In Situ Autonomous Biomechanical Characterization (original) (raw)
Related papers
Towards a non-destructive in vitro biomechanical characterization
2006 Bio Micro and Nanosystems Conference, 2006
This paper presents a fully automated microrobotic system based on force/vision referenced control designed for cell mechanical characterization. The design of the prototype combines Scanning Probe Microscopy (SPM) techniques with advanced robotics approaches. As a result, accurate and non-destructive mechanical characterization based on soft contact interactions mechanics are achieved. The in vitro working conditions are supported by the experimental setup so that mechanical characterizations can be performed in biological environmental requirements as well as in cyclical operating mode during several hours. The design and calibration of the different modules which compose the experimental setup are detailed. Experimentation on the mechanical cell haracterization under in vitro conditions on human adherent cervix Epithelial Hela cells are presented to demonstrate the viability and effectiveness of the proposed setup.
An Hybrid Micro-Force Sensing Device for Mechanical Cell Characterization
2006 IEEE Instrumentation and Measurement Technology Conference Proceedings, 2006
This paper presents a fully automated microrobotic system based on force/vision referenced control designed for cell mechanical characterization. The design of the prototype combines Scanning Probe Microscopy (SPM) techniques with advanced robotics approaches. As a result, accurate and non-destructive mechanical characterization based on soft contact interactions mechanics are achieved. The in vitro working conditions are supported by the experimental setup so that mechanical characterizations can be performed in biological environmental requirements as well as in cyclical operating mode during several hours. The design and calibration of the different modules which compose the experimental setup are detailed. Experimentation on the mechanical cell characterization under in vitro conditions on human adherent cervix Epithelial Hela cells are presented to demonstrate the viability and effectiveness of the proposed setup.
A robotic platform for targeted studies on biological cells
2008 2nd IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics, 2008
This paper deals with the development of an open design platform for explorative cell mechanotransduction investigation. The produced setup combines SPM (Scanning Probe Microscopy) techniques and advanced robotics approaches allowing both prolonged observations and spatial measurements on biological samples. As a result, an enhanced force probing method based on scanning microscopy techniques and advanced robotics and automation approaches are integrated in this device. Visual and force feedback control are used to achieve automatic data acquisition and monitoring process when high skills are required. Experimentation on the mechanical cell characterization under in vitro conditions on human adherent cervix Epithelial Hela cells are presented to demonstrate the viability and effectiveness of the proposed setup.
The force sensing bio-microscope: an efficient tool for cells mechanotransduction studies
Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Annual Conference, 2006
This paper deals with the development of an open design platform for explorative cells mechanotransduction investigation. The produced setup combines SPM techniques and advanced robotics approaches allowing to carry out both prolonged observations and spatial measurements on biological samples. As a result, enhanced force probing method based on scanning microscopy techniques and advanced robotics/automation approaches are integrated in this device. Visual and force feedback control are used to achieve automatic data acquisition and monitoring process when high skills are required. Preliminary in vitro experiments on human promyelocytic leukemia cells (NB4) are conducted in order to demonstrate the viability of the proposed design. Some relevant mechanical cell properties are extracted such as elasticity and viscosity parameters.
Journal of the Mechanical Behavior of Biomedical Materials, 2009
This paper deals with the development of an open design platform for characterization of mechanical cellular behavior. The resulting setup combines Scanning Probe Microscopy (SPM) techniques and advanced robotic approaches in order to carry out both prolonged observations and spatial measurements on biological samples. Visual and force feedback is controlled to achieve automatic data acquisition and to monitor process when high skills are required. The issue of the spring constant calibration is addressed using an accurate dynamic vibration approach. Experimentation on the mechanical cell characterization under in vitro conditions on human adherent Epithelial Hela cells demonstrates the viability and effectiveness of the proposed setup. Finally, the JKR (Johnson, Kendall and Roberts), the DMT (Derjaguin, Muller and Toporov) and Hertz contact theories are used to estimate the contact area between the cantilever and the biological sample. (S. Régnier).
A Microforce and Nanoforce Biomicroscope Device for In Vitro Mechanotransduction Investigation
IEEE Transactions on Instrumentation and Measurement, 2000
This paper deals with the development of an open design platform for explorative cell mechanotransduction investigation. The produced setup combines scanning probe microscopy (SPM) techniques and advanced robotics approaches, allowing both prolonged observations and spatial measurements on biological samples. As a result, an enhanced force probing method based on scanning microscopy techniques and advanced robotics and automation approaches is integrated in this device. Visual and force feedback control is used to achieve automatic data acquisition and monitoring processes when high skills are required. Experimentation on the mechanical cell characterization under in vitro conditions on human adherent cervix epithelial Hela cells are presented to demonstrate the viability and effectiveness of the proposed setup. Index Terms-Human adherent cervix epithelial Hela (EpH) cell mechanical characterization, in vitro mechanotransduction, scanning probe microscopy (SPM) techniques.
Modeling Soft Contact Mechanism of Biological Cells Using an Atomic Force Bio-Microscope
2006 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2006
The development of a mechanical force sensing device system based on force/vision feedback control for exploring in vitro the contact mechanics of human adherent cervix Epithelial Hela cells is presented in this paper. The design of the prototype combines Scanning Probe Microscopy (SPM) techniques with advanced robotics approaches. Some important issues in the design process, such as in vitro environment constraints and calibration of the force sensing probe are also addressed in this paper. The system is then used for accurate and non-destructive mechanical characterization based on soft contact interactions on biological samples. Finally, some mechanical properties of the studied biological samples are estimated using two appropriate models describing the contact mechanism taking into account adhesion forces.
Smart Microrobots for Mechanical Cell Characterization and Cell Convoying
IEEE Transactions on Biomedical Engineering, 2000
This paper deals with the effective design of smart microrobots for both mechanical cell characterization and cell convoying for in vitro fertilization. The first microrobotic device was developed to evaluate oocyte mechanical behavior in order to sort oocytes. A multi-axial micro-force sensor based on a frictionless magnetic bearing was developed. The second microrobotic device presented is a cell convoying device consisting of a wireless micropusher based on magnetic actuation. As wireless capabilities are supported by this microrobotic system, no power supply connections to the micropusher are needed.
Enhanced Near-Field Force Probing for In Vitro Biomechanical Characterization
The First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006. BioRob 2006., 2000
This paper presents a fully automated microrobotic system based on force/vision referenced control designed for mechanical cell characterization. The design of the prototype combines Scanning Probe Microscopy (SPM) techniques with advanced robotics approaches. As a result, accurate and non-destructive mechanical characterization based on soft contact mechanisms are achieved. The in vitro working conditions are supported by the experimental setup so that mechanical characterization can be performed in biological environmental requirements as well as in cyclical operating mode during several hours. The design of the different modules which compose the experimental setup is detailed. Mechanical cell characterization experiments under in vitro conditions on human cervix Epithelial Hela adherent cells are presented to demonstrate the viability and effectiveness of the proposed setup.
Elastic Properties Exploration of In Vitro Cultured Microscopic Cells based on Haptic Sensing
2006 IEEE Symposium on Virtual Environments, Human-Computer Interfaces and Measurement Systems, 2006
This paper deals with the design of a micro-force sensing device for biomechanical characterization of biological samples. This device combines (SPM) techniques and advanced robotics approaches and allows to carry out in vitro prolonged observations as well as biomechanical characterization experiments. Elastic properties of biological samples are reflected to the macroscale during the mechanical characterization process by means of a haptic sensing device. Non-linear elasticity theory formalism is used in order to achieve realistic elastic rendering. Mechanical characterization experiments are conducted on human tumoral Epithilial Hella cells in order to demonstrate the efficiency and viability of the proposed system.