Micro Processing of Metals using a High Repetition Rate Femtosecond Laser: from Laser Process Parameter Study to Machining Examples (original) (raw)
Related papers
LASER MICRO PROCESSING USING A HIGH REPETITION RATE FEMTO SECOND LASER
The paper presents an overview about high repetition rate femto second laser machining and its applications. Novel phenomena in laser matter interaction with the repetition rate as one of the mainly influencing parameter are discussed. Depending on temporal distances between consecutive femto second laser pulses, either heat accumulation or particle shielding effects were detected. Heat accumulation enhanced the ablation behavior and higher ablation rates were found. On other hand energy losses due to particle shielding caused lowered ablation rates. Furthermore laser induced periodical surface structures, such as ripple formations and conical micro structures, were observed due to the high average laser energy input and accumulative effects. Formation and shape properties of these structures depend on laser processing parameter. Joining high repetition rate laser technology together with high speed beam deflection systems, significantly higher ablation rates and short processing ti...
Processing of metals and semiconductors by a femtosecond laser-based microfabrication system
Commercial and Biomedical Applications of Ultrafast Lasers III, 2003
A microfabrication system with the use of a femtosecond laser was designed for 3D processing of industrially important materials. The system includes a 120 fs, 1 kHz laser; beam delivery and focusing system, systems for automated 3D target motion and real-time imaging of the sample placed in a vacuum chamber. The first tests of the system on the processing of stainless steel and silicon are presented. We established thresholds and regimes of ablation for both materials. It was found that at relatively low laser fluences I < 3-5 J/cm 2 the regime of "gentle" ablation takes place, which is characterized by exceptional quality of the ablated surface, but slow ablation rate (< 25 nm/pulse). This regime is especially efficient for the patterning of markers on steel or silicon surfaces. The "fast" ablation regime at I > 10 J/cm 2 provides much higher ablation rate of 30-100 nm/pulse, giving an opportunity of fast high-quality processing of materials. This regime is well suited for drilling of through holes and fast cutting of materials. However, it was found that fast ablation regime imposes additional requirements on the quality of delivery and focusing of the laser beam because of the presence of parasitic ablation around the main spot on the tail of the radiation intensity distribution. As industrial machining examples, we demonstrate heat-affected-zone free drilling of through holes in a 50 µm thick stainless steel foil and and cutting of a 50 µm thick Si wafer with a net cutting speed of 8 µm/sec.
Micromachining of cold-worked tool steel by nanosecond laser
IOP Conference Series: Materials Science and Engineering
The paper brings the results of experimental study of the laser beam milling applying the industrial grade fiber nanosecond laser operating at wavelength of 1064 nm and 62SiMnCr4 cold-work tool steel as working material. The laser pulse intensity and both lateral and transverse pulse overlaps influence on the material removal rate (MRR) and surface roughness are analysed and discussed. The experimental results reveal that for high ablation efficiency in combination with good surface finish the higher values of laser pulse intensities and lower to moderate lateral pulse overlap distances should be applied.
This paper focuses on modelling and optimizing process parameters in pulsed laser micro-machining. Use of continuous wave or pulsed lasers to perform micro-machining of 3-D geometrical features on difficult-to-cut metals is a feasible option due the advantages offered such as tool-free and high precision material removal over conventional machining processes. Despite these advantages, pulsed laser micro-machining is complex, highly dependent upon material absorption reflectivity, and ablation characteristics. Selection of process operational parameters is highly critical for successful laser micro-machining. For this reason, it is necessary to clearly understand the process parameter influence on material removal in complex 3-D geometrical features. A set of designed experiments are carried in a pulsed Nd:YAG laser system using H13 hardened tool steel as work material. Several T-shaped deep features with straight and tapered walls have been machining as representative mold cavities ...
Femtosecond Laser Micro/nano Machining on Metallic and Semiconductor Materials
Formation of ripples or laser induced periodic surface structures (LIPSS) on semiconductor material like Silicon (Si) and on metals like Aluminum (Al) and Copper (Cu) and fabrication Silver (Ag) nanostructures in polymer matrix by femtosecond (fs) laser direct writing are reported in this paper. Laser irradiation was performed at normal incidence in air using linearly polarized Ti:Sapphire fs laser pulses of ~ 110 fs pulse duration and ~ 800 nm wavelength. Field emission scanning electron microscopy (FESEM) is utilized for imaging surface morphologies of laser written structures, revealing that surface morphology depends on various material processing parameters like laser fluence, polarization, material properties and number of applied pulses. Formation of polymer capped Ag nanoparticles inside the laser written microstructures is confirmed by the appearance of surface plasmon absorption band at 448 nm in the UV-Vis extinction spectrum. Nanoparticles formed were spherical in shape with an average particle size less than 20 nm. This technique is efficient, universal, cost-effective, and environmental friendly, which has potential applications in the fabrication of micro/nanostructures on variety of materials for microelectromechanical systems, nanoelectronics and nanophotonics.
Dynamic Process Behavior in Laser Chemical Micro Machining of Metals
Journal of Manufacturing and Materials Processing, 2018
Laser chemical machining (LCM) is a non-conventional processing method that enables a smooth and precise micro structuring of metallic surfaces. However, a high-quality removal is limited to a laser power window of some 100 mW. This is due to the high sensibility to removal disturbances, such as the deposition of metallic salts and oxides. In this work, the dynamic process behavior around the transition from a disturbance-free to a disturbed removal is investigated for the laser chemical machining of titanium (3.7024) and stainless steel (AISI 304) in different phosphoric acid solutions. Therefore, the removal cavities are recorded using confocal scanning microscopy and characterized regarding width, depth and quality in dependence of the laser power, feed velocity and electrolyte concentration. While the removal characteristics within the disturbance-free regime are found to be material-independent, the disturbed regime is strongly dependent on the tendency of the material to gas b...
Theoretical aspects of Laser micro machining and its role in new industrial revolution
CETMIE-2017, 2017
A laser micro machining is becoming popular in the industrial world due to its unique characteristics. Miniaturization has changed the path of machining of various materials. The various properties such as high peak intensity, precision, non-thermal interaction and flexibility make micro-laser machining a well accepted tool of machining. The major advantage of laser micro machining is lower aspect ratio, precise laser cutting zone, flexibility and fast processing. The objective of this review article is to analyze the various laser micromachining techniques, challenges in application, research carried out and their characteristics. This article also depicts the comparison between different laser micro-machining sources which have direct impact on the quality of machined surfaces. A comparison between pico-second, micro-second and nano-second laser has been explained with respect to fluence ablation in the machining zone.
Laser Beam Micromachining of Metals: A Review
Materials Today: Proceedings, 2019
Laser Beam Micromachining has revolutionized the industrial world by providing a better solution for machining the materials at micro level. LBMM has a wide application in these days because of its precise machining capability. In this paper, an overview of LBMM of metals is given so that an idea can be obtained about the process. The use of various type of laser and previous researches have been studied in this paper. The effect of various parameters like fluence energy, wavelength, pulse rate, threshold fluence and pulse frequency have been studied. In previous researches, it was observed that these parameters effect the geometries, morphology, machining speed, scanning speed and machining efficiency and many other characteristics of the material to a great extent which have been studied in this paper.
Fabrication of Micro/Nano Structures on Metals by Femtosecond Laser Micromachining
2014
Femtosecond laser micromachining has emerged in recent years as a new technique for micro/nano structure fabrication because of its applicability to virtually all kinds of materials in an easy one-step process that is scalable. In the past, much research on femtosecond laser micromachining was carried out to understand the complex ablation mechanism, whereas recent works are mostly concerned with the fabrication of surface structures because of their numerous possible applications. The state-of-the-art knowledge on the fabrication of these structures on metals with direct femtosecond laser micromachining is reviewed in this article. The effect of various parameters, such as fluence, number of pulses, laser beam polarization, wavelength, incident angle, scan velocity, number of scans, and environment, on the formation of different structures is discussed in detail wherever possible. Furthermore, a guideline for surface structures optimization is provided. The authors’ experimental work on laser-inscribed regular pattern fabrication is presented to give a complete picture of micromachining processes. Finally, possible applications of laser-machined surface structures in different fields are briefly reviewed.