Magnetic Hydroxyapatite Bone Substitutes to Enhance Tissue Regeneration: Evaluation In Vitro Using Osteoblast-Like Cells and In Vivo in a Bone Defect (original) (raw)
Related papers
Journal of Materials Science: Materials in Medicine, 2010
Our purpose was obtaining and characterizing a complex composite system with multifunctional role: bone graft material and hyperthermia generator necessary for bone cancer therapy. The designed system was a magnetite enriched collagen/hydroxyapatite composite material, obtained by a co-precipitation method. Due to the applied electromagnetic field the magnetite will induce hyperthermia and cause tumoral cell apoptosis. The complex bone graft system was characterised by XRD, FTIR and SEM, while the hyperthermia was quantify by measuring the temperature increase due to the applied alternative electromagnetical field.
Hydroxyapatite Based Composites for Bone Regeneration
Aim of study: Preparation and characterization of the new nanocomposite, magneto-hydroxyapatite-alendronate (mag-HA-Ald np), for bone tissue scaffolds formation. Material and methods Iron oxide nanoparticles (Fe3O4 np) were added to aqueous solutions of Ca(NO3)2.4H2O and (NH4)2HPO4 for obtaining mag-HA np. The target nanocomposites, mag-HA-Ald np, were synthesized by using aqueous solution of alendronate (Ald), with different ratios. The structure of the prepared nanocomposites were investigated based on spectral (FTIR, XRD, SEM) and EDX analysis. The cytotoxicity of the nanocomposites were performed using MTT assay, to detect the effect of magnetic field application on the cell viability; two culture methods were applied (with and without magnetic field exposure). Results The spectral, FTIR, XRD, SEM as well as EDX measurements confirmed the synthesis of nanocomposite, magneto-hydroxyapatite-alendronate (mag-HA-Ald np) with different ratios. MTT assay results suggested the positive...
Development of Magnetically Active Scaffolds for Bone Regeneration
Nanomaterials (Basel, Switzerland), 2018
This work reports on the synthesis, with the thermally induced phase separation (TIPS) technique, of poly (l-lactide) (PLLA) scaffolds containing Fe-doped hydroxyapatite (FeHA) particles for bone regeneration. Magnetization curves and X-ray diffraction indicate two magnetic particle phases: FeHA and magnetite Fe₃O₄. Magnetic nanoparticles (MNPs) are approximately 30 ± 5 nm in width and 125 ± 25 nm in length, and show typical ferromagnetic properties, including coercivity and rapid saturation magnetization. Scanning electron microscopy (SEM) images of the magnetic scaffolds reveal their complex morphology changes with MNP concentration. Similarly, at compositions of approximately 20% MNPs, the phase separation changes, passing from solid⁻liquid to liquid⁻liquid as revealed by the hill-like structures, with low peaks that give the walls in the SEM images a surface pattern of micro-ruggedness typical of nucleation mechanisms and growth. In vitro degradation experiments, carried out for...
Journal of Nanobiotechnology, 2012
Background: Superparamagnetic nanoparticles (MNPs) have been progressively explored for their potential in biomedical applications and in particular as a contrast agent for diagnostic imaging, for magnetic drug delivery and more recently for tissue engineering applications. Considering the importance of having safe MNPs for such applications, and the essential role of iron in bone remodelling, this study developed and analysed novel biocompatible and bioreabsorbable superparamagnetic nanoparticles, that avoid the use of poorly tolerated magnetite based nanoparticles, for bone tissue engineering applications. Results: MNPs were obtained by doping hydroxyapatite (HA) with Fe ions, by directly substituting Fe 2+ and Fe 3+ into the HA structure yielding superparamagnetic bioactive phase. In the current study, we have investigated the effects of increasing concentrations (2000 μg/ml; 1000 μg/ml; 500 μg/ml; 200 μg/ml) of FeHA MNPs in vitro using Saos-2 human osteoblast-like cells cultured for 1, 3 and 7 days with and without the exposure to a static magnetic field of 320 mT. Results demonstrated not only a comparable osteoblast viability and morphology, but increased in cell proliferation, when compared to a commercially available Ha nanoparticles, even with the highest dose used. Furthermore, FeHA MNPs exposure to the static magnetic field resulted in a significant increase in cell proliferation throughout the experimental period, and higher osteoblast activity. In vivo preliminary results demonstrated good biocompatibility of FeHA superparamagnetic material four weeks after implantation into a critical size lesion of the rabbit condyle.
Au, Pd and maghemite nanofunctionalized hydroxyapatite scaffolds for bone regeneration
Regenerative Biomaterials, 2020
Nanotechnology plays a key role in the development of innovative scaffolds for bone tissue engineering (BTE) allowing the incorporation of nanomaterials able to improve cell proliferation and differentiation. In this study, Mg-HA-Coll type I scaffolds (Mg-HA-based scaffolds) were nanofunctionalized with gold nanorods (Au NRs), palladium nanoparticles (Pd NPs) and maghemite nanoparticles (MAG NPs). Nanofunctionalized Mg-HA-based scaffolds (NF-HA-Ss) were tested for their ability to promote both the proliferation and the differentiation of adipose-derived mesenchymal stem cells (hADSCs). Results clearly highlight that MAG nanofunctionalization substantially improves cell proliferation up to 70% compared with the control (Mg-HA-based scaffold), whereas both Au NRs and Pd NPs nanofunctionalization induce a cell growth inhibition of 94% and 89%, respectively. Similar evidences were found for the osteoinductive properties showing relevant calcium deposits (25% higher than the control) for MAG nanofunctionalization, while a decreasing of cell differentiation (20% lower than the control) for both Au NRs and Pd NPs derivatization. These results are in agreement with previous studies that found cytotoxic effects for both Pd NPs and Au NRs. The excellent improvement of both osteoconductivity and osteoinductivity of the MAG NF-HAS could be attributed to the high intrinsic magnetic field of superparamagnetic MAG NPs. These findings may pave the way for the development of innovative nanostructured scaffolds for BTE.
Journal of The Royal Society Interface, 2013
In biomedicine, magnetic nanoparticles provide some attractive possibilities because they possess peculiar physical properties that permit their use in a wide range of applications. The concept of magnetic guidance basically spans from drug delivery and hyperthermia treatment of tumours, to tissue engineering, such as magneto-mechanical stimulation/activation of cell constructs and mechanosensitive ion channels, magnetic cell-seeding procedures, and controlled cell proliferation and differentiation. Accordingly, the aim of this study was to develop fully biodegradable and magnetic nanocomposite substrates for bone tissue engineering by embedding iron-doped hydroxyapatite (FeHA) nanoparticles in a poly(ε-caprolactone) (PCL) matrix. X-ray diffraction analyses enabled the demonstration that the phase composition and crystallinity of the magnetic FeHA were not affected by the process used to develop the nanocomposite substrates. The mechanical characterization performed through small pu...
Journal of The Royal Society Interface, 2013
In biomedicine, magnetic nanoparticles provide some attractive possibilities because they possess peculiar physical properties that permit their use in a wide range of applications. The concept of magnetic guidance basically spans from drug delivery and hyperthermia treatment of tumours, to tissue engineering, such as magneto-mechanical stimulation/activation of cell constructs and mechanosensitive ion channels, magnetic cell-seeding procedures, and controlled cell proliferation and differentiation. Accordingly, the aim of this study was to develop fully biodegradable and magnetic nanocomposite substrates for bone tissue engineering by embedding iron-doped hydroxyapatite (FeHA) nanoparticles in a poly(ε-caprolactone) (PCL) matrix. X-ray diffraction analyses enabled the demonstration that the phase composition and crystallinity of the magnetic FeHA were not affected by the process used to develop the nanocomposite substrates. The mechanical characterization performed through small pu...
Journal of Bioscience and Bioengineering, 2007
Bone tissue engineering has been investigated as an alternative strategy for autograft transplantation. In the process of tissue engineering, cell seeding into three-dimensional (3-D) scaffolds is the first step for constructing 3-D tissues. We have proposed a methodology of cell seeding into 3-D porous scaffolds using magnetic force and magnetite nanoparticles, which we term Mag-seeding. In this study, we applied this Mag-seeding technique to bone tissue engineering using bone marrow stromal cells (BMSCs) and 3-D hydroxyapatite (HA) scaffolds. BMSCs were magnetically labeled with our original magnetite cationic liposomes (MCLs) having a positive surface charge to improve adsorption to cell surface. Magnetically labeled BMSCs were seeded onto a scaffold, and a 1-T magnet was placed under the scaffold. By using Mag-seeding, the cells were successfully seeded into the internal space of scaffolds with a high cell density. The cell seeding efficiency into HA scaffolds by Mag-seeding was approximately threefold larger than that by static-seeding (conventional method, without a magnet). After a 14-d cultivation period using the osteogenic induction medium by Mag-seeding, the level of two representative osteogenic markers (alkaline phosphatase and osteocalcin) were significantly higher than those by static-seeding. These results indicated that Mag-seeding of BMSCs into HA scaffolds is an effective approach to bone tissue engineering.
Customized hybrid biomimetic hydroxyapatite scaffold for bone tissue regeneration
Journal of Biomedical Materials Research Part B, 2015
Three-dimension (3D) scaffolds for bone tissue regeneration were produced combining three different phases: nanometric hydroxyapatite (HA) was synthesized by precipitation method and the crystals nucleation took place directly within collagen fibrils following a biologically inspired mineralization process; polycaprolactone was employed to give the material a 3D structure. The chemico-physical analysis carried out to test the material's properties and composition revealed a high similarity in composition and morphology with biologically mineralized collagen fibrils and a scaffold degradation pattern suitable for physiological processes. The micro-computerized tomography (micro-CT) showed 53.53% porosity and a 97.86% mean interconnected pores. Computer-aided design and computer-aided manufacturing (CAD-CAM) technology was used for molding the scaffold's volume (design/shape) and for guiding the surgical procedure (cutting guides). The custom made scaffolds were implanted in sheep mandible using prototyped surgical guides and customized bone plates. After three months healing, scanning electron microscopy (SEM) analysis of the explanted scaffold revealed a massive cell seeding of the scaffold, with cell infiltration within the scaffold's interconnected pores. The micro-CT of the explanted construct showed a good match between the scaffold and the adjacent host's bone, to shield the implant primary stability. Histology confirmed cell penetration and widely documented neoangiogenesis within the entire scaffold's volume.
Recent Advances in Hydroxyapatite-Based Biocomposites for Bone Tissue Regeneration in Orthopedics
International Journal of Molecular Sciences
Bone tissue is a nanocomposite consisting of an organic and inorganic matrix, in which the collagen component and the mineral phase are organized into complex and porous structures. Hydroxyapatite (HA) is the most used ceramic biomaterial since it mimics the mineral composition of the bone in vertebrates. However, this biomimetic material has poor mechanical properties, such as low tensile and compressive strength, which make it not suitable for bone tissue engineering (BTE). For this reason, HA is often used in combination with different polymers and crosslinkers in the form of composites to improve their mechanical properties and the overall performance of the implantable biomaterials developed for orthopedic applications. This review summarizes recent advances in HA-based biocomposites for bone regeneration, addressing the most widely employed inorganic matrices, the natural and synthetic polymers used as reinforcing components, and the crosslinkers added to improve the mechanica...