Synthesis and characterization of linseed oil‐based nanocomposites (original) (raw)
Related papers
Development and Thermo-Physical Properties of Bio-Based Polymer/Clay Nanocomposites
speautomotive.com
Bio-based resin systems obtained as blends of functionalized vegetable oils and petroleum based resins have been found to increase toughness of petroleum based resins and improve their environmental friendliness. Nevertheless, this improvement in toughness generally compromises the stiffness of the resin system. Nano-scale layered silicate (nano-clay) polymer nanocomposites exhibit enhanced mechanical and physical properties at relatively low weight fractions of inclusions. The reported study shows that proper stiffness-toughness balance along with enhancement in many other physical properties can be obtained by incorporating nano-scale layered silicates in bio-blended polymers. Polymer nanocomposites with varying clay contents and varying bio-blend (epoxidized soya bean oil) in unsaturated polyester resins were manufactured. Tensile properties and moisture absorption properties were studied. Fracture surface morphologies and characterization of nanocomposites were performed using electron microscopy. The resulting bio-blended polymer nanocomposites exhibit promising results for use in structural applications.
Polymeric nanocomposites were synthesized from functionalized soybean-oil-based polymer matrix and montmorillonite (MMT) clay using an in situ free radical polymerization reaction. Acrylated epoxidized soybean oil combined with styrene was used as the monomer. Organophilic MMT (OrgMMT) was obtained using a quaternized derivative of methyl oleate, which was synthesized from olive oil triglyceride, as a renewable intercalant. The resultant nanocomposites were characterized using X-ray diffraction and atomic force microscopy. The effect of increased nanofiller loading on the thermal and mechanical properties of the nanocomposites was investigated using thermogravimetric analysis and dynamic mechanical analysis. It was found that the desired exfoliated nanocomposite structure was achieved when the OrgMMT loading was 1 and 2 wt%, whereas a partially exfoliated or intercalated nanocomposite was obtained for 3 wt% loading. All the nanocomposites were found to have improved thermal and mechanical properties as compared with virgin acrylated epoxidized soybean-oil-based polymer matrix. The nanocomposite containing 2 wt% OrgMMT clay was found to have the highest thermal stability and best dynamic mechanical performance.
Polymer International, 2010
Polymeric nanocomposites were synthesized from functionalized soybean-oil-based polymer matrix and montmorillonite (MMT) clay using an in situ free radical polymerization reaction. Acrylated epoxidized soybean oil combined with styrene was used as the monomer. Organophilic MMT (OrgMMT) was obtained using a quaternized derivative of methyl oleate, which was synthesized from olive oil triglyceride, as a renewable intercalant. The resultant nanocomposites were characterized using X-ray diffraction and atomic force microscopy. The effect of increased nanofiller loading on the thermal and mechanical properties of the nanocomposites was investigated using thermogravimetric analysis and dynamic mechanical analysis. It was found that the desired exfoliated nanocomposite structure was achieved when the OrgMMT loading was 1 and 2 wt%, whereas a partially exfoliated or intercalated nanocomposite was obtained for 3 wt% loading. All the nanocomposites were found to have improved thermal and mechanical properties as compared with virgin acrylated epoxidized soybean-oil-based polymer matrix. The nanocomposite containing 2 wt% OrgMMT clay was found to have the highest thermal stability and best dynamic mechanical performance.
Swelling kinetics of linseed oil‐based nanocomposites
Journal of Applied Polymer …, 2009
Kinetics of swelling and sorption behavior of copolymers (based on linseed oil, styrene, divinylbenzene, and acrylic acid via cationic and thermal polymerization) is studied in tetrahydrofuran (THF) at different temperatures. The values of n in the transport equation are found to be below 0.4, showing non-Fickian or pseudo-Fickian transport in the polymers. The dependence of diffusion coefficient on the composition and temperature has also been studied for the linseed oilbased polymers. The diffusion coefficient in cationic samples decreases with an increase in the oil contents in the samples. In case of thermal samples, the diffusion coefficient first increases up to 30% oil contents and then decreases. The diffusion coefficient decreases with an increase in temperature for all of the linseed oil polymer samples. The sorption coefficient increases with an increase in the oil contents for all samples. The crosslink density (calculated from the THF swelling) ranges from 20.16 to 92.34 Â 10 6 mol/cm 3 for cationic samples and 20.62 to 86.01 Â 10 6 mol/cm 3 for thermal samples.
Polymer, 2005
The new biobased nanocomposites are processed from anhydride-cured epoxidized linseed oil (ELO)/ or octyl epoxide linseedate (OEL)/diglycidyl ether of bisphenol F (DGEBF) epoxy matrix and organomontmorillonite clay. The selection of anhydride curing agent and biobased epoxy resulted in an excellent combination to provide an epoxy matrix having high elastic modulus, high glass transition temperature, and high heat distortion temperature (HDT), with higher amounts of functionalized vegetable oil (FVO), compared with aminecured biobased epoxy. The sonication technique was utilized to process the organically-modified clay nanoplatelets in the glassy biobased epoxy network resulting in nanocomposites where the clay nanoplatelets are almost completely exfoliated and homogeneously dispersed in the epoxy network. The processed exfoliated clay nanocomposites showed higher storage modulus compared with the neat epoxy containing the same amount of FVO. Therefore, the lost storage modulus with larger amount of FVO can be regained with exfoliated clay nanoreinforcement. q
Industrial Crops and Products, 2011
Biodegradable polymers, such as poly(lactic acid) (PLA) have attracted a lot of attention in the scientific community recently due to a rapid growth of intensive interest in the global environment for alternatives to petroleum-based polymeric materials. Fatty nitrogen compounds (FNCs), fatty amides (FA), fatty hydroxamic acids (FHA), and carbonyl difatty amides (CDFA), which were synthesized from vegetable oils, were used as one of organic compounds to modify natural clay (sodium montmorillonite). The clay modification was carried out by stirring the clay particles in an aqueous solution of FA, FHA, and CDFA, by which the clay layer thickness increased from 1.23 to 2.61, 2.84 and 3.19 nm, respectively. The modified clay was then used in the preparation of the PLA/epoxidized soybean oil (ESO) blend nanocomposites. They were prepared by incorporating 2% of CDFA-MMT and 3% of both FA-MMT and FHA-MMT. The interaction of the modifier in the clay layer was characterized by X-ray diffraction (XRD), and Fourier transform infrared (FTIR). Elemental analysis was used to estimate the presence of FNCs in the clay. The nanocomposites were synthesized by solution casting of the modified clay and a PLA/ESO blend at the weight ratio of 80/20, which has the highest elongation at break. The XRD and transmission electron microscopy (TEM) results confirmed the production of nanocomposites. PLA/ESO modified clay nanocomposites show higher thermal stability and significant improvement of mechanical properties in comparison with those of the PLA/ESO blend. The novelty of this study is use of FNCs which reduces the dependence on petroleum-based surfactants.
Physical and mechanical properties of a vegetable oil based nanocomposite
European Polymer Journal, 2018
Nanocomposites films were prepared from a bio-based waterborne polyurethane and cellulose nanocrystals (CNCs) obtained from the sulfuric acid hydrolysis of cellulose nanofibers. The polyurethane used as matrix of the nanocomposite film was synthesized from a biobased macrodiol derived from castor oil, 2,2-bis(hydroxymethyl) propionic acid, 1,6-hexamethylene diisocyanate and triethylamine. The concentration of CNC in the films was varied from 0 to 10 wt.%, and the films obtained by casting were characterized by DSC, DMA, tensile tests and TGA. Due to the hydrophilic nature of the PU, the nanocrystals were well dispersed, obtaining homogenous and transparent films which displayed improved thermal and mechanical properties compared to the neat PU. The impact of the CNCs on the crystallization of the polymer was analyzed. Finally, the mechanical properties were fitted to well known theoretical models, allowing a better understanding of the interactions between polymer and filler in the composites.
Synthesis of Montmorillonite Clay/Poly(vinyl alcohol) Nanocomposites and Their Mechanical Properties
Journal of Nanoscience and Nanotechnology, 2019
The montmorillonite/poly(vinyl alcohol) (MMT/PVA) nanocomposites films were synthesized by aqueous dispersion of MMT clay to PVA solution at 70-75 C for 4 h. The average thicknesses of the MMT/PVA films were 85-120 m. The amount of clay was varied between 0-5 wt%. The X-ray diffraction (XRD) and scanning electron microscopy (SEM) analysis revealed the coexistence of exfoliated and intercalated structure of MMT clay in PVA. The Raman analysis of 1 wt% MMT/PVA showed, increased peak intensity at 1146.5 cm −1 , that is indicator of higher crystallinity compare to pure PVA. Dynamic mechanical analysis (DMA) of MMT/PVA nanocomposite films showed an increase in the storage modulus. The optimum value of storage modulus obtained was 8,752 MPa on dispersing 1.0 wt% MMT clay in the PVA yielding 20.0% increase in the storage modulus compare to the pure PVA films. Thermo-gravimetric, analysis (TGA) of the MMT/PVA nanocomposite films also showed the increase in the thermal stability with respect to pure PVA films. The 1.0 wt% MMT clay loading in PVA, improved the thermal stability of MMT/PVA to 325 C compared to 250 C for pure PVA.