Poly(glycidyl methacrylate): a highly versatile polymeric building block for post-polymerization modifications (original) (raw)
Related papers
Polymer, 2004
N,N-dimethylacrylamide (DMA) and N-acryloxysuccinimide (NAS) were copolymerized by the reversible addition-fragmentation chain transfer (RAFT) polymerization technique, to obtain random and block copolymer precursors onto which different side-groups may be statistically grafted via the reactive NAS units. These reactive copolymers have interesting applications in various fields such as coatings and paints, water purification and biology. Random poly(DMA-co-NAS) copolymer chains were synthesized with a 75/25 molar ratio, high conversion, an excellent molecular weight (MW) control from 5000 to 130 000 g mol K1 , and low polydispersity index (M w /M n !1.1). Poly(DMA-b-NAS) block copolymers were synthesized by a two step method, in which a poly(DMA) homopolymer was prepared first and then used as macro-chain transfer agent to polymerize NAS. For example, a poly(DMA-b-NAS) sample was obtained with an average molecular weight of 44 300/7400 g mol K1 corresponding to 447 DMA and 44 NAS units. Such block copolymers had not yet been synthesized by any controlled polymerization technique. They can be used to prepare polymers with exactly the same backbone and an increasing number of different side groups (e.g. hydrophobic, ionic or fluorescent).
Reactive and Functional Polymers, 2008
The synthesis of amphiphilic and adaptative block copolymers has been envisioned following a commutative two-step strategy involving atom transfer radical polymerization (ATRP) and the Huisgen-1,3-dipolar cycloaddition techniques. The reliability of this strategy is based on the use of an azido-containing ATRP initiator, the 2-(2-azidoethoxy)ethylbromoisobutyrate (N 3 E i BBr), able to be ''clicked" to an alkyne-terminated derivative and to promote the ATRP polymerization from the active site. In the context of this work, an alkyne-terminated poly(e-caprolactone) produced by ring-opening polymerization (ROP) of CL was employed as hydrophobic ''clickable" segment. The N 3 E i BBr initiator was obtained by nucleophilic substitution of the chloride atom from 2-(2-chloroethoxy)ethanol by an azide function and followed by the esterification of the hydroxy function by bromoisobutyryl bromide. This initiator was employed in polymerization of N,N-dimethylamino-2-ethyl methacrylate (DMAEMA) monomer by ATRP in THF at 60°C using CuBr complexed by 1,1,4,7,10,10-hexamethyltriethylenetetramine (HMTETA) as catalytic complex. Low initiation efficiencies were obtained and they were ascribed to intramolecular cyclization during the polymerization as evidenced by ESI-MS and 2D NMR spectroscopy. The ''Click" coupling reaction was performed in THF at r.t. and was found to be efficient when using CuBr complexed by 2,2 0 -bipyridine ligand. To circumvent the low initiation efficiency, the N 3 E i BBr could be ''clicked" in a first step to PCL precursors before initiating the polymerization of DMAEMA monomer by ATRP. In this context, various catalytic complexes in different composition ratio were employed to optimize the ''click" coupling step. Moreover, this strategy was found to be suitable to produce well-defined PCL-b-PDMAEMA block copolymers, characterized by narrow polydispersity indices. Since ATRP and the Huisgen-1,3-dipolar cycloaddition both require the use of a copper(I)-based catalyst, the two first strategies were merged in a ''one-pot" process in order to obtain in one step a well-defined block copolymer characterized by a narrow polydispersity index and predictable composition and block lengths.
Journal of Macromolecular Science, Part A
A new methacrylate monomer 2-(4-nitrophenyl)-2-oxoethyl-2-methacrylate (NFM) was synthesized and its radical copolymerization with glycidyl methacrylate (GMA) was studied in 1,4-dioxane solution at 65 C using 2,2 0-azobisisobutyronitrile as an initiator. The synthesized monomer and copolymers were characterized by FTIR, 1 H and 13 C-NMR spectroscopy. The analysis of reactivity ratios revealed that NFM is less reactive than GMA, and copolymers formed are statistically in nature. Thermogravimetric analysis of the polymers reveals that the thermal stability of the copolymers increases with an increasing in the mole fraction of NFM in the copolymers. Glass transition temperatures of the copolymers decreased with an increasing of NFM molar fraction in copolymers. In addition, according to the results obtained from the contact angle and zeta potential measurements the hydrophobic character of the polymer decreases (it means surface free energy increases) and its zeta potential becomes more negative with increase of NFM ratio in the copolymer. Polymers with carbonyl functional groups have been particularly interesting because of their use as photoresists.
Biomacromolecules, 2006
Well-defined linear poly(acryloyl glucosamine) (PAGA) exhibiting molar masses ranging from 3 to 120 K and low polydispersities have been prepared via reversible addition-fragmentation chain transfer polymerization (RAFT) in aqueous solution without recourse to protecting group chemistry. The livingness of the process was further demonstrated by successfully chain-extending one of these polymers with N-isopropylacrylamide affording narrow dispersed thermosensitive diblocks. This strategy of polymerization was finally extended to the preparation of glycopolymer stars from Z designed non-water-soluble trifunctional RAFT agent. After the growth of very short blocks of poly(hydroxyethyl acrylate) (DP nbranch) 10), AGA was polymerized in aqueous solution in a controlled manner affording well-defined 3-arm glycopolymer stars.
Synthesis and Study of Thermoresponsive Amphiphilic Copolymers via RAFT Polymerization
Polymers, 2022
Synthesis and study of well-defined thermoresponsive amphiphilic copolymers with various compositions were reported. Kinetics of the reversible addition-fragmentation chain transfer (RAFT) (co)polymerization of styrene (St) and oligo(ethylene glycol) methyl ether methacrylate (PEO5MEMA) was studied by size exclusion chromatography (SEC) and 1H NMR spectroscopy, which allows calculating not only (co)polymerization parameters but also gives valuable information on RAFT (co)polymerization kinetics, process control, and chain propagation. Molecular weight Mn and dispersity Đ of the copolymers were determined by SEC with triple detection. The detailed investigation of styrene and PEO5MEMA (co)polymerization showed that both monomers prefer cross-polymerization due to their low reactivity ratios (r1 < 1, r2 < 1); therefore, the distribution of monomeric units across the copolymer chain of p(St-co-PEO5MEMA) with various compositions is almost ideally statistical or azeotropic. The th...
Materials Research, 2014
Poly(2-(dimethylamino)ethylmethacrylate-b-methymethacrylate) (PDMAEMA-b-PMMA) poly(2-(dimethylamino)ethylmethacrylate-b-vinylcaprolactam-b-(2-(dimethylamino)ethyl methacrylate) (PDMAEMA-b-PVCL-b-PDMAEMA) and poly(vinylcaprolactam-b-(2-(dimethylamino) ethylmethacrylate-b-vinylcaprolactam) (PVCL-b-PDMAEMA-b-PVCL) block copolymers were obtained by reversible addition-fragmentation chain transfer (RAFT) polymerization, and the effect of the solution pH on the particle size was investigated. In the case of PDMAEMA-b-PMMA, PDMAEMA was first synthesized using 2-cyanoprop-2-yl dithiobenzoate (CPDB) as a chain transfer agent (CTA), which was subsequently used for the RAFT polymerization of MMA. The triblock copolymers were obtained using PDMAEMA or PVCL as macro-CTAs prepared using dibenzyl trithiocarbonate (DBTTC) as a bifunctional RAFT agent. The structure and formation of the copolymers was confirmed through 1 H NMR and SEC analysis. The particle size varied considerably depending on the pH of the aqueous solutions of copolymers indicating that these materials could be potential candidates for biomedical applications.
Macromolecular Chemistry and Physics, 2006
RAFT polymerization was used to prepare PMMA-b-PNIPAM copolymers. Two different chain transfer agents, tBDB and MCPDB, were used to mediate the sequential polymerizations. Micellar solutions and gels were prepared from the resulting copolymers in aqueous solution. When heated above T c of PNIPAM (about 31 8C), DLS revealed that PNIPAM coronas collapsed, resulting in aggre-gation of the original micelles. The micellar gels underwent syneresis above T c as water was expelled from the ordered gel structure, the lattice periodicity of which was determined by SANS. A large decrease in lattice spacing was observed above T c. The gel became more viscoelastic at high temperature, as revealed by shear rheometry which showed a large increase in G 00 .