An `extended' anisotropic damage model based on Young/Poisson decomposition (original) (raw)
Related papers
A localized mapped damage model for orthotropic materials
This paper presents an implicit orthotropic model based on the Continuum Damage Mechanics isotropic models. A mapping relationship is established between the behaviour of the anisotropic material and that of an isotropic one. The proposed model is used to simulate the failure loci of common orthotropic materials, such as masonry, fibre-reinforced composites and wood. The damage model is combined with a crack-tracking technique to reproduce the propagation of localized cracks in the discrete FE problem. The proposed numerical model is used to simulate the mixed mode fracture in masonry members with different orientations of the brick layers.
New Tensors for Anisotropic Damage in Continuum Damage Mechanics
Journal of Engineering Materials and …, 2012
In this work, new proposed damage tensors are studied in order to investigate the damage effect variables in the mechanical behavior of materials. All cases studied in this work are defined in terms of the elasticity of the material and based on the hypotheses of both elastic strain equivalence and elastic energy equivalence. Moreover, the new proposed damage tensors are anisotropically expressed in terms of the well-known damage effect tensor M. The principal-valued damage effect tensor is used to obtain the first scalar invariant of that tensor and its inverse, which are employed in expressing and verifying the new proposed damage tensors. The study demonstrates that most of the new proposed damage tensors are verified within the framework of continuum damage mechanics. In addition, new hybrid damage tensors are proposed which are defined in terms of the damage effect tensor and the new proposed damage tensors. The new hybrid damage tensors are eventually expressed in terms of the damage effect tensor.
A comparative study of damage variables in continuum damage mechanics
International Journal of Damage …, 2009
In this work, various definitions of the damage variables are examined and compared. In particular, special emphasis is given to a new damage variable that is defined in terms of the elastic stiffness of the material. Both the scalar and tensorial cases are investigated. The scalar definition of the new damage variable was used recently by many researchers. However, the generalization to tensors and general states of deformation and damage is new and appears here for the first time. In addition, transformation laws for various elastic constants are derived. Finally, the cases of plane stress, plane strain, and isotropic elasticity are examined in detail. In these cases it is shown that only two independent damage parameters are needed to describe the complete state of damage in the material. In this work, a physical basis is sought for the damage tensor [M ] that is used to link the damage state of the material with effective undamaged configuration. The authors and numerous other researchers have used different paths including fabric tensors to connect the two configurations. However, the approach presented here provides for a strong physical basis for this missing link.
Implementation of an Anisotropic Damage Material Model using General Second Order Damage Tensor
2010
Damage in metals is mainly the process of the initiation and growth of voids. With the growing complexity in materials and forming processes, it becomes inevitable to include anisotropy in damage (tensorial damage variable). Most of the anisotropic damage models define the damage tensor in the principal damage direction, with the assumption that the principal damage direction coincides with that of principal plastic strain direction. This assumption limits the applicability of the model to proportional loads. This research is an effort towards implementing an anisotropic damage model for non-proportional loads. The implementation of an anisotropic damage model in an implicit FEA code is presented. The model is based on the hypothesis of strain equivalence. A second order general damage tensor is used as an internal variable to represent the damage at macro scale. Two simulations were carried out to check the implementation of the model; a single element orthogonal load change simulation and a rectangular cup deep drawing simulation. Promising simulation results are obtained at acceptable CPU costs.
On damage tensor in linear anisotropic elasticity
Theoretical and Applied Mechanics
In this paper, the anisotropic linear damage mechanics is presented starting from the principle of strain equivalence. The authors have previously derived damage tensor components in terms of elastic parameters of undamaged (virgin) material in closed form solution. Here, making use of this paper, we derived elasticity tensor as a function of damage tensor also in closed form. The procedure we present here was applied for several crystal classes which are subjected to hexagonal, orthotropic, tetragonal, cubic and isotropic damage. As an example isotropic system is considered in order to present some possibility to evaluate its damage parameters.
Tsai–Wu based orthotropic damage model
Composites Part C: Open Access, 2021
This paper presents a novel approach concerning the development of an orthotropic damage model for composite materials, based on the original plane stress Tsai-Wu failure criterion. In its original formulation, the Tsai-Wu is a mode-independent criterion only capable of acknowledging the existence of damage in a certain point of a composite material. It is not capable of identifying if the damage is located in the fibre, matrix or interlaminar zone. This study aims at filling this gap in knowledge by providing a simple method, based on equivalent stresses and strains, that identifies the relevant failure modes when the Tsai-Wu failure criterion is at the onset of damage. Using this novel methodology, it is possible to implement classical damage evolution constitutive laws based on the fracture energy regularization. At present, the proposed damage formulation is based on the consideration of a plane stress space and Mode I fracture, but its generalization to a full 3D damage model is expected to be defined in the near future. The damage model is implemented in the commercial finite element software ABAQUS through a user-defined material (UMAT) subroutine, and all numerical models are compared with experimental results available in the literature.
Continuum damage modelling and some computational issues
Revue Française de Génie Civil, 2002
Continuum damage mechanics is a framework for describing the variations of the elastic properties of a material due to microstructural degradations. This paper presents the application of this theory to the modelling of concrete. Several constitutive relations are devised, including incremental, explicit, and non local damage models. A general framework for damage induced anisotropy is also presented. In the second part of this contribution, computational issues in damage mechanics related to iterative schemes and solution control in non linear computations are considered. The paper concludes with an example of 3D finite element computation of a reinforced concrete beam, as part of a benchmark initiated by Electricite de France.
Isotropic damage model with different tensile–compressive response for brittle materials
International Journal of Solids and Structures, 2001
Incremental constitutive equations for brittle materials are formulated on the grounds of a frictional microcracked elastic model. The hypothesis of isotropic damage and the description of normal and tangential contact tractions on the crack faces by means of two second-order tensors provide a constitutive model with a reduced number of internal variables. The evolution equations of the latter ones are deduced from frictional and damage limit states and corresponding flow rules, from which the different behaviour to tensile and compressive stress states and dissipation at constant damage are represented. The model response is analysed for different stress states and limit strength domains are derived for monotonically increasing biaxial and triaxial stress states. Comparisons of the theoretical results with experimental data from literature related to concrete and cast-iron corroborate the proposed approach.
Decomposition of damage tensor in continuum damage mechanics
Journal of engineering mechanics, 2001
The principles of continuum damage mechanics are reviewed first for the case of uniaxial tension. The damage variable is then decomposed into two variables called crack damage variables and void damage variables. A consistent mathematical formulation is presented to decompose the damage tensor into two parts: one caused by voids and the other caused by cracks. In the first part of this work, isotropic damage in the uniaxial tension case is assumed. However, the generalization to three-dimensional states of damage is presented in the second part of this work, using tensorial damage variables. It is shown that the components of tensorial crack damage variables and void damage variables are not independent of each other, implying a coupling between the two damage mechanisms. This coupling may be obvious based on the physics of the problem, but a rigorous mathematical proof is given for it. Also, explicit relations governing the components of the crack and void damage variables are derived.