SNR scalable video coder using progressive transmission of DCT coefficients (original) (raw)
Related papers
An operational rate-distortion optimal single-pass SNR scalable video coder
2001
Abstract We introduce a new methodology for signal-to-noise ratio (SNR) video scalability based on the partitioning of the DCT coefficients. The DCT coefficients of the displaced frame difference (DFD) for inter-blocks or the intensity for intra-blocks are partitioned into a base layer and one or more enhancement layers, thus, producing an embedded bitstream. Subsets of this bitstream can be transmitted with increasing video quality as measured by the SNR.
Joint source-channel coding for motion-compensated DCT-based SNR scalable video
2002
Abstract In this paper, we develop an approach toward joint source-channel coding for motion-compensated DCT-based scalable video coding and transmission. A framework for the optimal selection of the source and channel coding rates over all scalable layers is presented such that the overall distortion is minimized. The algorithm utilizes universal rate distortion characteristics which are obtained experimentally and show the sensitivity of the source encoder and decoder to channel errors.
SNR-scalable extension of H.264/AVC
2004 International Conference on Image Processing, 2004. ICIP '04., 2004
Abstract We present an SNR-scalable extension of the H. 264/AVC video coding standard. To achieve an efficient SNR-scalable bit-stream representation of a video sequence, the temporal dependencies between pictures are exploited by using an open-loop subband ...
Analysis of the efficiency of snr-scalable strategies for motion compensated video coders
2004 International Conference on Image Processing, 2004. ICIP '04.
In this paper. an analysis of the efficiency o f three signal-to-noise ratio (SNR) scalablc strategies for motion compensated video coders and their non-scalable counterpan is presented. After assuming some models and hypotheses with respect to the signals and systems involved, we have obtained the SNR of each coding strategy as a function of the decoding rate. To validate our analysis, we have compared our theoretical results with data from encodings of real video sequences. Results show that our analysis describes qualitatively the pcrformance o f each scalable stratcgy. and therefore. i t can be useful to understand main fratures of each scalable technique and what factors inHucnce their cfficiency.
1998
Abstract We compare two SNR scalable video codecs. The first codec (CODEC1) is a three-layer single-pass quantization algorithm based on H. 263 and extends the work presented by Robers (see Master's Thesis Northwestern University, 1997) and Robers, Kondi and Katsaggelos (see Proc. SPIE Conf. on Visual Comm. and Image Proc., p. 201-12, 1998). The second codec (CODEC2) implements three layer SNR scalability as described in Annex O of the H.
A real-time SNR scalable transcoder for MPEG-2 video streams
2009
Disclaimer This document contains a student thesis (bachelor's or master's), as authored by a student at Eindhoven University of Technology. Student theses are made available in the TU/e repository upon obtaining the required degree. The grade received is not published on the document as presented in the repository. The required complexity or quality of research of student theses may vary by program, and the required minimum study period may vary in duration.
Video Compressionebu Technical Review – 2008 Q2 1 / 22
2015
Scalable Video Coding (SVC) is a recent amendment to the ISO/ITU Advanced Video Coding (H.264/AVC) standard, which provides optional but efficient scalability functionalities on top of the high coding efficiency of H.264/AVC. In addition to bringing a cost-efficient solution to the delivery of different formats of the same content to multiple users, it can be used to provide a better viewing experience (enhanced content portability, device power / content-quality adaptation, fast zapping times and fluid forward / rewind functions, efficient error retransmission, etc.). This article describes the potential of SVC, in terms of applications and performance. A brief overview of SVC functionalities, as well as practical use cases, are given in the following sections. Different performance evaluations, based on test results, are also described. 1.
Scalable Approximate DCT Architectures for Efficient HEVC-Compliant Video Coding
IEEE Transactions on Circuits and Systems for Video Technology, 2017
An approximate kernel for the discrete cosine transform (DCT) of length 4 is derived from the 4−point DCT defined by the High Efficiency Video Coding (HEVC) standard, and used that for the computation of DCT and inverse DCT (IDCT) of power−of−2 lengths. There are two reasons to consider the DCT of length 4 as the basic module. Firstly, it allows to compute DCTs of length 4, 8, 16, and 32 prescribed by HEVC. Moreover, the DCTs generated by 4−point DCT not only involve lower complexity but also offer better compression performance. Full-parallel and area-constrained architectures for the proposed approximate DCT are proposed to have flexible trade-off between area and time complexities. Also, a reconfigurable architecture is proposed where 8−point DCT can be used for a pair of 4−point DCTs. Using the same reconfiguration scheme 32−point DCT could be configured for parallel computation of two 16−point DCTs or four 8−point DCTs or eight 4−point DCTs. The proposed reconfigurable design can support real-time coding for high-definition video sequences in the 8K UHDTV format (7680 × 4320 @ 30 fps). A unified forward and inverse transform architecture is also proposed where the hardware complexity is reduced by sharing of hardware between DCT and IDCT computation. The proposed approximation has nearly the same arithmetic complexity and hardware requirement as those of recently proposed related methods, but involves significantly less error energy, and offers better PSNR than the others when the DCTs of length more than are used. A detail comparisons of complexity, energy efficiency, and compression performance of different DCT approximation schemes for video coding are also presented. It is shown that the proposed approximation provides better compressed image quality than the other approximate DCT. The proposed method can perform HEVC-compliant video coding with marginal degradation of video quality and slight increase in bit-rate with a fraction of computational complexity of the latter.
A noise resistant HDTV compression scheme
A fixed-length coding method for image compression is presented. This method compresses the Discrete Cosine Transform (DCT) coefficients of 8x8 pixel blocks of the picture and attains a compression ratio of 11.11 : 1. We then develop a compression scheme which combines variable-length coding with our fixedlength coding method. This is shown to improve the compression rate as well as the quality of HDTV pictures when undetected bit errors occur.
Efficient drift-free signal-to-noise ratio scalability
IEEE Transactions on Circuits and Systems for Video Technology, 2000
Signal-to-noise ratio (SNR) scalability has been incorporated into the MPEG-2 video-coding standard to allow for the delivery of two services with the same spatial and temporal resolution but different levels of quality. In this paper, we begin by reviewing the performance of a single-loop SNR scalable encoder that is compliant with the MPEG-2 standard and demonstrate that its performance is limited by drift in the base layer. We also look at an alternative single-loop drift-free noncompliant SNR scalable encoder, but discover that its coding efficiency is poor. We then review the performance of an MPEG-compliant two-loop SNR scalable encoder. Finally, we propose a new two-loop noncompliant encoder which achieves improved coding performance at the expense of some increase in encoder and decoder complexity.