Effect of Milling on the Mechanical Properties of Chopped SiC Fiber-Reinforced ZrB2 (original) (raw)

Combined effect of SiC chopped fibers and SiC whiskers on the toughening of ZrB2

L. Pienti, Laura Silvestroni

2014

Toughened ZrB2-based ceramics through SiC whisker or SiC chopped fiber additions

Diletta Sciti, Stefano Guicciardi, Laura Silvestroni

2010

DENSIFICATION, MICROSTRUCTURE EVOLUTION AND MECHANICAL PROPERTIES OF ULTRAFINE SIC PARTICLE-DISPERSED ZrB2 MATRIX COMPOSITES

C. Melandri

Boron Rich Solids: Sensors, Ultra High Temperature Ceramics, Thermoelectrics, Armor, 2010

Effect of different sintering aids on thermo–mechanical properties and oxidation of SiC fibers – Reinforced ZrB2 composites

Materials Chemistry and Physics, 2013

A Processing–Microstructure Correlation in ZrB2–SiC Composites Hot-pressed under a Load of 10 MPa

Universal Journal of Materials Science, 2015

Effect of a weak fiber interface coating in ZrB2 reinforced with long SiC fibers

Materials & Design, 2015

Hardness and toughness of hot pressed ZrB2–SiC composites consolidated under relatively low pressure

Journal of Alloys and Compounds, 2015

Effect of different additives and open porosity on fracture toughness of ZrB2–SiC-based composites prepared by SPS

Raziye Hayati

Ceramics International, 2017

Influence of milling time on the synthesis, microstructure and mechanical properties of ZrB2SiCZrO2f ceramic composites

Jan Suchanicz

Ceramics International, 2013

Synergistic influence of SiC and C3N4 reinforcements on the characteristics of ZrB2-based composites

Aziz Habibi-Yangjeh

Journal of Asian Ceramic Societies

Influence of SiAlON addition on the microstructure development of hot-pressed ZrB2–SiC composites

Zohre Ahmadi

Ceramics International, 2020

Beneficial effect of low BN additive on densification and mechanical properties of hot-pressed ZrB2–SiC composites

Shapour Jafargholinejad

Synthesis and Sintering

Microstructure and Toughening Mechanisms in Spark Plasma-Sintered ZrB2 Ceramics Reinforced by SiC Whiskers or SiC-Chopped Fibers

2010

Flexural strength and fracture behavior of ZrB2-HfB2-SiC-MoSi2 and ZrB2-HfB2-SiC-B4C composites produced by pressureless sintering method

mehri mashhadi

Role of h-BN content on microstructure and mechanical properties of hot-pressed ZrB2–SiC composites

Ceramics International, 2020

Temperature dependence of microstructure evolution during hot pressing of ZrB2-30 vol% SiC composites

Behzad Nayebi, Mehdi Shahedi Asl, Mahdi Ghassemi Kakroudi

Fractographical assessment of densification mechanisms in hot pressed ZrB2-SiC composites

Mehdi Shahedi Asl, Mahdi Ghassemi Kakroudi

Effect of open porosity on flexural strength and hardness of ZrB2-based composites

Esmail Salahi

Ceramics International, 2015

Synthesis and microstructural features of ZrB 2–SiC-based composites by reactive spark plasma sintering and reactive hot pressing

Jef Vleugels, Kim Vanmeensel

Scripta Materialia, 2007

A Taguchi approach to the influence of hot pressing parameters and SiC content on the sinterability of ZrB2-based composites

International Journal of Refractory Metals and Hard Materials, 2015

Microstructure and properties of ZrB2–SiC and HfB2–SiC composites fabricated by spark plasma sintering (SPS) using TaSi2 as sintering aid

Yoshio Sakka

Journal of the Ceramic Society of Japan, 2010

Comparative study on microstructure and oxidation behaviour of ZrB2-20 vol% SiC ceramics reinforced with Si3N4/Ta additives

Sravan Thimmappa

Journal of Alloys and Compounds, 2019

Effect of the Sintering Additive on Microstructure and Mechanical Properties of Hi-Nicalon TM SiC Fibers in a HfB 2 Matrix

Journal of the American Ceramic Society, 2012

A top-down approach to densify ZrB2–SiC–BN composites with deeper homogeneity and improved reliability

shuigen huang

Chemical Engineering Journal, 2014

Effect of Mechanical Milling and Sintering Parameters on the Mechanical Properties of SiC-ZrO2 Composite with a Network Microstructure

Lydia Anggraini

Lydia Anggraini, Ryohei Yamamoto, Hiroshi Fujiwara and Kei Ameyama, 2011

Fractographical characterization of hot pressed and pressureless sintered SiAlON-doped ZrB2–SiC composites

Behzad Nayebi, Mehdi Shahedi Asl, Mahdi Ghassemi Kakroudi

Influence of graphite nano-flakes on densification and mechanical properties of hot-pressed ZrB2–SiC composite

Ceramics International, 2015

In situ synthesis, microstructure, mechanical properties and thermal shock resistance of (ZrB2+SiC)/Zr2[Al(Si)]4C5 composites

Guo Dongdong

International Journal of Refractory Metals and Hard Materials, 2014

Mechanical properties of ZrB2-SiC (ZrSi2) ceramics

Oleg Grigoriev

Journal of the European …, 2010

Mechanical Properties of SiC Short-Fibre-Reinforced SiC Composites Fabricated by Tape Casting and Hot-Pressing

Toyohiko Yano

Advanced Composites Letters, 2005