Disposable Nucleic Acid Biosensors Based on Gold Nanoparticle Probes and Lateral Flow Strip (original) (raw)
Related papers
Talanta, 2008
Biosensors have witnessed an escalating interest nowadays, both in the research and commercial fields. Deoxyribonucleic acid (DNA) biosensors (genosensors) have been exploited for their inherent physicochemical stability and suitability to discriminate different organism strains. The main principle of detection among genosensors relies on specific DNA hybridization, directly on the surface of a physical transducer. This review covers the main DNA immobilization techniques reported so far, new microand nanotechnological platforms for biosensing and the transduction mechanisms in genosensors. Clinical applications, in particular, demand large-scale and decentralized DNA testing. New schemes for DNA diagnosis include DNA chips and microfluidics, which couples DNA detection with sample pretreatment under in vivo-like hybridization conditions. Higher sensitivity and specificity may arise from nanoengineered structures, like carbon nanotubes (CNTs) and DNA/protein conjugates. A new platform for universal DNA biosensing is also presented, and its implications for the future of molecular diagnosis are argued.
DNA Based Biosensors for Detection of Pathogens
Biosensor is a quick analytical device and plays an important role in daily life. In last few decades, biosensors have been increasingly used for monitoring of biological and synthetic processes used in industrial and clinical chemistry. Biosensor is becoming popular in the field of food analysis (
Vitae, 2021
BACKGROUND : Biosensing techniques have been the subject of exponentially increasing interest due to their performance advantages such as high selectivity and sensitivity, easy operation, low cost, short analysis time, simple sample preparation, and real-time detection. Biosensors have been developed by integrating the unique specificity of biological reactions and the high sensitivity of physical sensors. Therefore, there has been a broad scope of applications for biosensing techniques, and nowadays, they are ubiquitous in different areas of environmental, healthcare, and food safety. Biosensors have been used for environmental studies, detecting and quantifying pollutants in water, air, and soil. Biosensors also showed great potential for developing analytical tools with countless applications in diagnosing, preventing, and treating diseases, mainly by detecting biomarkers. Biosensors as a medical device can identify nucleic acids, proteins, peptides, metabolites, etc.; these anal...
Nucleic acid based biosensors: The desires of the user
Bioelectrochemistry, 2005
The need for nucleic acid based diagnostic tests has increased enormously in the last few years. On the one hand, this has been stimulated by the discovery of new hereditary genetic disease loci following the completion of the Human Genome Project, but also by the presence of new rapidly spreading viral threats, such as that of the SARS epidemic, or even micro-organisms released for the purpose of biological warfare. As in many instances rapid diagnoses of specific target genetic loci is required, new strategies have to be developed, which will allow this to be achieved directly at the point-of-care setting. One of these avenues being explored is that of biosensors. In this review, we provide an overview of the current state of the art concerning the high-throughput analysis of nucleic acids, and address future requirements, which will hopefully be met by new biosensor-based developments. D
Recent Advances on DNA Biosensors
International Journal of Environmental Analytical Chemistry, 2001
The determination of low-molecular weight compounds with affinity for DNA was measured by their effect on the oxidation signal of the guanine peak of calf thymus immobilized on the electrode sensor and investigated by chronopotentiometric analysis. The DNA biosensor is able to detect known intercalating and groove binding compounds. Detection limits of 0.3, 0.2, 10 mgl-1 were obtained for daunomycin, polychlorinated biphenils (PCBs) and aflotoxin B1, respectively. Applicability to river water samples was demonstrated. Coupling of Polymerase Chain Reaction (PCR) with a piezoelectric biosensor for hybridization detection, to detect a specific mutation in apolipoprotein E (apoE) gene has been realized. Biotinylated 23-mer probes were immobilized on the streptavidin coated gold surface of a quartz crystal; the protein was covalently bound to the thiol/dextran modified gold surface. The device was able to distinguish different synthetic oligonucleotides. The hybridization reaction was also performed using real samples of DNA extracted from human blood and amplified by PCR. The system was able to realize apoE typing distinguishing between different groups of genotypes.
DNA optical sensor: a rapid method for the detection of DNA hybridization
Biosensors & Bioelectronics, 1998
A DNA optical sensor system is proposed based on the combination of sandwich solution hybridization, magnetic bead capture, flow injection and chemiluminescence for rapid detection of DNA hybridization. Bacterial alkaline phosphatase (phoA) gene and Hepatitis B virus (HBV) DNA were used as target DNA. A biotinylated DNA probe was used to capture the target gene onto the streptavidin-coated magnetic beads and a calf intestine alkaline phosphatase (CAP)-labelled DNA probe was used for subsequent enzymatic chemiluminescence detection. The detection cycle was less than 30 min, excluding the DNA hybridization time, which was about 100 min. Both the phoA gene and HBV DNA could be detected at picogramme or femtomole level. No response signal was obtained when target DNA did not exist in the sample. Successive sample detection could be made by removing the magnetic field and a washing step.
A fast, sensitive and cost-effective method for nucleic acid detection using non-radioactive probes
Biology Methods and Protocols, 2018
Nucleic acid detection and quantification using a labeled DNA probe is a very common molecular biology procedure. Here, we describe a new method, based on commonly used laboratory solutions, for nucleic acid hybridization and detection with digoxigenin-labeled DNA probes. The protocol described is faster, more sensitive and much cheaper than a standard protocol using commercial solutions. Comparison with a classical radioactive detection method shows that the latter exhibits less background and shows a greater linear response. Hence, the proposed protocol may be routinely performed for qualitative detection of nucleic acid, but when precise signal quantitation needs to be obtained, radioactive probe hybridization associated to phosphorimaging technology is more reliable.
ACS Sensors, 2018
Currently, electrochemical nucleic acid-based biosensing methodologies involving hybridization assays, specific recognition of RNA/DNA and RNA/RNA duplexes, and amplification systems provide an attractive alternative to conventional quantification strategies for the routine determination of relevant nucleic acids at different settings. A particularly relevant objective in the development of such nucleic acid biosensors is the design of as much as possible affordable, quick and simple methods while keeping the required sensitivity. With this aim in mind, this work reports, for the first time, a thorough comparison between eleven methodologies that involve different assay formats and labeling strategies for targeting the same DNA. The assayed approaches use conventional sandwich and competitive hybridization assays, direct hybridization coupled to bioreceptors with affinity for RNA/DNA duplexes, multi-enzyme labeling bioreagents, and DNA concatamers. All of them have been implemented on the surface of magnetic beads (MBs) and involve amperometric transduction at screen-printed carbon electrodes (SPCEs). The influence of the formed duplex length and of the labeling strategy have also been evaluated. Results demonstrate that these strategies can provide very sensitive methods without the need for using nanomaterials or polymerase chain reaction (PCR). In addition, the sensitivity can be tailored within several orders of magnitude simply by varying the bioassay format, hybrid length or labeling strategy. This comparative study allowed us to conclude that the use of strategies involving longer hybrids, the use of antibodies with specificity for RNA/DNA heteroduplexes and labeling with bacterial antibody binding proteins conjugated with multiple enzyme molecules, provide the best sensitivity. ASSOCIATED CONTENT Supporting Information. A table containing the optimized experimental conditions and related references is supplied as Supporting Information (pdf). This material is available free of charge via the Internet at http://pubs.acs.org.