A PWM Current Source Rectifier with Leading Power Factor (original) (raw)
Related papers
A New Hybrid High Power Factor Three-Phase Unidirectional Rectifier
2006 IEEE International Symposium on Industrial Electronics, 2006
This paper presents a new unidirectional hybrid three-phase rectifier composed by the parallel association of a single switch three-phase boost rectifier with a PWM three phase unidirectional rectifier. The objective to be reached is to reduce the harmonic content of input currents by processing a fraction of output active power with the PWM rectifier. The proposed structure allows to obtain a THD varying between O and 32%, just depending on the power processed by PWM three phase unidirectional rectifier. So, if the PWM rectifier is settled to process 45% of the total output power, the THD obtained is 0. Decreasing the PWM power to about 33% of the load power is possible to achieve the standards requirements. The rectifier topology conception, the principle of operation, control scheme and simulation results are also presented in this paper.
A three-phase three-switch two-level PWM rectifier
IEEE 34th Annual Conference on Power Electronics Specialist, 2003. PESC '03.
This paper presents a new topology for a high power factor three-phase P W M rectifier system, without a neutral wire, with output voltage control and high efliciency. The control is simple and was implemented using commercial single phase modulators with independent current loops and a voltage loop. The power circuit is also very simple, permitting the use of low cost power devices. A mathematical analysis for the converter will be presented, including the determination of all the power devices, the current and voltage transfer functions and a project procedure. Finally, results obtained through digital simulations and the experimental results obtained from a 6kW prototype will he presented.
PESC `92 Record. 23rd Annual IEEE Power Electronics Specialists Conference
The recently proposed circuit D-Q tramforniation is used to analyze a three phase current source PWM rectifier. DC operating point and AC transfer functions are conipletely determined. Most features of the converter are clearly interpreted. They are (1) the output voltage can be controlled from zero to nzmimum, (2) the system is equivaletitly an ideal current source in the steady state, (3) the system can be described as linear circuits and (4) the input power factor can be arbitrarily controlled within a certain control range.
A novel three-phase three-switch three-level high power factor SEPIC-type AC-to-DC converter
Proceedings of APEC 97 - Applied Power Electronics Conference, 1997
In the paper the topology of a new three-phase three-switch three-level PWM rectifier system is derived based on the basic structure of a DC-to-DC SEPIC converter. The system is characterized by full controllability of the power flow (independent of the level of the output voltage) and by a sinusoidal mains current shape in phase with the mains voltage. The operating principle of the converter is explained based on the conduction states of a bridge leg within a pulse period. The stationary operating behavior is analyzed by digital simulation based on the control of the mains phase currents by independent ramp-comparison controllers. Furthermore, a mathematical description of the operating behavior of the three-phase system including the coupling of the phase current controllers (given due to the floating mains star point) is discussed. Finally, results of an experimental investigation of a laboratory model of the converter are presented.
1999
The quality of A C power is affected by the large number of nonlinear loads, particularly power converter systems. One way of improving the power factor of A C D C converters in the 3-100 kW power range is by using Pulse Width Modulation rectifiers with low effects on the mains. The three-phase Power Factor Correction circuits process the whole amount of power transferred, using inductors whose current is controlled at switching frequencies above 20 kHz. Based on the inductor energy being fully or partially transferred to the output within a switching cycle, the operation is called Discontinuous or Continuous Conduction Mode. The definition comes from the shape of the inductor current, whether or not it reaches zero every switching cycle. The present work brings a contribution to the knowledge about three-phase Power Factor Correction in the Discontinuous Conduction Mode. These circuits are characterized by the small size of the inductors and simple voltage follower control with the...
Analysis and comparative evaluation of a three-phase three-level unity power factor y-rectifier
The 25th International Telecommunications Energy Conference, 2003. INTELEC '03., 2003
The basic principle of operation of a three-phase PWM rectifier system formed by star-connection of three single-phase three-level PWM rectifier modules (three-level y-rectifier) is discussed based on space vector calculus. The mains current ripple resulting for synchronized operation of the phase modules is calculated and comparatively evaluated against a direct three-phase PWM (Vienna) rectifier realization. The current stresses on the power semiconductors and on the passive power components are calculated analytically in order to provide a basis for the system dimensioning. A novel concept for controlling the y-rectifier is proposed which guarantees a symmetric loading of the phase modules and allows to continue the system operation also in case of heavily unbalanced mains voltage and/or for a failure of a mains phase. Finally, the advantages and drawbacks of the y-rectifier concept are summarized and topics of further research are identified.
Design and Implementation of PWM Rectifier with Power Factor Control
2019
1ME-Power Electronics and Drives, Department of Electrical and Electronics Engineering, Government College of Technology, Coimbatore, Tamil nadu, India 2Assistant Professor, Department of Electrical and Electronics Engineering, Government College of Technology, Coimbatore, Tamil nadu, India ---------------------------------------------------------------------***--------------------------------------------------------------------Abstract This paper analyzes the principle of the PWM rectifier, with a variable unity power factor control method of the PWM rectifier. Controller used closed-loop PI control, which inner uses single-phase input current control method controlled by power factor and controls the output DC voltage of rectifier. Voltage phase detection methods proposed could eliminate the affection of the voltage harmonics on phase detection accuracy. The results of the simulation and experiment verify the feasibleness and effectiveness of the tactic.
Review of three-phase PWM AC–AC converter topologies
2011
Abstract This paper presents first an overview of the well-known voltage and current dc-link converter topologies used to implement a three-phase PWM ac-ac converter system. Starting from the voltage source inverter and the current source rectifier, the basics of space vector modulation are summarized. Based on that, the topology of the indirect matrix converter (IMC) and its modulation are gradually developed from a voltage dc-link back-to-back converter by omitting the dc-link capacitor.
A literature survey on AC-DC Converter using three phase single stage PFC & PWM Technique
—Today to achieve ac-dc power conversions with high input power factor and low harmonic distortions, Power factor correction (PFC) converters are widely used. This paper lays out the research and development done in the field of PFC's. Converter topologies, control strategies, power quality etc has been discussed here. Higher power ratings, faster switching speed and lower cost are the areas of concern for digital controllers and converters and thus PFC has gained attention.
A three-phase unity power factor front-end rectifier for AC motor drive
IET Power Electronics, 2012
This study presents the bidirectional controlled switch-based high-frequency (HF) current injection circuit with simple gate control scheme. Improved power factor and total harmonic distortion (THD) of ac input line current of front-end rectifier for ac motor drive is achieved using this scheme. The gating pulses for feedback bidirectional controlled switches are generated at every zero-crossing instances of the respective phase voltages for the duration of p/6 rad. The analysis of the converter along with loss calculations is presented. In order to validate the concept, a prototype model of a converter for 5 kW power using voltage source converter feeding three-phase induction motor is designed in the laboratory. The sinusoidal pulse width modulation switching signals are generated by using DSP (TMS320F2812). The computer simulation results and experimental results are also presented. It is observed that HF current injection for the duration of one-third of phase voltage period results in a remarkable improvement in input current THD and power factor of the front-end rectifier.