The Use of Decision Tree Classifiers for the Detection of Sound Objects Using Microphone Array Filtered Data–Part II Applications (original) (raw)
Related papers
Sound source localization in a security system using a microphone array
A possible algorithm for sound source localization in a security system that is based on beamforming of a microphone array is described in this paper. It is shown that the adaptive beamforming algorithm, Minimum Variance Distortionless Response (MVDR), can be a part of the signal processing implemented in a security system. This signal processing includes the following stages: sound source localization, signal parameter estimation, signal priority analysis and, finally, control of protective and warning means (for example, video camera). The adaptive beamforming method MVDR is used for estimating the direction-of arrival (DOA) of signals generated by different sound sources, which arrive at the microphone array from different directions of the protected area. The scenario, in which four sound sources located at different points of the protected area generate different sound signals (warning, alarm, emergency and natural noise), is simulated in order to verify the algorithm for DOA estimation. The simulation results show that an adaptive microphone array can be successfully used for accurate localization of all sound sources in the observation area. The parallel version of the described algorithm is tested in Blue Gene environment using the interface MPI.
Detecting and segmenting sound sources by using microphone array
4th IEEE/RAS International Conference on Humanoid Robots, 2004., 2000
This paper describes microphone array that can be used for sound localization and sound capture. The system has omni-directional sensitivity, and can be as a tele-microphone for apropriate direction. Sound capture by microphone array is achieved by Sum and Delay Beam Former (SDBF). SimuIation of sound pressure distribution of 32 & 64ch circular microphone array are shown. According to simulation results, dedicated Firewire (IEEE1394) 32-channel board are developed with maximum sampling rate of llkHz sample. The 32ch circular microphone array system is evaluated by using frequency components of the sound.
System for an acoustic detection, localisation and classification
ACTA IMEKO, 2021
Currently, acoustic detection techniques of gunshots (gunshot detection and its classification) are increasingly being used not only for military applications but also for civilian purposes. Detection, localisation, and classification of a dangerous event such as gunshots employing acoustic detection is a perspective alternative to visual detection, which is commonly used. In some situations, to detect and localise the source of a gunshot, an automatic acoustic detection system, which can classify the caliber, may be preferable. This paper presents a system for acoustic detection, which can detect, localise and classify acoustic events such as gunshots. The system has been tested in open and closed shooting ranges and tested firearms are 9 mm short gun, 6.35 mm short gun, .22 short gun, and .22 rifle gun with various subsonic and supersonic ammunition. As ‘false alarms’, sets of different impulse acoustic events like door slams, breaking glass, etc. have been used. Localisation and ...
Comparison Between Different Sound Source Localization Techniques Based on a Real Data Collection
2008 Hands-Free Speech Communication and Microphone Arrays, 2008
Comparing the different sound source localization techniques, proposed in the literature during the last decade, represents a relevant topic in order to establish advantages and disadvantages of a given approach in a real-time implementation. Traditionally, algorithms for sound source localization rely on an estimation of Time Difference of Arrival (TDOA) at microphone pairs through GCC-PHAT. When several microphone pairs are available the source position can be estimated as the point in space that best fits the set of TDOA measurements by applying Global Coherence Field (GCF), also known as SRP-PHAT, or Oriented Global Coherence Field (OGCF). A first interesting analysis compares the performance of GCF and OGCF to a suboptimal LS search method. In a second step, Adaptive Eigenvalue Decomposition is implemented as an alternative to GCC-PHAT in TDOA estimation. Comparative experiments are conducted on signals acquired by a linear array during WOZ experiments in an interactive-TV scenario. Changes in performance according to different SNR levels are reported.
In recent years, there has been growing interest in the development of noise prediction and reduction techniques. The ability to localise problematic sound sources and determine their contribution to the overall perceived sound provides an excellent first step towards reducing noise. Several well-known methods can be applied in order to achieve a detailed acoustic assessment using microphone phased arrays. However, pressure-based solutions encounter difficulties assessing low frequency problems and their performance is often limited by spatial coherence losses. Alternatively, the use of acoustic vector sensor (AVS) offers several advantages in such conditions due to their vector nature. Each AVS is comprised of a pressure microphone and three orthogonal particle velocity sensors, allowing for the sound direction of arrival to be determined at any frequency within the audible frequency range. Sound localisation techniques using AVS are evaluated in this paper, comparing the character...
EURASIP Journal on Advances in Signal Processing, 2007
Speaker localization with microphone arrays has received significant attention in the past decade as a means for automated speaker tracking of individuals in a closed space for videoconferencing systems, directed speech capture systems, and surveillance systems. Traditional techniques are based on estimating the relative time difference of arrivals (TDOA) between different channels, by utilizing crosscorrelation function. As we show in the context of speaker localization, these estimates yield poor results, due to the joint effect of reverberation and the directivity of sound sources. In this paper, we present a novel method that utilizes a priori acoustic information of the monitored region, which makes it possible to localize directional sound sources by taking the effect of reverberation into account. The proposed method shows significant improvement of performance compared with traditional methods in "noise-free" condition. Further work is required to extend its capabilities to noisy environments.
Sound Source Localization with DAS Beamforming Method Using Small Number of Microphones
Localization of the sound source using microphone arrays is largely done by Acoustical Holography or Beamforming method. In this paper we present an implementation of Delay-And-Sum algorithm for beamforming computation using various microphone arrays. A MATLAB code was implemented for postprocessing of obtained acoustic signals. There is also included a description of the fractional delay filter implementation to delay the signal samples by racional values of sample period. The goal of this paper was comparing the accuracy of the source localization with the microphone arrays using small number of microphones. The results of the localization of several noise sources by the different types of arrays is presented.
Microphones' directivity for the localization of sound sources
2011
In a recent paper [P. Rizzo, G. Bordoni, A. Marzani, and J. Vipperman, "Localization of Sound Sources by Means of Unidirectional Microphones, Meas. Sci. Tech., 20, 055202 (12pp), 2009] the proof-of-concept of an approach for the localization of acoustic sources was presented. The method relies on the use of unidirectional microphones and amplitude-based signals' features to extract information about the direction of the incoming sound. By intersecting the directions identified by a pair of microphones, the position of the emitting source can be identified.
Fusion of multiple microphone array data for localizing sound sources in an industrial area
2016
Locating sound sources that contribute to noise annoyance near large industrial areas under different meteorological conditions is a hard problem. Permanently installed microphone arrays at the edges of an industrial area allow to determine the direction of arrival of the sound at their location. Several algorithms have been proposed for this purpose yet not all of them are robust against changes in effective sound speed and loss of coherence. Therefore algorithm parameters have to be chosen carefully. In addition, in this paper, a probabilistic approach is proposed to combine the information obtained from three or more arrays. The methodology accounts for the effect of wind and temperature on the direction of arrival. It also estimates uncertainty caused by uncertainty in the local meteorological situation, ground impedance, and presence of typical harbor objects such as stacked containers and piles of coal, etc. The proposed methodology is applied to an industrial area of over 10 ...
Frontiers in Engineering and Built Environment, 2021
PurposeThe purpose of this paper is to show a comparative study of different direction-of-arrival (DOA) estimation techniques, namely, multiple signal classification (MUSIC) algorithm, delay-and-sum (DAS) beamforming, support vector regression (SVR), multivariate linear regression (MLR) and multivariate curvilinear regression (MCR).Design/methodology/approachThe relative delay between the microphone signals is the key attribute for the implementation of any of these techniques. The machine-learning models SVR, MLR and MCR have been trained using correlation coefficient as the feature set. However, MUSIC uses noise subspace of the covariance-matrix of the signals recorded with the microphone, whereas DAS uses the constructive and destructive interference of the microphone signals.FindingsVariations in root mean square angular error (RMSAE) values are plotted using different DOA estimation techniques at different signal-to-noise-ratio (SNR) values as 10, 14, 18, 22 and 26dB. The RMSAE...