Efficient Energy Management System (original) (raw)
Related papers
Design And Implementation Of Prepaid Energy Meter
2020
A theme of Electricity asking system known as sensible postpaid meter will help to improve income management system for utilization of energy and it reduces the exploitation of man power for taking meter readings and asking for shopper living in isolated areas. Problem of payment collection by each individual can be solved. It reduces the problem related to billing, consumer living in all over India specially for isolated area. Tampering in energy meter & theft of electricity will be avoided by using sensors, saving papers by using GSM technology & prepaid IOT technology tags. when the customer insert a wise card into the cardboard reader that’s connected in postpaid energy meter with tariff indicator kit. The card reader will read the stored information and delete the knowledge from the EEPROM IC(smart card) using the MC program in order that the open-end credit can’t be reused by others. When the amount is over, the relays can mechanically closedown the complete system. In this pa...
Smart Approach To Electricity Billing System
2017
Electricity is one of the basic requirements of human beings, which is widely used for domestic, industrial, commercial and agricultural purposes. There is great demand for electricity and it is increasing day by day, but now a day what happened actually the method for accessing the data from the energy meter and billing is not up to the mark as well as it is time consuming. It is also required a huge manpower to complete this process. Because of that to reduce this huge manpower as well as complications, we exists this system. Our system provides the electricity readings on an LCD screen as well as can SMS this reading and cost in rupees to the user. A GSM modem is also integrated along with the meter to send alerts to the particular consumer regarding their energy consumption. In case of failure of payment by a consumer the controller can disconnect the power supply of the consumer. A PC with a GSM receiver at the other end, which contains the database acts as the billing point. h...
Design and implementation of prepaid power billing system in smart grid environment
International Journal of Electrical and Computer Engineering (IJECE), 2022
This paper presents the real-time monitoring of energy consumption utilizing the global system for mobile communication (GSM) via wireless protocols. The power supply company has the authority to change or alter the tariff rates. The method of payment is prepaid, so there will be options for the customer to request the number of units assigned to the particular meter against the money. The customer can monitor the number of units consumed with the help of GSM. If the units are ten percent of the total units, then the system will give a warning message so that the customer can recharge it before cutting off the supply. A GSM-based wireless module has remote access to the usage of electricity. Simulation is done on Proteus while the hardware is implemented using the microcontroller Arduino Uno.
Automatic cut out two- -way energy billing system using power line communication
*Corresponding-There are many problems in distribution, metering and billing processes facing the power distribution utilities and the metering billing processes which are considered complex problems. In Nige types of meter in use. The system Automatic communications used for the transfer of data between consumer and utility. The aim of this project is to measure and monitor the electricity consumed by consumers in a locality and transmitting the measured reading between the consumer and electricity provider. The auth matter the advantages and disadvantages. The design carefully used two units which are linked together using PLC method, one is installed at the provider premises and the other at the of the two units are shown, the software design on how the system works is illustrated by the flow chart for the provider unit and the user unit. The construction of the hardware and the results of the testing are shown in the pictures 1, 2, 3, 4 and 5. The results shows that the system worked perfectly displaying the reading of the energy parameters and once any attempt to temper, the system automatically cut out the supply to the userThere are many problems in distribution, metering and billing processes facing the power distribution utilities and the metering and billing processes are considered complex problems. The existent classical method to retrieve energy meter data and billing each consumer and manually take the reading of that meter then return to the electricity distribution office to issue the bill for each customer. In addition, these collected data from software billing system for issuing bills. These classical method are suffering many problems. The main problems are the non sometimes at their houses which leading the meter reader to retry the process of meter reading and sometimes because of the lack of integrity and credibility of some of the meter readers, they do not retry meter reading they estimate the meter reading [1]. There are type Energy meter, Electronic Energy meters and in use are the kilowatt-hour meters (kWA)and the pre houses, offices, and factories, etc. Meter readers go to the place which is generally situated inside the house and take the meter reading. Most of the time the owner gives some extra money to the meter reader person t less meter reading. As a result, corruptions occur and actual payment is not received by the service provider. So, the provider faces a huge amount of loss in every Increasingly residents are getting tired of paying excess electricity bills. for their electricity upfront, before they use it. The benefit of this is that you don't have any surprise bills at the end of the month and can budget for your is the remote collection of consumption data from customers' utility like Electric meters using radio frequency, telephony, power-line or satellite communications technologies and process th concept of Power Line Communication is used for the transfer of data between consumer and utility. Power Line Communication uses a high-power line for communication. The data is transmitted at a higher frequency than that of the transmission frequency. The main advantage of this method is that no additional transmission line is required for the transmission of data. This project is mainly implemented for the purpose of getting a fully automatic electricity billing system. The aim of this project is to measure and monitor the electricity consumed by consumers in a locality The *Corresponding author: Tyowuah, Michael ngumom-ABSTRACT-There are many problems in distribution, metering and billing processes facing the power distribution utilities and the metering billing processes which are considered complex problems. In Nigeria there are two common system Automatic cut out two-way energy billing system using power line used for the transfer of data between consumer and utility. The aim of this project is to measure and monitor the electricity consumed by consumers in a locality and transmitting the measured reading between the consumer and electricity provider. The author reviewed other related works on the subject matter the advantages and disadvantages. The design carefully used two units which are linked together using at the provider premises and the other at the user's premises. The bloc of the two units are shown, the software design on how the system works is illustrated by the flow chart for the provider unit and the user unit. The construction of the hardware and the results of the testing are shown in the and 5. The results shows that the system worked perfectly displaying the reading of the energy parameters and once any attempt to temper, the system automatically cut out the supply to the user Automatic Meter Reading, Power Line communication, Arduino microcontroller, Electricity
2017
Today the metering instrument technology grown up significantly, such that the Consumed energy can be calculated mathematically displayed, data can be stored, data can be transmitted etc. Presently the micro-controllers are playing major role in metering instrument technology. The present project work is designed to collect the consumed energy data of a particular energy consumer through wireless communication system (without going to consumer house); the system can be called as Automatic Meter Reading (AMR) system. The automatic meter reading system is intended to remotely collect the meter readings of a locality using a communication system, without persons physically going and reading the meters visually. The application of the e-metering system is extended to streamline power distribution with online monitoring of power quality, real time theft detection and automatic billing. The power utility can recharge the prepaid card remotely through mobile communication based on customer...
Prepaid and Postpaid Energy Meter for Billing System Using Microcontroller and GSM
2016
In this paper smart energy meter with GSM model for prepaid and postpaid system is proposed. Due to this system the user has ability to select prepaid or postpaid mode as per his/her requirement. In prepaid mode balance is reduced as per energy is consumed. When the balance is low user gets a "Balance is low" message. If balance reaches to zero then with the help of relay power automatically gets cut off. If the account is recharged then the user gets uninterrupted power supply. In postpaid system with the help of GSM module MSEB gets the message of how much units a particular user is used and according to that data MSEB sends bill by post.