Mesoporous Silica Nanoparticles Coated by Layer-by-Layer Self-assembly Using Cucurbit[7]uril for in Vitro and in Vivo Anticancer Drug Release (original) (raw)
Related papers
Korean Journal of Chemical Engineering, 2018
Mesoporous silica nanoparticles (MSNs) conjugating doxorubicin (DOX) via a pH-sensitive cleavable linkage, hydrazine (HYD) were synthesized. MSN-HYD-DOX were encapsulated with the polyaspartamide (PASPAM) grafted with the hydrophilic o-(2-aminoethyl)-o'-methylpoly(ethylene glycol) (PEG) and the cell permeating ligand, biotin (Biotin). The chemical structure of the synthesized MSN-HYD-DOX and PASPAM-g-PEG/Biotin was confirmed using FT-IR and 1 H-NMR spectroscopy. The mean diameter of the MSN-HYD-DOX@PASPAM-g-PEG/Biotin nanoparticle was 142 nm and 121 nm, respectively, examined by dynamic light scattering (DLS) and transmission electron microscope (TEM). The HYD bond was effectively cleaved in acidic condition, and thus DOX was released much faster at pH 5.0 than at pH 7.4. The cell viability in MSN-HYD-DOX@PASPAM-g-PEG/Biotin system was much lower than that of the free DOX drug because of efficient intracellular drug delivery associated with the biotin ligand.
Designed Monomers and Polymers, 2013
The aim of this study is the synthesis of pH-responsive cationic silica nanoparticles (NPs) by pyridinium-based ionic liquid for the improved sustained release formulations of methotrexate (MTX) as an anionic anticancer drug. Fanctionalized cationic silica NPs were successfully prepared via graft copolymerization of methacrylic acid (MAA) onto vinyl-bond-modified silica NPs. The prepared NPs were characterized using the scanning electron microscopy (SEM), the infrared spectroscopy (IR), and the thermogravimetric analysis. The resultant NPs were uniform spherical NPs with a mean diameter of approximately 160 ± 20 nm. We explored the ionic interaction of MTX NPs in order to generate pH-responsive controlled release system. The cumulative release of MTX-loaded composite microspheres shows a highly desirable precise pH-responsive drug release performance, i.e. loaded drug would not leak in physiological pH (7.4), but would release in a sustained way, where the pH value is lower (4). The protonation of carboxyl groups at mildly acidic condition resulted in a faster dissociation of copolymer/MTX complex, leading to an accelerated release of MTX at pH 4. Thus, complexation of MTX with NPs yielded a drug delivery system affording a pH-triggered release of MTX in an acidic environment. The in vitro cytotoxicity test by MTT assay against breast cancer cells, MCF7 indicates that NPs are nontoxic and suitable to use as drug carriers. Antitumor activity of the MTX-loaded nanocomposites against the cells was kept over the whole experiment process. The results showed that the MTX could be released from the nanocomposites without losing cytotoxicity.
Journal of pharmaceutical sciences, 2017
Drug targeting and stimuli-responsive drug release are two active areas of cancer research and hold tremendous potential in the management of cancer drug resistance. In this study, I addressed this issue and focused on the synthesis and characterization of pH-responsive Fe3O4@SiO2(FITC)-BTN/FA/DOX multifunctional nanoparticles aiming to increase drug accumulation in malignancies with both dual active targeting and endosomal drug release properties. Dye-doped silica magnetic-fluorescent composite was constructed by a simple co-precipitation of Fe(+2)/Fe(+3) salts followed by sol-gel formation and dual-targeting function was obtained by conjugating folate and biotin moieties on the silica surface of nanoparticles via an esterification reaction. Doxorubicin was then successfully attached on the amine-functionalized nanoparticles using a pH-sensitive Schiff-base formation. The physicochemical characterization of the structure was performed by dynamic light scattering, zeta-potential mea...
Colloids and surfaces. B, Biointerfaces, 2016
The hydrophilic drug Doxorubicin hydrochloride (DOX) paired with oleic acid (OA) was successfully incorporated into nanostructured lipid carriers (NLCs) by a high-pressure homogenization (HPH) method. Drug nanovehicles with proper physico-chemical characteristics (less than 200nm with narrow size distribution, spherical shape, layered internal organization, and negative electrical charge) were prepared and characterized by dynamic light scattering, zeta potential measurements, transmission electron microscopy, small-angle X-ray scattering and differential scanning calorimetry. The drug loading and entrapment efficiency of DOX-OA/NLCs were 4.09% and 97.80%, respectively. A pH-dependent DOX release from DOX-OA/NLCs, i.e., fast at pH 3.8 and 5.7 and sustained at pH 7.4, was obtained. A cytotoxicity assay showed that DOX-OA/NLCs had comparable cytotoxicity to pure DOX and were favorably taken up by HCT 116 cells. The intracellular distribution of DOX was also studied using a confocal la...
Dalton transactions (Cambridge, England : 2003), 2015
Mesoporous silica has emerged as one of the most promising carriers for drug delivery systems. However, the synthesis of ultra-small mesoporous silica nanoparticles (UMSNs) and their application in drug delivery remains a significant challenge. Here, spherical UMSNs (∼25 nm) have been synthesized and tested as drug carriers. Anti-cancer drugs mitoxantrone (MX), doxorubicin (DOX) and methotrexate (MTX) have been utilized as model drugs. The pH-responsive drug delivery system can be constructed based on electrostatic interactions between carriers and drug molecules. The UMSNs could store drugs under physiological conditions and release them under acidic conditions. Different pH-responsive release profiles were obtained in phosphate buffer solutions (PBSs) at the designed pH values (from 4.0 to 7.4). MX and DOX can be used in the pH-responsive delivery system, while MTX cannot be used. Furthermore, we found that the physiological stabilities of these drug molecules in UMSNs are in a de...
Applied Nanoscience, 2018
This report describes the synthesis of a controlled drug delivery system that was obtained by coating mesoporous silica nanoparticles (MSNs) with poly(β-amino ester) (PbAE), which is a solid and stable material at physiological pH, but is dissolved at acidic pH values, such as those in tumor tissues (from 5.0 to 6.5). To synthesize the system, PbAE chains were grafted onto amino-functionalized MSNs through a reaction between the surface amino groups of MSNs and the ends of acrylate chains of a PbAE. The system was physicochemically characterized by dynamic light scattering (DLS), Fourier transform infrared spectroscopy, transmission electron microscopy, thermogravimetric analysis, X-ray photoelectron spectrometry, and X-ray diffraction analyses. In addition, the in vitro release of doxorubicin (DOX) and doxycycline (DXY) in acidic and physiological media was evaluated. It was observed that the PbAE modification did not affect the mesoporous structure of MSNs. When the amount of 3-aminopropyltriethoxysilane was increased during functionalization, the amount of PbAE binding to MSNs increased as well. With respect to drug release, the sample with the highest amount of PbAE showed better control in the delivery of DXY and DOX in acidic media, because at pH 5.5, the release of both drugs was 40% higher than that at pH 7.4. These results reveal two aspects about the presence of PbAE in MSNs: PbAE does not affect the mesoporous structure of the nanoparticles, and PbAE is the main factor controlling the delivery of drugs in acidic media.
Molecules
The fruition, commercialisation and clinical application combining nano-engineering, nanomedicine and material science for utilisation in drug delivery is becoming a reality. The successful integration of nanomaterial in nanotherapeutics requires their critical development to ensure physiological and biological compatibility. Mesoporous silica nanoparticles (MSNs) are attractive nanocarriers due to their biodegradable, biocompatible, and relative malleable porous frameworks that can be functionalized for enhanced targeting and delivery in a variety of disease models. The optimal formulation of an MSN with polyethylene glycol (2% and 5%) and chitosan was undertaken, to produce sterically stabilized, hydrophilic MSNs, capable of efficient loading and delivery of the hydrophobic anti-neoplastic drug, doxorubicin (DOX). The pH-sensitive release kinetics of DOX, together with the anticancer, apoptosis and cell-cycle activities of DOX-loaded MSNs in selected cancer cell lines were evaluat...
Journal of Materials Chemistry, 2012
Two kinds of reduction and pH responsive disulfide-cross-linked poly(ethylene glycol)-polypeptide copolymers were prepared through one-step ring-opening polymerization of g-benzyl-L-glutamate N-carboxyanhydride (BLG NCA) or 3-benzyloxycarbonyl-L-lysine N-carboxyanhydride (ZLL NCA) and L-cystine N-carboxyanhydride (LC NCA) with amino group terminated monomethoxy poly(ethylene glycol) (mPEG-NH 2 ) as macroinitiator. Then, the copolymers were deprotected and dispersed in phosphate buffered saline, yielding PEG-polypeptide nanogels. Doxorubicin (DOX), a model anticancer drug, was effectively loaded into nanogels via electrostatic and hydrophobic interactions. The DOX release from all DOX-loaded nanogels was accelerated in intracellular reductive and acidic conditions, which controlled by Fickian diffusion and nanogels swelling. The enhanced intracellular DOX release was observed in glutathione monoester (GSH-OEt) pretreated HeLa cells. DOX-loaded nanogels showed higher cellular proliferation inhibition towards GSH-OEt pretreated HeLa and HepG2 cells than to unpretreated or buthionine sulfoximine (BSO) pretreated cells. Hemolysis tests indicated that nanogels were hemocompatible, and the presence of nanogels could reduce the hemolysis ratio (HR) of DOX significantly. These features suggest that the nanogels can efficiently load and deliver DOX into tumor cells and enhance the inhibition of cellular proliferation in vitro, providing a favorable platform to construct an efficient drug delivery system for cancer therapy.
Preparation of end-capped pH-sensitive mesoporous silica nanocarriers for on-demand drug delivery
European Journal of Pharmaceutics and Biopharmaceutics, 2014
Nanocarriers with a pH responsive behavior are receiving an ever growing attention due to their potential for promoting on-demand drug release and thus increase the therapeutic effectiveness of anti-tumoral pharmaceutics. However, the majority of these systems require costly, time-consuming and complex chemical modifications of materials or drugs to synthesize nanoparticles with pH triggered release. Herein, the development of dual drug loaded pH-responsive mesoporous silica nanoparticles (MSNs) with a calcium carbonate-based coating is presented as an effective alternative. This innovative approach allowed the loading of a non-steroidal anti-inflammatory drug (Ibuprofen) and Doxorubicin, with high efficiency. The resulting dual drug loaded MSNs have spherical morphology and a mean size of 167 nm. Our results indicate that under acidic conditions the coating disassembles and the drugs are rapidly released, whereas at physiologic pH the release is slower and gradually increases with time. Furthermore, an improved cytotoxic effect was obtained for Doxorubicin-Ibuprofen MSNs coated with CaCO 3 in comparison with non-coated particles. The cytotoxic effect of dual loaded carbonate coated particles, was similar to that of Doxorubicin + Ibuprofen free drug administration at 72 h, even with the delivery of a significantly lower amount of drug by MSNs-CaCO 3. These results suggest that the carbonate coating of MSNs is a promising approach to create a pH-sensitive template for a delivery system with application in cancer therapy.
Bio-Responsive Carriers for Controlled Delivery of Doxorubicin to Cancer Cells
Pharmaceutics
The cellular internalization of drug carriers occurs via different endocytic pathways that ultimately involve the endosomes and the lysosomes, organelles where the pH value drops to 6.0 and 5.0, respectively. We aimed to design and characterize pH/temperature-responsive carriers for the effective delivery of the anti-tumoral drug doxorubicin. To this purpose, poly(N-isopropylacrylamide-co-vinylimidazole) was synthesized as an attractive pH/temperature-sensitive copolymer. Microspheres made of this copolymer, loaded with doxorubicin (MS-DXR), disintegrate in monodisperse nanospheres (NS-DXR) under conditions similar to that found in the bloodstream (pH = 7.4, temperature of 36 °C) releasing a small amount of payload. However, in environments that simulate the endosomal and lysosomal conditions, nanospheres solubilize, releasing the entire amount of drug. We followed the NS-DXR internalization using two cancer cell lines, hepatic carcinoma HepG2 cells and lung adenocarcinoma A549 cell...