Automatic modulation classification of digital modulations in presence of HF noise (original) (raw)
Related papers
Study and Comparison of Various Modulation Classification Techniques under Noisy Channel Conditions
2012
Automatic Modulation Classification is a procedure performed at the receiver based on the received signal before demodulation when the modulation format is not known to the receiver. : Automatic Modulation Classification is also believed to play an important role in the implementation of Software Defined Radio (SDR) of the 4thGeneration (4G) communication system. The ability to automatically select the correct modulation scheme used in an unknown received signal is a major advantage in a wireless network. The automatic recognition of the modulation format of a detected signal, the intermediate step between signal detection and demodulation, is a major task of an intelligent receiver. The work aims in devising low complexity blind algorithm under noisy and frequency selective channel conditions Database has been generated for various modulated signals such as 2ASK, 4ASK, 2FSK,4FSK, BPSK and QPSK and QAM signals. Additive White Gaussian Noise (AWGN) noise is added and signals are anal...
Comparison of Automatic Modulation Classification Techniques
Journal of Communications
The advancement of digital communication and technology triggered new challenges related to the channel and radio spectrum utilization. From the other hand, real-time communications are keen of time where requests need to be processed in very short time. Automatic modulation is one of promising approaches that relies on pretrained classifiers in order to recognize the type of modulation techniques used by the transmitter. Considering that noise is dominating between the transmitter and receiver, the task of automatic modulation classification is become harder. Noise is destroying the obvious features of the signals and degrade the classification accuracy. The modulation identification technique is made to recognize the type of modulation using the deep learning technology. This paper is listing the common stat of the arts used in automatic modulation classification along with their performance measures. It was realized that deep learning classifier manifested in Conventional Neural ...
2014
Automatic Modulation Classification (AMC) is the process of deciding, based on observations of the received signal, what modulation is being used at the transmitter. It is also becoming increasingly important in cooperative communications, with the advent of the Software-Defined Radio (SDR). Classifying signal types is of high interest in various other application areas such as imaging, communication and control target recognition. Hence, the digital modulation recognizers have critical importance. Ten Digitally modulated signals are generated. Channel conditions have been modeled by simulating AWGN and multipath Rayleigh fading effect. Seven key features have been used to develop the classifier. Higher order QAM signals such as 16QAM, 64QAM and 256 QAM are classified using higher order statistical parameters such as moments and cumulants. Feature based ANN classifier has been developed. Overall classification result obtained for 3dB SNR is more than 97%. The success rate is 99 % (n...
Selection of optimal features for digital modulation recognition
The paper proposes a new method for the classification of commonly used digital modulations. The method uses previously reported features such as instantaneous amplitude, instantaneous phase and spectrum symmetry beside a set of new features from both spectral and time domain. A classifier based on Gaussian mixture models was used to analyze the features and classify the modulations. ASK, FSK, MSK, BPSK, QPSK, PSK, FSK4 and QAM-16 were chosen for the classification as the best-known digital modulations used in modern communication technologies.
Automatic Modulation Classification Using Statistical Features in Fading Environment
2013
Software radio technology is expected to play an important role in the development of Fourth Generation (4G) wireless communication systems. The signal identification process, an intermediate step between signal interception and demodulation, is a major task of an intelligent receiver. Automatic Modulation Classification (AMC) is the process of deciding, based on observations of the received signal, what modulation is being used at the transmitter. Ten Candidate signals 2ASK, 4ASK, 2PSK, 4PSK 2FSK, 4FSK and 16 QAM, GMSK, 64QAM and 256 QAM were generated. Channel conditions were modelled by simulating AWGN and multipath Rayleigh fading effect. Instantaneous features such as amplitude, phase and frequency were first derived. Stochastic features were derived from instantaneous features. Seven key features were used to develop the classifier. Higher order QAM signals such as 64QAM and 256 QAM were classified using higher order statistical parameters such as moments and cumulants. Decisi...