 mol % 3-HV) with different yields of polyhydroxyalkanoates (PHAs) by feeding with different cooking oils and with Alkaliphilus oremlandii OhILAs strain. The PHA production efficiency of the Alkaiphilus strain was compared with that of the control strain, Bacillus cereus. The synthesis of each PHA biopolymer was performed with different toxic spent oils as the sole carbon source in an oil-in-water-based microemulsion medium. We observed that the productivity of the poly(3- hydroxybutyrate) [P(3-HB)] copolymer from the Alkaliphilus strain was higher than those of the PHAs isolated from B. cereus and the Escherichia coli XL1B strain. The synthesized PHA copolymers were characterized by 1H-NMR and Fourier transform infrared (FTIR) spectroscopy. In the 1H-NMR spectra, a doublet resonance peak at 1.253 ppm of the/ methyl protons of the 3-hydroxybutyrate (3-HB) side group and one at 0.894 ppm due to the methyl protons of the 3-HV side group indicated the presence of 3-HB and 3-HV units in the copolymer. The chemical shift values at 1.25 and 2.2 ppm, due to the resonance absorption peaks of the methyl protons and methylene protons, confirmed the synthesis of the P(3-HB) homopolymer. From the FTIR spectra, a strong C@O stretching frequency in the range of 1745–1727 cm21, together with strong CAO stretching bands near 1200 cm21 and a strong band near 3400 cm21, confirmed the synthesis of P(3-HB-co-3-HV) and P(3-HB). Thus, waste cooking oil as a substrate provided an alternate route for the formation of P(3-HB-co-3- HV) and P(3-HB) by Alkaliphilus and E. coli strains, respectively
Journal of Biotechnology, 1997
A recombinant Escherichia coli strain has been developed that produces poly(3-hydroxybutyrate-co-4-hydroxybutyrate) when grown in complex medium containing glucose. This has been accomplished by introducing into E. coli DH5h separate plasmids harboring the polyhydroxyalkanoate (PHA) biosynthesis genes from Ralstonia eutropha (formerly named Alcaligenes eutrophus) and the succinate degradation genes from Clostridium kluy6eri, respectively. Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) levels reached 50% of the cell dry weight and contained up to 2.8 mol.% 4-hydroxybutyrate. The molecular weight of the polymer was 1.8 ×10 6 . © 1997 Elsevier Science B.V.
Applied and Environmental Microbiology, 2004
Polyhydroxyalkanoates (PHAs) can be divided into three main types based on the sizes of the monomers incorporated into the polymer. Short-chain-length (SCL) PHAs consist of monomer units of C 3 to C 5 , mediumchain-length (MCL) PHAs consist of monomer units of C 6 to C 14 , and SCL-MCL PHAs consist of monomers ranging in size from C 4 to C 14 . Although previous studies using recombinant Escherichia coli have shown that either SCL or MCL PHA polymers could be produced from glucose, this study presents the first evidence that an SCL-MCL PHA copolymer can be made from glucose in recombinant E. coli. The 3-ketoacyl-acyl carrier protein synthase III gene (fabH) from E. coli was modified by saturation point mutagenesis at the codon encoding amino acid 87 of the FabH protein sequence, and the resulting plasmids were cotransformed with either the pAPAC plasmid, which harbors the Aeromonas caviae PHA synthase gene (phaC), or the pPPAC plasmid, which harbors the Pseudomonas sp. strain 61-3 PHA synthase gene (phaC1), and the abilities of these strains to accumulate PHA from glucose were assessed. It was found that overexpression of several of the mutant fabH genes enabled recombinant E. coli to induce the production of monomers of C 4 to C 10 and subsequently to produce unusual PHA copolymers containing SCL and MCL units. The results indicate that the composition of PHA copolymers may be controlled by the monomer-supplying enzyme and further reinforce the idea that fatty acid biosynthesis may be used to supply monomers for PHA production.
Polymers, 2020
Aneurinibacillus sp. H1 is a promising, moderately thermophilic, novel Gram-positive bacterium capable of the biosynthesis of polyhydroxyalkanoates (PHA) with tunable monomer composition. In particular, the strain is able to synthesize copolymers of 3-hydroxybutyrate (3HB), 4-hydroxybutyrate (4HB) and 3-hydroxyvalerate (3HV) with remarkably high 4HB and 3HV fractions. In this study we performed an in-depth material analysis of PHA polymers produced by Aneurinibacillus sp. H1 in order to describe how the monomer composition affects fundamental structural and physicochemical parameters of the materials in the form of solvent-casted films. Results of infrared spectroscopy, X-ray diffractometry and thermal analysis clearly show that controlling the monomer composition enables optimization of PHA crystallinity both qualitatively (the type of the crystalline lattice) and quantitatively (the overall degree of crystallinity). Furthermore, resistance of the films against thermal and/or enzym...